• 한국환경보건학회지
• /
• 제48권6호
• /
• pp.298-305
• /
• 2022

Background: The concentration of air pollutants as measured by the Air Quality Monitoring System (AQMS) is not an accurate population exposure level since actual human activities and temporal and spatial variability need to be considered. Therefore, to increase the accuracy of exposure assessment, the population should be considered. However, it is difficult to obtain population data due to limitations such as personal information. Objectives: The existing population defined in this study is the number of people in each region's grid. The purpose is to provide a methodology for evaluating exposure to PM_2.5 through existing population data provided by the National Geographic Information Institute. Methods: The selected study period was from October 26 to October 28, 2021. Using PM_2.5 concentration data measured at the Sensor-based Air Monitoring Station (SAMS) installed in Guro-gu and Wonju-si, the concentration for each grid was estimated by applying inverse distance weights through QGIS version 3.22. Considering the existing population, population-weighted average concentration (PWAC) was calculated and the exposure level of the population was compared by region. Results: The outdoor PM_2.5 concentration as measured through the SAMS was high in Wonju-si on all three days. Wonju-si showed an average 22% higher PWAC than Guro-gu. As a result of comparing the PWAC and outdoor PM_2.5 concentration by region, the PWAC in Guro-gu was 1~2% higher than the observed value, but it was almost the same. Conversely, observations of Wonju-si were 10.1%, 11.3%, and 8.2% higher than PWAC. Conclusions: It is expected that the Geographic Information System (GIS) method and the existing population will be used to evaluate the exposure level of a population with a narrow activity radius in further research. In addition, based on this study, it is judged that research on exposure to environmental pollutants and risk assessment methods should be expanded.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.430-437
• /
• 2008

Optical diffuse reflectance sensing in visible and near-infrared wavelength ranges is one approach to rapidly quantify soil properties for site-specific management. The objectives of this study were to investigate effects of preprocessing of reflectance data and determine the accuracy of the reflectance approach for estimating physical and chemical properties of selected Missouri and Illinois, USA surface soils encompassing a wide range of soil types and textures. Diffuse reflectance spectra of air-dried, sieved samples were obtained in the laboratory. Calibrations relating spectra to soil properties determined by standard methods were developed using partial least squares (PLS) regression. The best data preprocessing, consisting of absorbance transformation and mean centering, reduced estimation errors by up to 20% compared to raw reflectance data. Good estimates ($R^2=0.83$ to 0.92) were obtained using spectral data for soil texture fractions, organic matter, and CEC. Estimates of pH, P, and K were not good ($R^2$ < 0.7), and other approaches to estimating these soil chemical properties should be investigated. Overall, the ability of diffuse reflectance spectroscopy to accurately estimate multiple soil properties across a wide range of soils makes it a good candidate technology for providing at least a portion of the data needed in site-specific management of agriculture.

• 한국환경보건학회지
• /
• 제46권5호
• /
• pp.504-512
• /
• 2020

Objective: The purpose of this study was to evaluate the indoor to outdoor ratio (I/O ratio) of time activity patterns affecting PM_2.5 concentrations in homes in Korea through a simulation. Methods: The time activity patterns of homemakers were analyzed based on the 'Time-Use Survey' data of the National Statistical Office in 2014. From September 30 to October 2, 2019, the experimenter lived in multifamily housing located in Guro-gu, Seoul. The I/O ratio of PM_2.5 concentration was measured by installing sensor-based instruments. Results: The average indoor and outdoor PM_2.5 concentrations during the three days were 33.1±48.9 and 45.9±25.3 ㎍/㎥, respectively. The average I/O ratio was 0.75±0.60. The indoor concentration tended to increase when PM_2.5 source activity such cooking and cleaning was present and outdoor PM_2.5 was supplied through ventilation. Conclusions: This study could be used as basic data for estimating indoor PM_2.5 concentrations with personal activity pattern and weather conditions using outdoor concentrations.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1470-1475
• /
• 2009

Until now for the safety of structures and equipment monitoring technology to measure the amount of the physical, if that is the one, one-point or single-source target is one the most. Therefore, becoming more numerous and complex to measure the amount of physical measurement technology that is comprehensive and complex, multi-source concepts to the monitoring of a multi-sensing technology is required. Have the same characteristics of multi-source multi-use space such as a multi-structure of facilities/equipment is. The people's safety in a multi-use facility will be directly related to life and even a little carelessness can lead to large-scale disaster occurs because of several factors, risks and to manage detect in advance the development of an intelligent monitoring technology is essential. Therefore, this study shows that multiple structures/facilities to improve the quality of human life in research to maintain a safe and comfortable living space for multi-source intelligence to the development of monitoring technology to achieve that goal, and the ubiquitous sensor network system on the basis of the wireless transmission module, and multiple research facilities/equipment for the ultra-small sensors for health monitoring study was performed.

