• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.253-262
• /
• 2013

The test on the mix of PVA fiber of low carbon inorganic composite as a cement substitute found it to be satisfactory in terms of flexibility and stiffness. The result of the evaluation of the properties of low carbon inorganic panel revealed that the absorptivity was low at 8 to 9%, which is lower than the KS value of 25%. Also, the test on non-combustibility and gas toxicity found that these factors satisfied the decision criteria. In the test on heavy metals discharges, Pb, Cd, Cr6+, Hg, and As were not detected. Regarding far-Infrared emissivity and formaldehyde emission, the substitute was found to be harmless to the human body. Therefore, if the issue of shrinkage, which is a disadvantage of inorganic composites, is addressed, it is judged that it is possible to develop a low carbon inorganic composite panel with better performance.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1599-1603
• /
• 2011

Novel chemosensors based on 2-(2'-hydroxyphenyl)quinoline were prepared and evaluated for sensing metal cations. The photophysical properties of chemosensors 1-3 were examined and their ion-selectivity was evaluated by measuring their fluorescent emission responses to alkali, alkaline earth, and transition metal ions. Chemosensors 1, 2 and 3 show ratiometric and enhanced fluorescence changes with transitional metals that are efficient fluorescence quenchers, especially 3 has a high binding constant with $Hg^{+2}$ in $CH_3CN$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2723-2725
• /
• 2014

Recently we have reported a novel class of anion receptors which are based on 2n-crown-n topology. Trioxane derivatives are capable of anion sensing through pure aliphatic C-H hydrogen bonding. In this work, we highlight another interesting property, i.e., they can also recognize cations as normal crown ethers (3n-crown-n topology). Since the same functional moiety can recognize anions and cations, these coronands are predicted to be amphi-ionophores. However, we could not detect cations even in the gas phase. Considering trioxane is analogous to [$1_6$]starand, this was rather counter-intuitive. The calculation results show that these coronands can detect alkali metals with very low affinity. The low affinity toward cations should be responsible for this failure of experimental detection. With careful theoretical study, we found that this low affinity toward cations could be explained by the unfavorable charge-dipolar moiety orientations as proposed by Cui et al. As in the case of [$1_6$]starand, this is an example that underscores the importance of charge-dipolar moiety orientation in supramolecular interactions.

• Journal of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.434-443
• /
• 1980

The purpose of this work was to separate Ce, Pr, Nd and Sm from rare-earth oxides by column chromatography. Rare earth solution were adsorbed into the Amberlite IR-120 resin and were eluted by the ammonia alkali solution of the EDTA. As a result of determinating rare earth metals of each fraction, Ce was separated very effectively and Nd and Sm partially separaed but Pr never separated.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.242-246
• /
• 2005

The heavy metal analysis (Cd, Pb, Cu, Cr, Zn, Ni) with various extraction methods was performed using the certified sample and real soil sample. In case of the certified samples, $10.5{\sim}118%$ of recovery was showed with various ranges depend on the metal kinds and extraction methods. Also, the alkali-digestion method was showed the proper results by applying in hexavalent chromium. In case of real sample, compared to amounts of heavy metals extracted using 0.1N-HCl, those extracted using acid digestion are higher by $3{\sim}24$ times in Cu, $1.1{\sim}1.5$ times in Cd, $2{\sim}23$ times in Pb, $3{\sim}104$ times in Zn, $12{\sim}101$ times in Ni, $30{\sim}202$ times in Cr. There is no considerable difference between four acid digestion methods.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.123-130
• /
• 2019

We investigated the electrochemical behavior of an electrode coated with a nickel hexacyanoferrate/graphene oxide (NiPB/GO) composite to evaluate its potential use for the electrochemical separation of radioactive Cs as a promising approach for reducing secondary Cs waste after decontamination. The NiPB/GO-modified electrode showed electrochemically switched ion exchange capability with excellent selectivity for Cs over other alkali metals. Furthermore, the repetitive ion insertion and desertion test for assessing the electrode stability showed that the electrochemical ion exchange capacity of the NiPB/GO-modified electrode increased further with potential cycling in 1 M of $NaNO_3$. In particular, this electrochemical treatment enhanced Cs uptake by nearly two times compared to that of NiPB/GO and still retained the ion selectivity of NiPB, suggesting that the electrochemically treated NiPB/GO composite shows promise for nuclear wastewater treatment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.255-266
• /
• 2021

