• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.4
• /
• pp.479-484
• /
• 2006

This paper discusses a fitness of the control on intersection using fuzzy analytic hierachy process. The validity of control of traffic signal on intersection is the fitness of phase and cycle on the intersection. The validity of the controller is cleared by the comparison of the delay time of vehicle. Fuzzy analytic hierachy process clears the grade of validity of the fixed cycle time controller and adaptive fixed cycle time and fuzzy trafic controller and proposes a new control type a traffic signal by this fuzzy analytic hierachy process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2631-2635
• /
• 2002

The semi-analytic sensitivity analysis using Pade approximation is presented for linear elastic structures. Although the semi-analytic method has several advantages, accuracy of the method prevents it from practical application. One of promising remedies is the use of geometric series for the matrix inversion. Though series expansion of order three has been successfully applied to the calculation of the structural sensitivity in the most range of the design perturbation, it is prone to have a slow convergence for large perturbation. To overcome this shortage, Pade approximation is introduced so that it can broaden the trust region of the perturbation without adding expansion terms. Numerical results show that the confident sensitivity can be obtained with tiny expenses of computation effort.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.156-164
• /
• 1996

Tool interference is one of the most critical problems in machining die cavities and punches. When machining concave or convex regions of cavities with large radius tool in rough cutting, the tool easily overcuts or undercuts the portions of the surface, which result in machining inaccuracy. So the generation of interference-free tool path must be required for more efficient rough cutting. In this paper, we present a method for modeling die cavities which consist of simple surface or analytic compoyund surfaces and present an algorithm for checking and removing the tool interference occurred in machining the die cavities. Using these algorithms, we can represent a die cavity, and check the interfer- ence regions, and then remove these interferences. Especially we focus on the side interference in the sides of analytic elements and base surface boundary.

• Honam Mathematical Journal
• /
• v.35 no.1
• /
• pp.51-71
• /
• 2013

In the present paper, we evaluate the analytic conditional Fourier-Feynman transforms and convolution products of unbounded function which is the product of the cylinder function and the function in a Banach algebra which is defined on an analogue o Wiener space and useful in the Feynman integration theories and quantum mechanics. We then investigate the inverse transforms of the function with their relationships and finally prove that th analytic conditional Fourier-Feynman transforms of the conditional convolution products for the functions, can be expressed in terms of the product of the conditional Fourier-Feynman transforms of each function.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.5-11
• /
• 2006

One of the most important is to insure that a new circuit design is qualified far release before it is scheduled for manufacturing, test, assembly and delivery. Due to various causes, there happens to be a low yield in the wafer process. Wafer test is a critical process in analyzing the chip characteristics in the EDS(electric die sorting) using analytic tools -wafer map, wafer summary and datalog. In this paper, we propose new analytic map algorithms for DDI chip test data. Using the proposed analytic map algorithms, we expect to improve the yield, quality and analysis time.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.1
• /
• pp.1-6
• /
• 2017

Recently, many motor analysis methods have been developed and studied. Among these methods, the finite element method(FEM) and the analytic method are most popular in field engineers because of the accuracy of FEM and the convenience and rapid analysis time of the analytic method. Contrary, the finite element method has a weakness in calculation time and it is not easy to obtain the instantaneous characteristics value of motor with the analytic method. In this paper, the authors proposes a novel method for calculating the instantaneous characteristics of motors with the magnetic slot equivalent circuit.

• Bulletin of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.683-689
• /
• 2007

Let $\mathcal{B}$ be a certain Banach space consisting of analytic functions defined on a bounded domain G in the complex plane. Let ${\varphi}$ be an analytic polynomial or a rational function and let $M_{\varphi}$ denote the operator of multiplication by ${\varphi}$. Under certain condition on ${\varphi}$ and G, we characterize the commutant of $M_{\varphi}$ that is the set of all bounded operators T such that $TM_{\varphi}=M_{\varphi}T$. We show that $T=M_{\Psi}$, for some function ${\Psi}$ in $\mathcal{B}$.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1805-1818
• /
• 2015

In this article, we first consider a linear multiplier fractional q-differintegral operator and then use it to define new subclasses of p-valent analytic functions in the open unit disk U. An attempt has also been made to obtain two new q-integral operators and study their sufficient conditions on some classes of analytic functions. We also point out that the operators and classes presented here, being of general character, are easily reducible to yield many diverse new and known operators and function classes.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.5
• /
• pp.176-182
• /
• 1983

This paper derives a newly neveloped analytic optimal condition to minimize the operating cost of a generation system in the aspect of Power System Planning, When the system includes pumped-storage units. The analytic optimal condition is derived by defferentiating the analytic cost function, Which were obtained by assuming the load and generating as Gaussian random variables, with respect to the variations of pumping energy. The condition is resulted in very simple form and various optimization techniques can be used. The simulation results of a case study were compared with the results of the conventional methods to prove the usefulness of the algorithm.

• Management Science and Financial Engineering
• /
• v.16 no.1
• /
• pp.17-46
• /
• 2010

This paper studies six different AHP (Analytic Hierarchy Process) approaches and suggests that the features of the approaches are classified by application circumstances in order to contribute to the applicability and quality usage of the AHP. Our study investigates the hierarchical principles and characteristics of the AHP, and historical debates on the AHP evaluation in which the six approaches have been involved. One of six approaches is an ANP (Analytic Network Process) application that is directly connected to AHP usage. The application differences among the six approaches are validated with a plain example. Then, the four circumstances of AHP applications are classified by two dimensions: the first dimension is whether or not the importance (weights) of criteria is independent of restrictively setting alternatives, and the second dimension is whether or not preference (priorities) of alternatives is independent of adding alternative(s) to or removing alternative(s) from the considering set of alternatives. Then featuring way of weighting criteria is classified. We suggest the distinguishing manners and describe the implications of the AHP application. Finally, we discuss rank reversal and multiplicative AHP.