• The Korean Journal of Applied Statistics
• /
• v.27 no.7
• /
• pp.1243-1255
• /
• 2014

This study is aimed at developing an index and indicator in the light of social factors by analyzing the basic materials on Korean working conditions survey to make it possible to grasp various working environment factors consequent on business type and to judge the industrial safety & health policy of the related area. For the purpose of developing an index, this study was conducted by benchmarking the OECD-suggested index development guidelines and overseas cases of index development. This study suggested indexes related to health by benchmarking OECD's press-state-response model. The press-state health-related indexes specified in Korean working condtions survey were found to consist of physical risk environment, working hours, business environment, and social environment, and its consequent 'state' items were comprised of mental health, physical health, absence from work due to health problems and work satisfaction as health-related items. As a result, it was found that the 'press-state index' for wage worker, regular employee, manager, clerks, expert & related personnel involved, and workers aged under 50 was relatively good; in contrast, the 'press-state index' for people aged over 50, owner-operator, daily job, skilled position in agriculture & fisheries, simple labor service, and apparatus & machines assembly worker was found to be relatively vulnerable.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.77-87
• /
• 2008

This study is to formulate strategy for subject who are selected as national team in horizontal bars event in apparatus gymnastics. For this, skill training program was applied to players for 8 weeks. Then it was analyzed by using 3D motion Analysis system to seek the difference between before and after using the program. There were decisive demerit element K's first try for Tkatchev stretched movement from low elevation and crooked body while elevating. Not only, the location of his center of mass is far and low and there was some concern in his landing due to bended his hip-joint, but also, it exposed weak point in retro-action followed technique. Thus, to overcome that weak point, the subject repeated practices on following; when preparing for Tkatchev stretched movement at downward for big spin, make sure extend shoulder angle faster, make sure Tap movement is short and concise using hip-joint angular while delaying Tap timing for folding the body, and moreover, while backlashing the body, used shoulder joint angle wide to pull up the body. As a result, the speed of vertical upward did rut increase when separation from the bar. However, height of elevation increased that the leg would rut hit the horizontal bar even straight up the hip-joint. Therefore, the movement itself provided magnificent motion and even helped decrease the demerits.

• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.3
• /
• pp.116-126
• /
• 1995

The purpose of this study was to investigate the removal of ammonium nitrogen by biological nitrification in raw water containing LAS using BAC. At batch teats, LAS removal by ozone followed the first order reaction, and the rate constants(k) by ozone dose 1, 3mg/min.L were $0.040min^{-1}$, $0.062min^{-1}$ respectively. Therefore, the more ozone was dosed, the higher LAS was removed The reaction between ozone and ammonium nitrogen also followed the first order, and rate constants(k) at pH7,8 and 9 were $8.9{\times}10^{-4}min-1$, $3.8{\times}10^{-3}min^{-1}$, and $2.9{\times}10^{-2}min^{-1}$ respectively at ozone dose of 3mg/min.L . Therefore, ammonium nitrogen was little removed by ozone under neutral pH of 7. The continuous flow apparatus had four sets composed of a ozone contacter and a GAC column. Through continuous filtration test for 50days, the following conclusions were derived; (1) LAS was removed 23%, 30% respectively by ozone dose 1, 3mg/L, and was not detected in all column effluents during the period of experiment. Therefore, it appeared that adsorption capacities of each column still remained. (2) Ammonium nitrogen concentration after ozone contact varied little in raw Water because pH of raw water was from 6 to 7, and was transfered to nitrite and nitrate within GAC columns as the result of staged nitrification. After 30days, nitrite was not detected in all column effluents due to biological equilbrium between nitro semonas and nitrobacter Average removals of ammonium nitrogen in each column after the lapse of 30days were the following; ${\cdot}$ column A (ozone dose 3mg/L, EBCT 9.5min): about 100% ${\cdot}$ column B (ozone dose 1mg/L, EBCT 9.5min): 91% ${\cdot}$ column C (ozone dose 3mg/L, EBCT 14.2min): about 100% ${\cdot}$ column D (ozone dose 0mg/L, EBCT 9.5min): 53% Though column A and C reached nitrification of about 100%, column C (longer EBCT than column A) was more stable than column A. (3) After backwash, nitrification reached steady state within 5 to 8 hours. Therefore, nitrification was not greatly affected by backwash. (4) According to the nitrification capacity in depth of column A, C, where 100% nitrification occured. LAS was removed within 20cm, while ammonium nitrogen required more depth to be removed by nitrification.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.1
• /
• pp.8-11
• /
• 1979

The apparatus for measuring the static withdrawal resistance of nail is the AUTOGROPH S-500 static testing machine. The nails were 0.25 - 0.26 cm in diameter, 4.9-5.1cm in length, and were driven into wood for a depth of 3.0 cm. The physical properties of wood specimens are shown in table 1. Some data obtained in this experiment are as follows 1) The effects of the direction of driving and the time after driving upon static withdrawal resistance are shown in fig. 2-3. 2) The relations between static withdrawal resistance are moisture content of wood are characterized by nearly straight line as shown in fig. 4-5. The empirical formula areas follows: Y = -0.074 x + 12.73 (Pinus koraiensis Sieb & Zucc. - radial) Y = -0.073 x + 7.54 (Pinus koraiensis Sieb & Zucc. - longitudinal) Y = -0.061 x + 12.80 (Larix leptolesis Gord. - tangential) Y = -0.081 x + 7.61 (Larix leptolepsis Gord. - longitudinal) Where Y is the static withdrawal resistance ($kg{\cdot}cm$) and x is the moisture content(%).

