• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.459-467
• /
• 2016

LISFLOOD-FP model in which channel flows are resolved separately from the floodplain flows using either a kinematic or diffusive wave approximation has been used to analyze flooding behavior on the lower Mankyung River influenced by backwater. A calibration and validation process was applied using the previous flood events to assess the model performance. Sensitivity analysis was conducted for main calibrated parameters, such as Manning roughness coefficient and downstream boundary condition. Also, we examined the effect of warm-up for the initial conditions. The results show that the computed hydrograph is in good agreement with measured data on the study reach, even though it was a hydrologic kinematic wave model. The sensitive analysis show that the difference between the computed results may be greater depending on the used calibrated parameters and that the sufficient calibration/validation process against various flood events is necessary. If the flood inundation simulation is performed using the validated model, it is expected to be able to contribute about river planning and policy decision-making for flood damage reduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.479-485
• /
• 2006

The double gate(DG) MOSFET is a promising candidate to further extend the CMOS scaling and provide better control of short channel effect(SCE). DGMOSFETs, having ultra thin undoped Si channel for SCEs control, ale being validated for sub-20nm scaling. A novel analytical transport model for the subthreshold mode of DGMOSFETs is proposed in this paper. The model enables analysis of short channel effect such as the subthreshold swing(SS), the threshold voltage roil-off$({\Delta}V_{th})$ and the drain induced barrier lowering(DIBL). The proposed model includes the effects of thermionic emission and quantum tunneling of carriers through the source-drain barrier. An approximative solution of the 2D Poisson equation is used for the distribution of electric potential, and Wentzel-Kramers-Brillouin approximation is used for the tunneling probability. The new model is used to investigate the subthreshold characteristics of a double gate MOSFET having the gate length in the nanometer range $(5-20{\sim}nm)$ with ultra thin gate oxide and channel thickness. The model is verified by comparing the subthreshold swing and the threshold voltage roll-off with 2D numerical simulations. The proposed model is used to design contours for gate length, channel thickness, and gate oxide thickness.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.91-97
• /
• 2014

A high resolution numerical method aimed at solving cavitating flow was proposed and applied to gas-liquid two-phase shock tube problem with arbitrary void fraction. The present method with compressibility effects employs a finite-difference 4th-order Runge-Kutta method and Roe's flux difference splitting approximation with the MUSCL TVD scheme. The Jacobian matrix from the inviscid flux of constitute equation is diagonalized analytically and the speed of sound for the two-phase media is derived by eigenvalues. So that the present method is appropriate for the extension of high order upwind schemes based on the characteristic theory. By this method, a Riemann problem for Euler equations of one dimensional shock tube was computed. Numerical results of high speed flow phenomena such as detailed observations of shock and expansion wave propagations through the gas-liquid two-phase media and some data related to computational efficiency are made. Comparisons of predicted results and solutions at isothermal condition are provided and discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.56-65
• /
• 2001

This paper proposes an algorithm for the capacitance extraction of general 3-dimensional conductors in an ideal uniform dielectric that uses a high-order quadrature approximation method combined with the typical first-order collocation method to enhance the accuracy and adopts an efficient matrix-vector product algorithm for the model-order reduction to achieve efficiency. The proposed method enhances the accuracy using the quadrature method for interconnects containing corners and vias that concentrate the charge density. It also achieves the efficiency by reducing the model order using the fact that large parts of system matrices are of numerically low rank. This technique combines an SVD-based algorithm for the compression of rank-deficient matrices and Gram-Schmidt algorithm of a Krylov-subspace iterative technique for the rapid multiplication of matrices. It is shown through the performance evaluation procedure that the combination of these two techniques leads to a more efficient algorithm than Gaussian elimination or other standard iterative schemes within a given error tolerance.

• Korea-Australia Rheology Journal
• /
• v.20 no.2
• /
• pp.59-63
• /
• 2008

A theoretical model was developed to describe the flow behavior of a filled polymer in the packing stage of reaction injection molding and predict the residual stress distribution of thin injection-molded parts. The model predictions were compared with experiments performed for phenol-formaldehyde resin filled with wood dust and cured by urotropine. The packing stage of reaction injection molding process presents a typical example of complex non-isothermal flow combined with chemical reaction. It is shown that the time evolution of pressure distribution along the mold cavity that determines the residual stress in the final product can be described by a single 1D partial differential equation (PDE) if the rheological behavior of reacting liquid is simplistically described by the power-law approach with some approximations made for describing cure reaction and non-isothermality. In the formulation, the dimensionless time variable is defined in such a way that it includes all necessary information on the cure reaction history. Employing the routine separation of variables made possible to obtain the analytical solution for the nonlinear PDE under specific initial condition. It is shown that direct numerical solution of the PDE exactly coincides with the analytical solution. With the use of the power-law approximation that describes highly shear thinning behavior, the theoretical calculations significantly deviate from the experimental data. Bearing in mind that in the packing stage the flow is extremely slow, we employed in our theory the Newtonian law for flow of reacting liquid and described well enough the experimental data on evolution of pressure.

