• 접착 및 계면
• /
• 제5권2호
• /
• pp.14-26
• /
• 2004

For reliable determination of mechanical characteristics of adhesively bonded joints used e.g. as input data for computer-aided design of complex components, the thick-adherend tensile-shear test according to ISO 11003-2 is the most important material testing method. Although the total displacement of the joint is measured across the polymer layer directly in the overlap zone in order to minimize the influence of the stepped adherends, the substrate deformation must be taken into account within the framework of the evaluation of the shear modulus and the maximum shear strain, at least when high-strength adhesives are applied. In the standard ISO 11003-2 version of 1993, it was prescribed to perform the substrate deformation correction by means of testing a one-piece reference specimen. The authors, however, pointed to the excessive demands on the measuring accuracy of the extensometers connected with this technique in industrial practice and alternatively proposed a numerical deformation analysis of a dummy specimen. This idea of a mathematical correction was included in the revised ISO 11003-2 version of 2001 but in the simplified form of an analytical method based on Hooke's law of elasticity for small strains. In the present work, it is shown that both calculation techniques yield considerably discordant results. As experimental assessment would require high-precision distance determination (e.g. laser extensometer), finite element analyses of the deformation behavior of the bonded joint are performed in order to estimate the accuracy of the obtained substrate deformation corrections. These simulations reveal that the numerical correction technique based on the finite element deformation modeling of the reference specimen leads to considerably more realistic results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권3호
• /
• pp.330-335
• /
• 2012

Brushless doubly-fed machine (BDFM) doesn't use brush and slip ring, and has advantages such as high system reliability, small capacity of its frequency converter, low system cost, adjustable power factor and speed, etc. At the same time, it has good applicable potentials on the variable frequency motors and the variable speed constant frequency generators. However, due to the complicacy and particularity of BDFM in the structure and operating mechanism, the effect of magnetic field modulation directly influences the operating efficiency of BDFM. To study the effect of different cage rotor structures on the magnetic field modulation of BDFM, the rotor magnetomotive force (MMF) of BDFM with cage rotor is studied by the analytical method. The components and features of rotor harmonic MMFs are discussed. At the same time, the method to weaken the higher harmonics is analyzed by the theoretic formulae. Furthermore, the magnetic field modulation mechanism is expounded on in detail and the relationship between the magnetic field modulation effect and the operating efficiency of BDFM is established. And then, a new method for estimating the magnetic field modulation effect is proposed. At last, the magnetic field modulation effects of four BDFM prototypes with different cage rotor structures are compared by the MMF analysis and the efficiency data of electromagnetic design. The results verify the effectiveness of the new method for estimating the magnetic field modulation effect of BDFM with cage rotor.

• 한국지진공학회논문집
• /
• 제8권1호
• /
• pp.39-58
• /
• 2004

성능에 기초한 내진설계 분야에서 구조물의 내진성능평가를 위해서는 비탄성 지진거동을 보다 정확하게 예즉할 필요가 있다. 성능기초 설계기준에 반영되어 있는 내진성능 평가 방법 가운데 하나인 pushover해석을 이용한 방법은 몇몇 연구자들에 의하여 다양한 해석 방법론이 개발되었다. 이 방법을 사용하여 비탄성 전체 또는 국부적 지진응답을 보다 정확하게 평가하기 위해서는 사용되는 횡하중 분배가 구조시스템과 지반운동의 동적특성에 부합되도록 반영되어야 한다. 그리고 구조물의 변형능력을 합리적으로 평가하여 성능점을 보다 정확하게 산정해야 한다. 본 연구에서는 개선된 적응적 횡하중 분배방법과 건물의 등가응답을 이용하여 비탄성 지진응답을 정확하고 효율적으로 평가할 수 있는 방법을 제안하였다. 제안된 방법은 건물의 전체 비탄성 거동에 대한 내진성능을 평가하고 국부적인 비탄성 지진응답을 정확하게 산정하는데 사용될 수 있다. 또한 제안된 방법의 정확성과 타당성을 검증하기 위해서 비탄성 시간이력해석과 기존의 다른 해석방법들에 의한 비탄성 지진응답과 비교하였다.