Solid-state mechanochemical reduction combined with subsequent melting consolidation was suggested as a technical option for the oxide reduction in pyroprocessing. Ni ingot was produced from NiO as a starting material through this technique while Li metal was used as a reducing agent. To determine the technical feasibility of this approach for pyroprocessing, which handles spent nuclear fuels, thermodynamic calculations of the phase stabilities of various metal oxides of U and other fission elements were made when several alkaline and alkali-earth metals were used as reducing agents. This technique is expected to be beneficial, not only for oxide reduction but also for other unit processes involved in pyroprocessing.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2339-2358
• /
• 2022

The review discusses various alternative approaches for spent nuclear fuel (SNF) reprocessing in aqueous carbonate media. The main stages, schemes, and methods of the most well-known and well-described processes for reprocessing SNF and some high-level radioactive waste using carbonate systems developed by research groups in Japan, the United States of America, the Republic of Korea, and the Russian Federation described and compared. The main advantages of such methods are outlined compared to the SNF reprocessing in nitric acid media. The levels of development and proximity of the designed processes to the industrial implementation are shown. The main principle achievements, prospects, and routes for the refinement of such methods for the technology of SNF reprocessing and handling of high-level radioactive waste formulated.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.5-9
• /
• 2007

This study carried out to investigate the removal capacity of heavy metals such as Cu (II), Zn (II) and Cd (II) dissolved in aqueous solution in the soils collected from Hyeon-Dong (HD), San-seong (SS), Keum-chon (KC) and Keum-Hac (KH) located in the upper Banbyun stream. The pH of all the soils was weak alkali such as 8.8 9.2. According to the analysis of chemical composition of the soils, the amount of $SiO_2$, $AlO_2$ and CaO were similar in all tested soils. However, the amount of $K_2O$, $FeO_3$ and MgO were different from each soil. The XRD measurement with these soils showed that quartz and feldspar were presented in all tested soils, and the distribution of kaoline, illite, montmorillonite, vermiculite and calcite were different from each soil. The results of the removal capacity of heavy metals indicated that all the soils had more than 98% of the removal efficiency of Cu (II), Zn (II) and Cd (II), and among the heavy metals, Cu (II) was removed the most effectively. These results suggested that the soils collected from the upper Banbyun stream have the high removal capacity of heavy metals, and these soils could be used for the banking a river around the abandoned mine area, containing the higher concentrations of heavy metals than the usual stream.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.78-85
• /
• 2014

BACKGROUND: Recent studies using various industrial wastes for heavy metal stabilization in soil were conducted in order to find out new alternative amendments. The acid mine drainage sludge(AMDS) contains lots of metal oxides(hydroxides) that may be useful for heavy metal stabilization not only waste water treatment but also soil remediation. The aim of this study was to investigate the applicability of acid mine drainage sludge for heavy metals stabilization in soils METHODS AND RESULTS: Alkali soil contaminated with heavy metals was collected from the agricultural soils affected by the abandoned mine sites nearby. Three different amounts(1%, 3%, 5%) of AMDS were applied into control soil and contaminated soil. For determining the changes in the extractable heavy metals, $CaCl_2$ and Mehlich-3 were applied as chemical assessments for metal stabilization. For biological assessments, lettuce(Lactuca sativa L.) and chinese cabbage(Brassica rapa var. glabra) were cultivated and accumulation of heavy metals on each plant were determined. It was revealed that AMDS reduced heavy metal mobility and bioavailability in soil, which resulted in the decreases in the accumulation of As, Cd, Cu, Pb, and Zn in each plant. CONCLUSION: Though the high level of heavy metal concentrations in AMDS, any considerable increase in the heavy metal availability was not observed with control and contaminated soil. In conclusion, these results indicated that AMDS could be applied to heavy metal contaminated soil as an alternative amendments for reducing heavy metal mobility and bioavailability.