• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.632-639
• /
• 2022

The objective of this study is to analyze the productivity, efficiency, and factors affecting the productivity of a spray task from an international airport project. The study is focused on the productivity analysis of the Subcontractor whose job was to supply and apply sprayed-applied fire-resistive material (SFRM) on steel members to achieve the necessary fire ratings on the building structures of the Hamad International Airport, Qatar. The study analyzed the productivity of the four sprayer teams who completed the task at three locations and three areas of the airport. The study found that the productivity of the individual team observed during the SFRM spray task was not only different but was also observed different when they worked at varying floor heights where different factors affecting productivity were predominant. The study found that the efficiency was lowest (47.32%) when the spray team had to work at second-floor heights and factors affecting productivity such as limited accessibility for material movement and lifting, site congestion, lack of continuity of operation due to priority areas and frequent re-handling of machines and tools were present. Besides, the factors such as adverse weather conditions and sub-trades interference affected productivity at all locations. The findings show that productivity depends on multiple factors and those factors need to be identified and addressed to improve productivity. The findings also show that the estimated efficiency was hard to achieve but possible since Team 4 had 97% efficiency on the first floor of the airport.

• Journal of Information Technology Services
• /
• v.22 no.3
• /
• pp.85-100
• /
• 2023

The development of Airside Vehicle Control System(AVCS) at Gimpo Airport aims to reduce ground safety accidents in movement area and improve airport operation efficiency and safety management service quality. The vehicle is controlled by a brake controller RTK-antenna and On-Board Diagonostics(OBD) module. Location data is transmitted to a nearby communication base station through a Wi-Fi router and the base station is connected to the AVCS by an optical cable to transmit location data from each vehicle. The vehicle position is precisely corrected to display information using the system. The system allows airport operators to view registered information on aircraft and vehicles and monitor their locations speeds and directions in real time. When a vehicle approaches a dangerous area alarm warnings and remote brake control are possible to prevent accidents caused by carelessness of the driver in advance.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.526-535
• /
• 2012

Digital signage in airport is used to provide the flight and airport information to the airport passenger. However, the current digital signage displays one type of contents to all of the airport customers without considering the type of the customer. Thus, the digital signage suffer from the inefficiency problem resulting in lower customer satisfaction. This problem can be solved if we adopt a smart digital signage which can recognize the type of the customer and provide the tailored contents. In this study, we report a smart digital signage using age recognition. Our smart digital signage can recognize the age of the customer in real-time, and provide the tailored contents to the customer. The smart digital signage can improve the airport customer satisfaction and the airport work efficiency by providing the information that is needed by the airport customers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.720-725
• /
• 2016

This study examined how the APU noise of an aircraft influences the work efficiency and stress of airport ramp workers. A survey of airport ramp workers was conducted and the results analyzed. In the demographic analysis, men outnumbered women - accounting for 86% of the survey target - and 80% of the respondents were found to be employees with less than 15 years of work experience. The occupational cluster of the total of 160 respondents included 41 aircraft maintenance workers, 70 ground staff (Cargo, Water and Waste services), 19 ramp coordinators, 18 ramp controllers and 12 catering Service workers. The ground staff were the most prevalent, constituting 44% of the occupational cluster. Regarding the APU noise, 74% of the respondents answered that the environment was "always noisy", while 26% answered that it was "sometimes noisy". 85% answered that they are sensitive to and put under stress by the APU noise, while the majority of the respondents answered that the APU noise degrades their work efficiency. In conclusion, this study examined the effect of APU noise on the work efficiency and stress of airport ramp workers by analyzing the survey data by Regression and Chi-square analysis.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.536-544
• /
• 2012

Digital signage provides flight and airport information to the airport visitors and passengers. However, the digital signage has efficiency problem by displaying one type of advertisement to every customers regardless of their personality. We may solvel the inefficiency problem by using a smart digital signage which can recognize the characteristics of the customer We presents a smart digital signage with sex recognition function. The smart digital signage can recognize the sex of the customer to display the custom-made advertisement in realtime so that we can increase the satisfaction level of the airport passengers and visitors.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.75-82
• /
• 2009

Air transport markets are composed of airlines' networks through their base airports. The analysis of an air transport market has been focusing on determining the efficiency or competitiveness of airports or airlines in the market using number of routes, number of passengers, transfer rates, revenues, costs, and other data. However, little work has been done in analyzing the airport network itself. Assuming the air transport markets of Korea, China, and Japan are integrated, this paper aims to analyze the characteristics of the resulting airport network. To that end, the degree of connectivity, the degree of closeness, and the betweenness of centrality are employed. The analysis shows that Incheon International Airport is better than most other airports in terms of the degree of connectivity and that of closeness. Airports in Japan, however, exhibit strong connectivity but weak closeness and betweenness of centrality. Although it has low connectivity, Shenyang Airport has a possibility of becoming an attractive point of the integrated market in the future due to its high degree of closeness.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.335-347
• /
• 2022

