• 대한전자공학회논문지TC
• /
• 제40권1호
• /
• pp.37-46
• /
• 2003

임의로 결선된 디지털 전송선로의 과도응답을 효율적인 노드분할 기법을 사용하여 분석하였다. 제시한 노드분할 기법은 전송선로를 분할하여 해석할 수 있도록 하므로서 연결선의 임의 위치에서의 과도파형을 쉽게 예측할 수 있다. 일반성을 보이기 위해 임의로 연결된 분산특성을 갖는 마이크로스트립 다도체 전송선로들을 예로 들어 분석하였다. 결합선로의 주파수의존성 등가 회로정수들은 스펙트럼 영역 기법(SDA)을 사용하여 도출하였다. 고속 마이크로스트립 결합선로 상에 인가되는 펄스의 펄스폭 변화가 누화에 미치는 영향도 동시에 검토하였다. 선로의 길이와 기판 유전율이 증가하면 누화 피크값이 단조롭게 증가한다는 기존의 결과와는 달리 펄스폭이 수 ps에 이르면 오히려 감소하는 특성을 볼 수 있었다. 제시한 노드분할 기법을 사용한 결과를 일반화된 S-행렬 기법을 사용한 결과와 비교하므로서 타당성을 보였다.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1069-1074
• /
• 2009

A sub-domain method for free vibration analysis of arbitrarily shaped, concave membranes with a deep groove is proposed in the paper. The proposed method divides the concave membrane of interest into two convex regions. The vibration displacement(approximate solution) of each convex region is assumed by linearly superposing plane waves generated at edges of the region. A sub-system matrix for each convex region is extracted by applying a provisional boundary condition to the approximate solution. Finally, a system matrix, which of the determinant gives eigenvalues of the concave membrane, is made by considering the fixed boundary condition(displacement zero condition) at edges and the compatibility condition(the condition of continuity in displacement and slope) at the interface between the two regions. Case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed are compared to those by NDIF method, FEM, or the exact method.

• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.140-145
• /
• 1989

이 논문에서는 ASIC 칩의 설계도면에서 발생하는 임의의 모양을 갖는 영역에서의 효과적인 회로배치 방법인 SOAP (self-organization assisted placement) 를 제안한다. 자율조직이란 Kohonen[1]이 제안한 신경회로망의 학습방법으로 가까이 위치하고 있는 신경소자들이 물리적으로 유사한 외부입력에 민감하도록 소자에 연결된 시냅스 (synapse)의 가중치들을 조절하는 것이다. SOAP에서는 회로 블럭을 신경소자에 회로 블럭의 위치 (x, y좌표)를 해당 신경소자에 연결된 2개의 학습입력으로부터의 시냅스의 가중치 쌍으로 대응시킴으로써 임의의 영역에서의 좋은 회로 배치 결과를 얻을 수 있었다. 이 방법은 또한 입체 표면에서의 회로 배치에도 확장될 수 있다.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.674-680
• /
• 2008

A new meshless method for obtaining natural frequencies of arbitrarily shaped plates with the free boundary condition is introduced in the paper. In order to improve the characteristics of convergence and accuracy of the method, a special local polar coordinates system is devised and located for each of nodes distributed along the boundary of the plate of interest. In addition, a new way of decreasing the size of the system matrix that gives natural frequencies of the plate is employed to reduce the amount of numerical calculations, which is needed for computing the determinant of the system matrix. Finally the excellence of the characteristics of convergence and accuracy of the method is shown in several case studies, which indicate that natural frequencies by the proposed method are very accurate and converged swiftly to exact values as the number of boundary nodes increases.

• 소성∙가공
• /
• 제13권1호
• /
• pp.33-38
• /
• 2004

A new approach for the design of extrusion die surface of arbitrarily shaped section is presented. In order to generate the extrusion die surface. an automatic surface construction method based on B-spline surface and scalar field theory is proposed. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity and effectiveness of the proposed method, automatic surface generation is carried out for extrusion dies of arbitrarily shaped sections.

• Advances in aircraft and spacecraft science
• /
• 제1권2호
• /
• pp.125-143
• /
• 2014

This paper provides a new technique for solving the static analysis of arbitrarily shaped composite plates by using Strong Formulation Finite Element Method (SFEM). Several papers in literature by the authors have presented the proposed technique as an extension of the classic Generalized Differential Quadrature (GDQ) procedure. The present methodology joins the high accuracy of the strong formulation with the versatility of the well-known Finite Element Method (FEM). The continuity conditions among the elements is carried out by the compatibility or continuity conditions. The mapping technique is used to transform both the governing differential equations and the compatibility conditions between two adjacent sub-domains into the regular master element in the computational space. The numerical implementation of the global algebraic system obtained by the technique at issue is easy and straightforward. The main novelty of this paper is the application of the stress and strain recovery once the displacement parameters are evaluated. Computer investigations concerning a large number of composite plates have been carried out. SFEM results are compared with those presented in literature and a perfect agreement is observed.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.127-134
• /
• 2023

Recently, various input shapers have been introduced to reduce residual vibrations of flexible robots. However, there have been no studies on the design of an input shaper that can suppress residual vibration at an arbitrarily specified duration. In this paper, a novel input shaper called an SD (specified-duration) shaper is proposed for an undamped or underdamped system, which can suppress residual vibration at an arbitrarily given specified duration. If the specified duration is larger than a half period, a positive SD shaper composed of all positive impulses is designed, and if the specified duration is smaller than a half period, a negative SD shaper including a negative impulse is designed. As the specified duration is increased every half period after a half period, the number of impulses of the positive SD shaper is increased one by one, and the robustness of the SD shaper to modeling errors is increased. The performance of the SD shaper is analyzed through simulation studies for an undamped and underdamped second-order systems. The validity of the SD shapers is demonstrated experimentally using an experimental device that can generate container transport motions.

• Structural Engineering and Mechanics
• /
• 제34권6호
• /
• pp.805-808
• /
• 2010

• 전자공학회지
• /
• 제28권10호
• /
• pp.102.1-102
• /
• 2001

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.55-62
• /
• 2000

In constructing a synthetic seismogram using ray-tracing method a suite of ray-code is required to obtain a realistic seismogram which is similar to the actual seismogram or earthquake record under consideration. An infinite number of rays exist for any arbitrarily located source and receiver. One select only a finite number of such rays in computing a synthetic seismogram so their selection becomes important to the validity of the seismogram being generated. Missing certain important rays or an inappropriate selection of ray-codes in tracing rays may result in wrong interpretation of the earthquake record or seismogram. Automatic ray-code generation will eliminate such problems. In this study we have developed an efficient algorithm, with which one can generate systemastically all the ray-codes connecting source and receiver arbitrarily located. The result of this work will helpful in analysing multiple reflections in seismic data processing as well as simulating Lg wave and multiply reflected or converted phases in earthquake study.