• 한국조리학회지
• /
• 제22권8호
• /
• pp.149-156
• /
• 2016

본 연구의 목적은 조리과정에서 발생한 총휘발성 유기화합물질, 미세먼지, 악취, 총부유세균 등의 오염물질들이 조리실내로 분산되어 실내공간이나 조리업 종사자에게는 나쁜 냄새나 작업환경 및 건강피해를 감소하고자 하는 것이다. 이를 위해 기존 공기청정기의 단점을 보완하고, 반영구적이며, 각종 오염물질을 효율적으로 제거하기 위하여 활성탄과 황토를 결합한 바이오세라믹 필터를 bar type으로 제작한 실내용 소형 공기청정기 개발에 중점을 두었다. 측정항목은 총휘발성 유기화합물, 미세먼지, 복합악취, 총부유세균 등 모두 4가지 항목으로 개발된 공기청정기 가동 전과 일정시간 가동 후를 비교하여 측정하였다. 측정결과, 총휘발성 유기화합물의 농도는 평균 $2,500{\mu}g/m^3$에서 $223{\mu}g/m^3$으로 약 91.02%의 높은 제거효율을 보였으며, 미세먼지의 제거율은 평균 농도가 $26.68{\mu}g/m^3$로서 97.51%의 우수한 제거효과가 나타났으며, 복합악취의 희석배수를 측정한 결과 평균 144로 평균 95.20% 감소하였다. 또 총부유세균은 초기 농도가 $787{\sim}814CFU/m^3$에서 $47{\sim}40CFU/m^3$로 약 94% 이상 제거되는 것을 확인하였다. 결론적으로 개발되어진 공기청정기의 바이오세라믹 필터는 오염물질을 제거하는데 우수한 제거효과를 나타냈다. 따라서 공기청정기를 조리실내에서 환기장치와 렌지후드를 병행하여 사용하면 기존의 열악한 조리실 내의 환경이 크게 개선되어질 것으로 사료된다.

• 융합신호처리학회논문지
• /
• 제19권4호
• /
• pp.167-173
• /
• 2018

빛이 부족하고 공기 순환이 원활하지 않은 실내에서 식물의 지상부와 지하부를 활용한 공기 정화 시스템을 제안한다. 제안된 시스템은 식물의 공기정화 효과를 극대화하고자 지상부는 청색과 녹색의 LED를 조합한 혼합광과 자연광에 가까운 고연색 LED를 각각 조사하고 지하부의 토양을 필터로 활용하고자 팬을 이용하여 강제 순환하였다. 광원과 팬이 결합된 실내공기정화 시스템이 식물만 배치된 경우보다 오염된 공기를 단시간에 가장 많이 제거하였다. 실내 공기정화 시스템의 혼합광과 고연색광 두 가지의 경우에서 식물만 배치된 경우보다 미세먼지는 각각 14%, 14.2%, TVOC는 7.5%, 9.4% 로 더 크게 감소하였다. 팬을 15분 동안만 가동한 실험에서도 TVOC가 97.8%로 크게 감소하였다. 식물의 광합성과 토양을 필터로 활용하는 것이 오염된 공기를 짧은 시간에 정화시킬 수 있었고 팬의 일시적인 가동으로도 지속적인 가동의 효과를 얻었다.

• 한국농촌건축학회논문집
• /
• 제23권4호
• /
• pp.38-45
• /
• 2021

In this study, air quality conditions were identified and analyzed in real time, at the same time, living habits and ventilation methods were maintained in the daily life of residents, and thus, this present study focuses on the lifestyles of residents. Previous studies showed a difference from this study, focusing on the study on the effects of changes in indoor air quality on human health according to the indoor air quality process test standards of the Ministry of Environment. Formaldehyde concentrations exceeded all ventilation standards, but satisfied the organic standards of the Ministry of Environment when ventilation devices and air purifiers were activated. As such, it was investigated that a large amount of formaldehyde emission in the condo is initially ventilated, but a certain concentration is maintained. The change in PM2.5 concentration according to the ventilation method showed a clear difference. As a result of simulating indoor air flow during natural ventilation, the effects of wind speed and wind direction affect the flow rate of indoor air, and indoor polluted air is stagnant even in the presence of wind and is not completely discharged. When the risk assessment results are averaged on the day of measurement, the trends of change between adults and children are almost equivalent, but the results address that children are more sensitive to risk than adults.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.217-218
• /
• 2021

With the prolonged Covid-19 epidemic, movement restrictions such as social distancing are prolonged, and as people stay indoors for a longer time, interest in indoor air pollution is increasing. Indoor air quality is not easily purified unlike outdoors. Among indoor building materials, paints and flooring contain formaldehyde that causes sick house syndrome and VOCs that contain carcinogenicity and harmfulness. For modern people who spend a lot of time living indoors for more than an hour, the occurrence of these harmful substances can be said to be fatal. In response to these risks, in July 2019, the government reinforced the standards for indoor air quality to protect the public's health by raising the detection standards for fine dust, ultrafine dust, and formaldehyde in indoor multi-use facilities. People use machines such as air purifiers to improve indoor air quality, or make efforts such as periodic ventilation. In order to reduce or support these other ancillary efforts more effectively, to reduce the generation of pollutants in the building itself, or to adsorb or purify pollutants in the air, use carbon black as an admixture to make a cement hardened body, and to grasp basic physical properties and adsorption capacity. And the result is as follows. As a result of the experiment to determine the appropriate amount of carbon black, it was confirmed that the more the amount of carbon black was added, the better it was in the formaldehyde emission test, but the tendency was not clear when measuring the flexural strength, so a further experiment to improve this is needed.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.45-49
• /
• 2015

Process gases with vapor or liquid phase as well as gas phase may experience alteration in itself or be contaminated in the fluid pipe to the process chamber. And thus it result in as particles or defects on the substrates in semiconductor, LCD, LED manufacturing. Purifiers and filters are used for control of contamination. However, none of detection device is available in the delivery line. In this paper, we propose simple device with lighting and sensing in order to predict contamination of the fluid or the tube wall. For some general purpose gases, it showed constant voltage output regardless of the flow rates. But, the smoke and the moisture in the air lowered the figure due to its concentration. Numerical values for several solid and liquid media were obtained. And, the operating temperature tendency was investigated.

• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.10-17
• /
• 2004

Comprehensive investigation according to the two kinds of blades is systematically carried out for a design of the centrifugal blower. The motivation of this work is due to demand of enhanced flow rate with higher inlet pressure, such as air purifiers adopting several filters. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger outlet velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the blower system shows detail information between the blades and inside the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with the two different blades.

• 대한의사협회지
• /
• 제61권12호
• /
• pp.749-755
• /
• 2018

Particulate matter is an air pollutant emitted from both natural and anthropogenic sources, and its adverse health effects have been well documented in time-series analyses and cohort studies. The effect size of particulate matter exposure-a roughly 0.5% increase in mortality for each $10{\mu}g/m^3$ increment of short-term exposure to particulate matter with aerodynamic diameter ${\leq}10{\mu}m$ and approximately a 10% increase for each $10{\mu}g/m^3$ increment of long-term exposure to particulate matter with aerodynamic diameter ${\leq}2.5{\mu}m$-is small compared to other risk factors, but the exposure is involuntary and affects the entire population, which makes particulate matter pollution an important public health issue. The World Health Organization and Korean government have both established guidelines for particulate matter concentrations, but the Korean guideline is less stringent than that of the World Health Organization. The annual mean concentration of particulate matter in Korea is decreasing, but the trend seems to be slowing. In addition to policy efforts to reduce particulate matter emission, personal approaches such as the use of face masks and air purifiers have been recommended. Personal approaches may not solve the fundamental problem, but can provide temporary mitigation until efforts to reduce emission make progress.

• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.79-86
• /
• 2022

Many commercial air purifiers currently have deployed granular activated carbon (GAC) filters for removing volatile organic compounds in the indoor air. GACs are generally used to remove gaseous contaminants in the air through adsorption by the inner surfaces of pores. In addition, airborne particles can be also filtered by the surface adsorption of the GACs, which can improve the life-time of the particulate filters. In this study, the filtration efficiency of GACs to ultrafine particles through surface adsorption was investigated at different volume flow rates by deploying a continuous particle filtration system. The polydisperse sodium chloride (NaCl) particles were generated by a set of an atomizer and a diffusion dryer, and then mixed with particle-free air at different volume flow rates. The penetration of ultrafine particles and pressure drop for each experimental condition were measured to figure out the effect of the volume flow rate on the surface adsoprtion of the GACs to particles, ~ 2 mm. The particle filtration efficiency of the GACs decreased as the volume flow rate increased from 4 to 14 lpm. However, the 5 times thicker GAC filter layer decreased the penetration of ultraparticles than a preious study. The filtration efficiency of the single granule was also higher than the previous result in the literature with smaller granule filter materials.

• 한국입자에어로졸학회지
• /
• 제18권4호
• /
• pp.87-95
• /
• 2022

Currently, droplet protective screens (DPSs) are used to prevent the spread of respiratory diseases. As virus particles can maintain their infective in indoor environments, recent studies have investigated the risk of airborne transmission. However, the ability of DPSs to block airborne transmission has not been verified yet. In this study, the preventive ability of DPSs against droplet and airborne transmission was evaluated. Moreover, the effectiveness of a Portable air purifier (PAP) was investigated. According to results, in a simulated room where an infectious person spoke, the DPS blocked more than 90% of the micron-sized droplets (with a diameter larger than 1 ㎛) transmitted to the front of the infectious person. However, sub-micron droplets (with a diameter smaller than 1 ㎛) passed through the DPS and spread in a room. However, the PAP reduced the amount of both micron and sub-micron droplets transmitted to the front of the infectious person. When the PAP airflow direction was set from the DPS surface to the free space near the infectious person, improved prevention against droplet and airborne transmission was recorded. However, airborne transmission was accelerated when the PAP airflow direction was set from the free space to the DPS surface.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.143-149
• /
• 2019

To develop flexible adsorbents for compact volatile organic compound (VOC) air purifiers, flexible as-spun zeolite fibers are prepared by an electrospinning method, and then zeolite particles are exposed as active sites for VOC (toluene) adsorption on the surface of the fibers by a thermal surface partial etching process. The breakthrough curves for the adsorption and temperature programmed desorption (TPD) curves of toluene over the flexible zeolite fibers is investigated as a function of the thermal etching temperature by gas chromatography (GC), and the adsorption/desorption characteristics improves with an increase in the thermal surface etching temperature. The effect of acidity on the flexible zeolite fibers for the removal of toluene is investigated as a function of the $SiO_2/Al_2O_3$ ratios of zeolites. The acidity of the flexible zeolite fibers with different $SiO_2/Al_2O_3$ ratios is measured by ammonia-temperature-programmed desorption ($NH_3-TPD$), and the adsorption/desorption characteristics are investigated by GC. The results of the toluene adsorption/desorption experiments confirm that a higher $SiO_2/Al_2O_3$ ratio of the flexible zeolite fibers creates a better toluene adsorption/desorption performance.