• 센서학회지
• /
• 제19권2호
• /
• pp.155-159
• /
• 2010

0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ lead free piezoelectric ceramics were synthesized to enhance the piezoelectric properties of (Na,K)$NbO_3$. The systhesis and sintering method were the conventional solid state reaction method and general sintering method in air atmosphere. The polymorphic phase transition(PPT) was observed at all composition(0 $\leq$ x $\leq$ 0.05) when $(Ba_{(1-x)}Sr_x)TiO_3$ were added in the $(Na_{0.5}K_{0.5})NbO_3$. As Sr concentration was increased, grain size, dielectric loss(tan$\delta$) and mechanical quality factor($Q_m$) were decreased and piezoelectric constant($d_{33}$) and electromechanical coupling factor($k_p$) were increased within a limited value. The optimized piezoelectric and properties, $d_{33}$, $k_p$, $Q_m$, and tand, of 0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ were 139 pC/N, 0.31 %, 95, 0.04 at the composition of x=0.04.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.33-39
• /
• 2011

An optical sensing approach based on diffuse reflectance has shown potential for rapid and reliable on-site estimation of soil properties. Important sensing ranges and the resulting regression models useful for soil property estimation have been reported. In this study, a similar approach was applied to investigate the potential of reflectance sensing in estimating soil properties for Korean paddy fields. Soil cores up to a 65-cm depth were collected from 42 paddy fields representing 14 distinct soil series that account for 74% of the total Korean paddy field area. These were analyzed in the laboratory for several important physical and chemical properties. Using air-dried, sieved soil samples, reflectance data were obtained from 350 to 2500 nm on a 3 nm sampling interval with a laboratory spectrometer. Calibrations were developed using partial least squares (PLS) regression, and wavelength bands important for estimating the measured soil properties were identified. PLS regression provided good estimations of Mg ($R^2$ = 0.80), Ca ($R^2$ = 0.77), and total C ($R^2$ = 0.92); fair estimations of pH, EC, $P_2O_5$, K, Na, sand, silt, and clay ($R^2$ = 0.59 to 0.72); and poor estimation of total N. Many wavelengths selected for estimation of the soil properties were identical or similar for multiple soil properties. More important wavelengths were selected in the visible-short NIR range (350-1000 nm) and the long NIR range (1800-2500 nm) than in the intermediate NIR range (1000-1800 nm). These results will be useful for design and application of in-situ close range sensors for paddy field soil properties.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.802-806
• /
• 2004

For the protection of the local air quality and the global atmosphere, the emissions of trace species including nitric oxides (NO and NO$_2$) from gas turbines are regulated by local governments and by the International Civil Aviation Organization. In-situ measurements of such species are needed not only for the development of advanced low-emission combustion concepts but also for providing emissions data required for the sound assessment of the effects of the emissions on environment. We have been developing a laser absorption system that has a capability of simultaneous determination of NO and NO$_2$concentrations in the exhaust jets from aero gas turbines. A diode laser operating near 1.8 micrometer is used for the detection of NO while a separated visible tunable diode laser operating near 676 nanometers is used for NO$_2$. The sensitivities at elevated temperature conditions were determined for simulated gas mixtures heated up to 500K in a heated cell of a straight 0.5 m optical path. Sensitivity limits estimated as were 30 ppmv-m and 3.7 ppmv-m for NO and NO$_2$, respectively, at a typical exhaust gas temperature of 800K. Experiments using the simulated exhaust flows have proven that $CO_2$ and $H_2O$ vapor - both major combustion products - do not show any interference in the NO or NO$_2$ measurements. The measurement system has been applied to the NO/NO$_2$ measurements in NO and NO$_2$ doped real combustion gas jets issuing from a rectangular nozzle having 0.4 m optical path. The lower detection limits of the system were considerably decreased by using a multipass optical cell. A pair of off-axis parabola mirrors successfully suppressed the beam steering in the combustion gas jets by centralizing the fluctuating beam in sensor area of the detectors.