• Journal of Korea Water Resources Association
• /
• v.43 no.5
• /
• pp.445-453
• /
• 2010

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze head losses at manholes, especially in case of surcharged flow. Hydraulic experimental apparatus which can change the manhole shape (square, circular) were installed for this study. In the experiments, two inflows ($Q_1,\;Q_2$) were varied from 0 to $4{\ell}$/sec and 15 combinations were tested in total. The flow ratios $Q_2/Q_3$ were varied from 0 to 1 for a total flow $Q_3$ ($Q_3=Q_1+Q_3$) of 2, 3, and $4{\ell}$/sec, respectively. The variation of head losses were strongly influenced by the lateral inflow because the head loss coefficient increases as the flow ratio $Q_2/Q_3$ increases. There was no significant difference of head loss between square manhole and circular one, and also no large variation of head loss as discharges change. The relation equations between K and $Q_2/Q_3$ were suggested in this paper.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.343-351
• /
• 2015

In this study, we synthesis polyimide with high gas selectivity using 2,2-bis(3,4-carboxylphenyl) hexafluoropropane, 2,4,6-Trimethyl-1,3-phenylenediamine (DAM) and 4,4-Methylenedianiline (p-MDA), and then the asymmetric membrane was fabricated by non-solvent phase separation method. To confirm the property change of the membrane using different solvent, we measured and compared the viscosity of the polymer solution, cloud point and non-solvent phase separation coefficient. The morphology and gas separation property of membrane prepared by phase separation method was confirmed using Field Emission Scanning Electron Microsope and the single gas permeation measurement apparatus. The single gas ($CH_4$, $N_2$, $O_2$, $CO_2$) permeation property and selectivity value of the membrane prepared with NMP was higher than the membrane prepared with DMAc. We confirmed that the gas selectivity of the membrane increased and the permeation property decreased with increasing of the solvent evaporation time.

• Korean Journal of Childcare and Education
• /
• v.11 no.6
• /
• pp.177-198
• /
• 2015

This study is aimed at a comparison analyzing the contents of child 'safety education' in Three-four-year-old Nuri curriculum manual for teachers related activity type and activity form, life theme based on the criteria of analysis. First, the number of contents of child 'safety education' included in the 3 year old Nuri curriculum manual for teachers was 136, and among them, 71(52.2%) were from in big and small group activity. Total 124 contents were in 4-year old group and showed 58(46.8%) contents in big and small group activity. Second, it was identified that the Three-four-year-old Nuri curriculum handled highest number of child 'safety education' activities. Twenty-five activities from 'appliances' among a total of 127 child 'safety education' activities were included and included 21 activities in contents of 'safety for object, tool, and apparatus.' Thirty-three activities among 'health and safety' among a total of 131 child 'safety education' activities were included and it was identified that the highest number of child 'safety education' activities were conducted in 'safety for disease' contents. It will be hope to suggest some of the providing child 'safety education' of Three-four-year-old in education field, and to provide basic data for planning and suggesting directions for various training related to child safety education. Moreover, this study intends to provide basic data for composing necessary manual and program for child 'safety education' and to provide basic data for expanding the safety experience facility.

• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.133-136
• /
• 2016

In this study, we have constructed a measuring system to investigate tensile stress of tendons, which is employed in bridges, by means of the magnetic non-destructive testing (NDT) method. For the twisted 7-strands tendon, we have used Wiedemann effect. An ac current was applied to the tendon and voltage induced from Search Coil on Tendon (SCT) under applying tensile stress was measured. The measuring system consists of tensile stress applying apparatus up to 2 GPa, and ac current supply to apply current to the tendon directly to magnetize the tendon. We have invested two kinds of tendon which were produced by different companies for testing with constructed measuring system. Voltage induced from SCT was decreased up to 1.5 GPa linearly and two kinds of tendon which were produced by different companies shows similar trends. Thus, Wiedemann effect was also applicable to measure tensile stress of tendon by means of magnetic NDT.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.221-226
• /
• 2014

In this paper, we achieved the study which determined the excellent diagnostic condition and searched the exposure condition with the minimum radiation exposure level having the equal diagnostic ability. To accomplish these study, chest phantom images with lesions and without ones were evaluated at various exposure conditions. With respect to the phantom with lesions and without ones, we obtained the chest PA imaging applied by photographing parts of DR apparatus and the images processed as histogram equalization and edge enhancement method. The images were acquired at the exposure conditions of 2.0, 2.5, 3.2, 4.0 and 5.0mAs. The morphological analysis was performed by ROC curves using the images obtained at each exposure condition. The exposure conditions with the most excellent diagnostic ability and with the equal diagnostic capability having the minimum radiation exposure level were determined by means of sensitivity, specificity and accuracy.

• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.211-220
• /
• 2002

It has not been long since the current form of PDA began to be used widely. The PDA, which first came out in a recognizable form in the market a decade ago, multiplying the number of users, has recently been developed in various forms. It began to make cutting-edge technology available in PDA, and to be subdivided into various forms appropriate for special purposes, which reflected the recent intense competition in the market. It included the function of mobile phone, in tandem with the original function of PDA, by which it brought about other synergy effects and corresponded with the purpose more solidly. Due to these recent changes, PDA has had a dramatically increasing number of users, as well as the wider scope of usage and practical application by introducing new technology. However, research is required in the fields of basic usage and interface. It is important to recognize that PDA is an apparatus that stores for the users contents and information suitable for them, and that responds to them in case of need. PDA therefore needs to convey what the users require more easily and speedily without errors, and to provide them with appropriate information and contents. This paper examined the extent to which the interface of PDA including the input of contents required by the user would be efficient by questionnaires. In addition, alternatives concerning a general application environment of PDA were suggested based on the result of this survey.