• Journal of Korean Academy of Nursing
• /
• v.39 no.5
• /
• pp.700-708
• /
• 2009

Purpose: This study was done to test the validity and reliability of the Adolescent Mental Problem Questionnaire (AMPQ) for Korean high school students. Methods: The AMPQ was designed to assess adolescents', mental health status and problem behavior (Ahn, 2006). A methodological study design was used with exploratory factor analysis, Pearson's correlation coefficients, and a fitness of the modified model for validity. Also, Cronbach's alpha coefficients and alternative-form method for reliability were used. AMPQ was tested with a sample of 36,313 high school students. The participants consisted of 18,701 males and 17,612 females. Results: Seven factors were extracted through factor analysis: 'Psychiatric problems', 'Delinquency', 'Academic troubles', 'Family problems', 'Hazardous behavior', 'Harmful circumstance', 'Eating problems'. These factors explained 51.1% of the total variance. The fitness of the modified model was good ($X^2$=38,413.76, Goodness of Fit Index [GFI]=.94, Adjusted Goodness of Fit Index [AGFI]=.93, Comparative Fit Index [CFI]=.95, Root Mean Square Error of Approximation [RMSEA]=.05), and concurrent validity with Korea-Youth Self-Report [K-YSR] was .63. Cronbach's alpha coefficient of the 31 items was .85. Conclusion: The results of present study suggest that the modified AMPQ instrument may be useful for efficiently assessing mental health status and problem behavior in late adolescent, high school students.

• Research in Community and Public Health Nursing
• /
• v.28 no.4
• /
• pp.513-523
• /
• 2017

Purpose: We evaluated the psychometric properties of a questionnaire on the acceptance of the quality improvement information system (QIIS) among long-term care workers (mostly nurses). Methods: The questionnaire composes of 21 preliminary questions with 5 domains based on the Technology Acceptance Model and related literature reviews. We developed a prototype web-based comprehensive resident assessment system, and collected data from 126 subjects at 75 long-term care facilities and hospitals, who used the system and responded to the questionnaire. A priori factor structure was developed using an exploratory factor analysis and validated by a confirmatory factor analysis; its reliability was also evaluated. Results: A total of 16 items were yielded, and 5 factors were extracted from the explanatory factor analysis: Usage Intention, Perceived Usefulness, Perceived Ease of Use, Social Influence, and Innovative Characteristics. The five-factor structure model had a good fit (Tucker-Lewis index [TLI]=.976; comparative fit index [CFI]=.969; standardized root mean squared residual [SRMR]=.052; root mean square error of approximation [RMSEA]=.048), and the items were internally consistent(Cronbach's ${\alpha}=.91$). Conclusion: The questionnaire was valid and reliable to measure the technology acceptance of QIIS among long-term care workers, using the prototype.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1165-1174
• /
• 2016

The energy band gaps and the bowing parameters of zincblende InAs1-xN are determined by using an empirical pseudopotential method(EPM) within the improved virtual crystal approximation(VCA), which includes the disorder effect. The direct-band-gap bowing parameter calculated by using the EPM is 4.1eV for InAs1-xNx ($0{\leq}x{\leq}0.05$). The dependences of the band gaps of N-dilute InAs1-xNx on the temperature and composition are calculated by modifying the band anti-crossing(BAC) model. The calculation results are consistent with experimental values, and the coupling parameter CMN of InAs1-xNx is found to be equal to 1.8 by fitting the EPM data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1815-1821
• /
• 2006

In this paper, the subthreshold swing has been analyzed for FinFET under channel length of 20nm. The analytical current model has been developed , including thermionic current and tunneling current models. The potential distribution by Poisson equation and carrier distribution by Maxwell-Boltzman statistics are used to calculate thermionic emission current and WKB(Wentzel-Kramers-Brillouin) approximation to tunneling current. The cutoff current is obtained by simple adding two currents since two current is independent. The subthreshold swings by this model are compared with those by two dimensional simulation and two values agree well. Since the tunneling current increases especially under channel length of 10nm, the characteristics of subthreshold swing is degraded. The channel and gate oxide thickness have to be fabricated as am as possible to decrease this short channel effects, and this process has to be developed. The subthreshold swings as a function of channel doping concentrations are obtained. Note that subthreshold swings are resultly constant at low doping concentration.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.281-287
• /
• 1994

The present paper deals with numerical modeling of Love channel waves in transversely isotropic elastic medium. First, an explicit finite-difference scheme of second order approximation is formulated with the wave equation of SH particle displacement in transversely isotropic medium. Since it is a heterogeneous formulation, it should enable efficient modeling of complex model structures without additional treatment of the internal boundary matching. With a model of isotropic coal seam embedded in high velocity host rock, seismograms are synthesized and tutn out to be essentially identical with published ones of Korn and $St{\ddot{o}}ckl$. Next, anisotropic coal seams are investigated. It is found that the horizontal velocity of the seam appears to play a major role of determining the group velocity of Love channel waves. The group velocity increases with the increase of the horizontal velocity or vice versa. However, further study will be needed to exploit fully Love channel waves for the determination of lithology, stratification, fracture in sedimentary rocks, for instance, for hydrocarbon exploration and development.