• 한국동물학회지
• /
• 제38권3호
• /
• pp.417-425
• /
• 1995

적외선 온도 감응기를 장착한 기존의 마이크로파 고정기의 단점을 보완하기 위해서 주변 온도를 보상할 수 있는 고정기를 개발하였다. 이를 이용하여 흰쥐의 혀, 췌장 및 소장을 고정(물리고정)한 후 몇 가지 염색법을 적용하여 염색성을 관찰하였고, 췌장의 내, 외분비 세포의 미세구조를 전자현미경으로 검경하였으며 단백질의 양과 bands의 양상을 조사하였다. 또한 이 결과들을 통상적인 화학고정을 시행한 경우와 비교하여 마이크로파에 의한 생체물질의 고정효과를 검증하고 조직화학에 응용될 수 있는지를 조사하였다. 흰쥐 혀의 횡단면을 H-E 염색하였을 경우, 두 고정법에서 염색성은 유사하였으나 물리고정에 비해 화학고정에 의한 관찰된 조직은 근육층의 분리가 관찰되었다. 췌장조직을 Feulgen 반응을 이용하여 염색하였을 경우, 물리고정한 군에서 반응산물이 보다 명확하게 관찰되었으며, 십이지장 융모에서 PAS 반응에 의한 염색성도 물리고정의 경우에서 배상세포에 특이적으로 강하게 나타났다. 물리고정을 한 후 짧은 시간동안 2차로 화학고정했을 경우, 췌장 내, 외 분비세포들의 전자현미경적 미세구조는 막 구조 및 세포기관이나 분비과립등의 보존상태 등에서 통상적인 화학고정법의 결과와 유사하게 관찰되었다. 물리고정한 시료의 질과 염색성이 우수하다는 사실에 근거하여 단백질 함량을 조사한 결과, 물리고정시 단백질의 추출이 비교적 적은 것으로 조사되었다. 이상과 같은 결과들은 마이크로파로 생체조직을 고정할 경우 대부분의 단백질들의 불용성화가 일어남으로써 미세구조의 고정 및 염색성이 증대되는 것으로 판단되었다. 현상에는 반드시 rosy transformant의 염색체 삽입에 의해서 만이 아니라 세포질내에서도 construct내의 rosy 유전자의 발현이 가능한 것으로 분석되었다. 또한 형질전환율에 있어서는 Pc[(ry+)B]와p[(ry+)$\Delta$SX9] construct 간에 유의한 차가 없는 것으로 나타났다. 이상의 결과로 볼 때, 실험 목적에 따라 자율적인 P element 또는 helper DNA를 이용한 비자율적인 P element를 효과적인 vector 로 선택 이용함으로써 특정 유전자를 곤충집단내로 침투 및 고정시킬 수 있다고 판단된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.329-331
• /
• 2018

본 논문은 나사 가공을 위한 원재료 공급부터 시작해서 선반 머신으로 가공되어 제품의 불량 여부에 대한 검수를 스마트팩토리 기술이 도입된 로봇이 자동으로 조립 및 분해 작업을 통해 검수를 해주는 모니터링 시스템에 대해 제안하였다. 생산 지시 수량과 생산 지시에 따른 완료 체크는 변위센서로 원재료 입고 여부에 따른 생산 현황을 체크하였고 가공된 Female, male 의 피치, 외형 검사를 진행하여 OK, NG 판별을 한다. 로봇시스템에서는 원자재 적재, 반출, 파레트 이송 및 전반적인 공정에 개입하며, 유기적으로 구동될 수 있도록 중계역할을 하였고 나사 가공품에 대한 위치 정보는 비접촉 무선 태그를 활용하여 위치 정보를 수집하였고 Energy Saving System으로 장비 생산 효율성 및 가동율에 대해 체크하였다. 환경센서는 공조환경 데이터(온도, 습도)를 수집하여 정확한 온도 및 습도 측정 하여, 제품 가공 품질 영향 체크 제품의 구동 위험 수준 환경(과열, 다습)에 대해 관리 감시하였고 CNC 및 로봇모듈에 대한 제어는 PLC로 하여 이기종 시스템 통합 운영하였다.

• 한국대기환경학회지
• /
• 제30권4호
• /
• pp.327-338
• /
• 2014

The objective of this study is to enhance the effectiveness of Korean Inspection and Maintenance (I/M) program. Three main tasks are: to measure pollutant emissions of in-use light-duty diesel vehicles (LDVs); to evaluate the validity of existing smoke control scheme for low-smoke-emitting vehicles, which have diesel particulate filters, DPF, to meet stringent Euro-5 emission limits; and to assess the necessity and the benefit of $NO_x$ inspection, which is not involved in current I/M program. We measured second-by-second smoke, particulate and gaseous emissions of 27 LDVs using opacity smoke meter, photo-acoustic soot sensor, and portable emissions measurement system, respectively, under the Korean I/M test driving cycle, KD-147. We find that the DPF plays a key role in controlling soot, which can be considered as black carbon contained in particulate matter. Thus, from an I/M perspective, we believe smoke inspection strategies for Euro-5 diesel vehicles should be more focused on the capability of detecting DPF malfunctions or failures, in order to keep DPF properly functional. Fleet averaged distance-specific $NO_x$ emissions are consistently higher than corresponding emission limits, and the values are similar among pre-Euro-3, Euro-3, and Euro-4 vehicle fleets. These findings indicate that the $NO_x$ inspection should be incorporated into current I/M program in order to manage urban $NO_x$ emissions. This research allows the Korean I/M program keep pace with developments in vehicle technologies, as well as the increased emphasis on $NO_x$ with respect to air quality and human health.