• 대한전자공학회논문지TC
• /
• 제42권10호
• /
• pp.39-50
• /
• 2005

본 논문에서는 IEEE 802.11 WLAN의 MAC인 DCF의 성능을 개선하는 알고리즘을 제안하고 이를 수학적으로 분석한다. IEEE 802.11 WLAN의 MAC에서는 데이터를 전송하기 위한 방법으로 "Distributed Coordination Function(DCF)"과 "Point Coordination Function(PCF)"를 사용하며, DCF의 경우 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)를 기반으로 한다. CSMA/CA는 단말 간의 충돌을 줄이기 위해서 임의의 backoff time을 각 단말의 contention window(CW) 범위에서 결정한다. 단말은 패킷 전송 후 충돌시 윈도우 크기를 두배로 증가시키며, 성공적인 전송 후에는 윈도우 크기를 최소 CW로 감소하게 된다. 본 논문에서는 패킷의 정상적인 전송 후에 윈도우 값을 서서히 감소함으로써 현재 WLAN의 망 상태정보를 계속 활용함으로써 패킷 충돌 확률을 낮추는 알고리즘을 제안하였고, 불포화상태에서의 전송량에 대한 수학적 분석을 하였다 또한, 시뮬레이션을 통해 WLAN의 포화상태에서 전송량이 향상되었음을 보였고, 수학적 분석 결과와 시뮬레이션 결과가 일치함을 확인하였다.

• 전자공학회논문지SC
• /
• 제44권3호
• /
• pp.9-13
• /
• 2007

대부분의 공학 시스템은 비선형 시스템이지만 비선형 요소가 어떤 바운드된 섹터 내에서만 존재할 때 이러한 비선형 시스템을 통상 Lure-Postnikov system이라 부르며 기계 시스템에서 자주 직면하게 된다. Lure-Postnikov system을 안정화 시키는 제어기를 해석하는 방법에 대해서는 그동안 상당한 연구가 이루어져 왔지만 PID 혹은 저차 제어기와 같은 고정된 구조를 갖는 제어기의 설계에 대한 연구는 아직 미미한 상태이다. 본 논문에서는 하나의 실수 다항식과 허수 다항식의 패밀리를 Hurwitz 다항식으로 만드는 제어 변수의 조합을 선형 부등식을 통하여 구하는 최근의 연구 결과를 이용하여 Lure-Postnikov system을 안정화 시키는 제어기를 체계적으로 설계하는 새로운 방법을 제시하고자 한다. 이 방법은 무기체계 시스템에서 흔히 쓰이는 유연한 단일 링크를 갖는 로봇 시스템에 적용하여 임의의 차수의 제어기를 체계적으로 설계할 수 있음을 보여준다.

• 한국전자거래학회지
• /
• 제22권2호
• /
• pp.99-121
• /
• 2017

모든 영역에서 조직의 디지털 자산을 보호하기 위해, 보안 규제를 강제하고 있는 추세이다. 문제는 조직 내의 보안 통제장치 가운데 투입된 노력이나 보안 수준을 외부에서 확인할 수 없는 통제장치가 존재한다는 것이다. 이 논문에서는 확인할 수 없는 통제장치가 존재하는 경우, 합리적인 보안 수준이 무엇인지 불완전 계약이론을 적용하여 분석하였다. 이를 위해, 확인할 수 없는 통제장치를 무시하는 경우의 비이성적 규제(naive standard)와 모두 확인할 수 있다고 가정할 경우의 완전정보하의 규제와 비교 분석하였다. 결과는 통제장치의 구성에 따라 달라졌다. 우선 평형구성(parallel configuration)하에서는 완전정보하의 규제와 최적규제가 동일하였으며, 순차구성(serial configuration)하에서는 최적규제 수준이 낮아야 하며, 다른 비교대상 규제와는 차이를 보였다. 최적구성(best shot configuration)하에서 확인가능한 통제장치가 비용 효율성이 높은 경우, 흥미롭게도 비합리적 규제가 최적규제수준과 동일한 것으로 나타났다.