Airport operations are well-known as a bottleneck in the air traffic system, putting growing pressure on the world's busiest airports to schedule arrivals and departures as efficiently as possible. Effective planning and control are essential for increasing airport efficiency and reducing aircraft delays. Many algorithms for controlling the arrival/departure queuing area are handled, considering it as first in first out queues, where any available aircraft can take off regardless of its relative sequence with other aircraft. In the suggested system, this problem was compared to the problem of scheduling n tasks (plane takeoffs and landings) on a multiple machine (runways). The proposed technique decreases delays (via efficient runway allocation or allowing aircraft to be expedited to reach a scheduled time) to enhance runway capacity and decrease delays. The aircraft scheduling problem entails arranging aircraft on available runways and scheduling their landings and departures while considering any operational constraints. The topic of this work is the scheduling of aircraft landings and takeoffs on multiple runways. Each aircraft's takeoff and landing schedules have time windows, as well as minimum separation intervals between landings and takeoffs. We present and evaluate a variety of comprehensive concepts and solutions for scheduling aircraft arrival and departure times, intending to reduce delays relative to scheduled times. When compared to First Come First Serve scheduling algorithm, the suggested strategy is usually successful in reducing the average waiting time and average tardiness while optimizing runway use.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.44-51
• /
• 2009

A bonded warehouse is the warehouse located in bonded area. It functions not only as a general warehouse but also as a place for managing the work related to import and export bonded goods. As a general warehouse, it uses the rack system to store the goods and the folk lift truck to move the unitized goods. The operation of the storing system closely related to the efficiency of space uses in a warehouse and vehicle working. Thus, vehicle performance measured in distance units in the ware-house could be used as one of the key performance measure in warehouse system. This paper focuses on the operation efficiency of the bonded warehouse which uses rack system for the storing and the folk lift truck for moving goods. The method of load allocation for balancing the rack uses and vehicle operation for maximizing efficiency are the specific concerns in this paper. The simulation study is conducted to find a policy for efficient vehicle operation based on balanced rack utilization, and the favorable result for the system operation would lead the usable proposal in vehicle operation.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.89-98
• /
• 2005

The privatization and commercialization of airports has moved forward at the globa1 level. individual countries have begun to focus less on the public welfare aspect of airports, and to emphasize the need to uncover means of increasing their respective airports economic performance and profitability. Although there is a need for Korean airports to be managed in accordance with this global trend. In order to conduct an accurate comparison and analysis of the managerial performances of the fourteen airports, the WLU(Work Load Unit) a concept which integrates the two outputs of airports, namely, passengers and freight, was employed in this study. Furthermore, in order to overcome the limitations of conducting a financial comparison based solely on WLU, the DEA model was also employed to evaluate airport efficiency: moreover, the benchmarking method was used to establish the input-output goals.

• Journal of Distribution Science
• /
• v.15 no.5
• /
• pp.65-73
• /
• 2017

Purpose - The Service Level Agreement which has been used in the IT information communication industry to maintain the level of service supplied by a vendor has been adopted in the service industry surrounding the airliners and airports. Considering that service quality is dependent on attitude of employees who are responsible to provide service, it is very important to understand what kinds of effects SLA(service level agreement) has on the attitude when SLA is applied to the service industry. SLA is an agreement between management authority and service providing contractor to make sure that certain level of service quality should be provided. For employees whose responsibilities are providing the service, SLA has both positive effects and negative effects. Negative side is that employees have to follow many irrigating complicated rules. On the other hand, the attribute of rules is that once one is become accustomed to them one may feel comfortable doing repeated same kinds of works, which is positive side for the workers. Research design, data, and methodology - We analyzed whether the SLA has moderating effects while service providers' job environment of outsourcing companies affects job satisfaction. Especially in the service industry, job satisfaction has great effects on productivity and efficiency. Results - The study results show the following. First, SLA has moderating effects while task performance environment affects treatment satisfaction. Second, SLA has moderating effects while task motivation environment affects treatment satisfaction. Third, SLA has moderating effects while physical work environment satisfaction affects treatment satisfaction. Fourth, on the other hand, the difficulties caused by SLA have moderating effects while the relationship among employees affects job dissatisfaction, which is negative side of SLA. From these results, we can tell that SLA has more positive moderating effects on treatment satisfaction on the whole. which results can be used to justify applying SLA to the service industry. Conclusions - In this study we analyzed the effects of SLA which have become more important in service industry nowadays on service providing employees. For managing side, the positive effects of SLA have to be emphasized while the negative effects should be avoided or minimized.