• 대한간호학회지
• /
• 제24권1호
• /
• pp.96-114
• /
• 1994

This study was carried out to describe and analyze experimental studies conducted in graduates nursing degree. Of 170 experimental studies conducted during the past three decades between 1962 and August 1991, 150 studies were available, including 124 master’s and 26 doctoral theses. This study examined their general characteristics and detailed research methods using percentiles. The results were as follows 1. Most of the studies adopted a quasi-experimental design. 2. The subjects of the studies were chosen by convenience sampling except for two studies whose subjects were drawn by randomization. Studies comparing experimental and control groups were in the highest proportion and the most frequent sample sizes of each group were 21 to 30 for both experimental and control groups. 3. As to measurement, physiological measures were most frequent followed by psychsociological measures and active report questionnaires. Each study, on average, adopted two kind of measurement tools. Studies in which the data collection period was of 1~2 months were in the highest pro-portion. 4. All doctoral theses and 67.0% of master’s theses examined specific research hypotheses. Of these studies, the results of 92.5% supported the hypotheses. 5. Parametric statistics were the major analytical methods. In particular, t-test was used most frequently followed by Chi square, F-test, and Pearson Correlation Coefficients. 6. Patients were the most frequent study subjects. Frequent nursing interventions were information and education followed by support, distraction, and nursing treatments. 7. With regards to the dependent variables, “feelings” such as anxiety, pain, and depression were most frequent. In addition “exchanging” such as restoring, metabolism, cardiopulmonary function, infection and vital signs were adopted as the dependent variables in 29.1％ of the studies examined, while 12.3% of the studies selected “choosing” such as stress, health behavior, or role performance.

• 한국통신학회논문지
• /
• 제29권4A호
• /
• pp.429-438
• /
• 2004

본 논문에서는 WCDMA 시스템을 위한 판정궤환 동기식 동기추적 회로 (decision-feedback coherent code tracking loop)를 설계하고 AWGN 환경과 페이딩 환경에서 위상 에러와 심볼 에러의 영향을 고려하여 지터 분산을 해석한다. 먼저, AWGN 환경에서의 지터 분산을 위상 에러와 비트 오율을 포함하여 펄스성형 필터(pulse-shaping filter), 타이밍 오프셋 (timing offset), 신호 대 잡음비 (signal-to-interferences ratio), 루우프 대역폭(loop-bandwidth)에 대한 일반식으로 유도하고 페이딩 환경에서 지터 분산의 상한치 (upper bonnd)를 유도한다. 끝으로, WCDMA 순방향 링크의 DPCH 프레임 포맷 #13을 목표 시스템(target system)으로 설정하여 2차 동기식 등기추적 회로를 설계하고 AWGN 환경과 Rayleigh 페이딩 환경에서 지터 분산의 이론치와 시뮬레이션 결과를 비교, 분석한다.

• Genomics & Informatics
• /
• 제12권4호
• /
• pp.268-275
• /
• 2014

The harshness of legionellosis differs from mild Pontiac fever to potentially fatal Legionnaire's disease. The increasing development of drug resistance against legionellosis has led to explore new novel drug targets. It has been found that phosphoglucosamine mutase, phosphomannomutase, and phosphoglyceromutase enzymes can be used as the most probable therapeutic drug targets through extensive data mining. Phosphoglucosamine mutase is involved in amino sugar and nucleotide sugar metabolism. The purpose of this study was to predict the potential target of that specific drug. For this, the 3D structure of phosphoglucosamine mutase of Legionella pneumophila (strain Paris) was determined by means of homology modeling through Phyre2 and refined by ModRefiner. Then, the designed model was evaluated with a structure validation program, for instance, PROCHECK, ERRAT, Verify3D, and QMEAN, for further structural analysis. Secondary structural features were determined through self-optimized prediction method with alignment (SOPMA) and interacting networks by STRING. Consequently, we performed molecular docking studies. The analytical result of PROCHECK showed that 95.0% of the residues are in the most favored region, 4.50% are in the additional allowed region and 0.50% are in the generously allowed region of the Ramachandran plot. Verify3D graph value indicates a score of 0.71 and 89.791, 1.11 for ERRAT and QMEAN respectively. Arg419, Thr414, Ser412, and Thr9 were found to dock the substrate for the most favorable binding of S-mercaptocysteine. However, these findings from this current study will pave the way for further extensive investigation of this enzyme in wet lab experiments and in that way assist drug design against legionellosis.