• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2021

Purpose Plasma renin activity (PRA) test is important for the diagnosis of primary aldosteronism. PRA is an easily deformed substance in vitro and affected by temperature changes. Laboratory of ASAN medical center has consistently found that there was a difference between the initial and re-experimental results. We compared and analyzed the differences in PRA test results according to the sample storage status. Materials and Methods The measurement of PRA was performed by using the radioimmunoassay. From August to September 2020, 43 PRA re-test samples were tested with different sample storage condition. The first group was re-examined by freezing the plasma-separated samples at -18℃, and the second group was re-examined with refrigerated EDTA sample. Also, additional tests were conducted on 13 PRA samples to verify the effect on thawing temperature differences in plasma-separated samples. The same samples were divided into two parts and stored frozen at -18℃, respectively, and thawing samples in room temperature and those in refrigerator were were conducted. Each result was compared and analyzed based on the initial experimental results. Results The results of re-examination after frozen storing plasma separation samples showed a lower correlation than the results of re-examination with EDTA plasma samples in refrigerator. When calculating the percentage based on the initial test results, the average percentage of each was 404.9% and 133.8%. The correlation coefficient was also R=0.8501 and R=0.9966, respectively, showing a higher correlation between plasma in the refrigerated sample EDTA tube. In comparison experiments with differences in thawing temperature, average percentage of the results of initial test and room temperature thawing was 94.3% and the average percentage of the results of refrigerated thawing was 88.0%. After again freezing the sample, the average percentage of the second room temperature thawing result is 107.5%, and the second refrigerated thawing group is 112.7%. Both groups showed an increase from first thawing. Conclusion A comparative analysis of retesting according to differences in sample storage methods in PRA tests showed a higher correlation between the results of retesting of the refrigerated EDTA plasma. And repeated freezing and melting of plasma separation samples, regardless of temperature during defrosting, has been shown to affect results. Therefore, retest of PRA should re-collect plasma from original EDTA plasma to increase reproducibility.

• Conservation Science in Museum
• /
• v.24
• /
• pp.1-16
• /
• 2020

This paper presents the process of re-conservation and the results of research on the production method of the Iron Sword with Ring Pommel with Three-Pointed Leaf Decoration, one of the excavation findings from Tomb No. 55 in the Dalseong Ancient Tomb Complex in Daegu. This iron sword is a double weapon with two large swords housed within a single sheath. Four smaller swords are attached to the surface of the sheath, two on the upper portion and the other two below. It is the only such two-in-one weapon excavated intact thus far from an ancient Korean tomb. The records show that it underwent conservation treatment twice in the past. In this study, it was subjected to conservation treatment again to replace the stiffener in some cracking areas, and its material, composition, and production method were analyzed by CT, XRF analysis, and stereoscopic microscopy. The sword is mainly made of copper, but the golden component contains both gold and mercury, which suggests that the copper was plated in gold using mercury amalgamation. The examination of the production methods indicates that it was intended more to demonstrate the authority of its owner rather than to serve any practical use. The two upper small swords on the sheath were made in the same manner as the main swords, and the two small lower swords were cut from a single metal sheet. The sheath was made by cutting two metal sheets. Supports were used to attach the two small swords to the upper portion of the sheath, while the lower portion of the sheath was slit to allow the other two small swords to be inserted into it. The ring pommels of the main swords have a three-pointed leaf decoration. As for the other designs, the handle of the main sword features a series of semicircles, the decorative bands on the sheath have waves in dots, and the fish tail of the sheath shows diagonal lines of dots.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.493-503
• /
• 2021

The study was designed to analyze raw and auxiliary materials of Korean traditional cookies such as Yugwa and Gangjeong, equipment and tools, personal hygiene of workers and microbial contamination of materials by each manufacturing process. In addition, it looked at washing method for reducing microorganisms at the site and reduction effect of microorganisms by frequency in the manufacturing processes of Yugwa. In the process of producing Korean traditional cookies, the level of total aerobic bacteria (TAB) in popped rice was 1.2 Log CFU/g and the level of TAB in finished products increased to 3.7 Log CFU/g. In the process of producing Yugwa, the level of TAB increased to a maximum of 6.5 Log CFU/g in the soaking process but decreased to 1.3 Log CFU/g in the frying process. However, the level of TAB increased again to 1.3 Log CFU/g in finished products that proves its recontamination. It is estimated that he manufacturing process causes cross-contamination that comes from the work tools, equipment or workers. In particular, the spatula, one of the work tools, was found to have 4.4 Log CFU/g of aerobic bacteria and 4.2 Log CFU/g of colon bacillus that show they are highly contaminated. In the soaking process of Yugwa that lasts seven days, the level of TAB was a maximum of 10 Log CFU/g and the level of total colon bacillus was 6.8 Log CFU/g. When compared with washing methods, using hands and tools or running water, it is confirmed that the level of both TAB and total colon bacillus decreased to 5.0 Log CFU/g and 2.8 Log CFU/g respectively when hands were washed with running water 10 times. The above result shows that it's required for workers to wash their hands as well as wash and disinfect work tools and equipment in the process of producing Korean traditional cookies at small-scale companies. In addition, to reduce the level of microbial contamination in finished products, workers are required to apply their reduction method at the site.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.69-97
• /
• 2021

'Déconstruction' is a system of thought that induces the emergent property that characterizes contemporary philosophy. The tradition of ancient Greek philosophy evolved over and over again, giving rise to the Renaissance and Enlightenment. It seemed to have reached its end under the historical perspective of modernity. However, contemporary philosophy wanted to see more possibilities through the deconstruction of modern philosophy. If modern philosophy dreams of a strange cohabitation between God and man with the humanistic completion of Plato's philosophy, modern philosophy rejects even that through deconstruction. Although Plato's classical metaphysics is a stable system centered around the absolute, it is ultimately based on God and religion. Under that system, human autonomy is only the autonomy bestowed by God. Contemporary philosophy is one of the results of efforts that try to begin philosophy from the original human voice through deconstruction. Instead of epistemology dependent on metaphysics, they wanted to establish epistemology from human existence and realize the best good that would set humans free through deconstruction. As such, it is no mistake to say that deconstruction is also an extension of the modern topic of human freedom. Deconstruction and human freedom act as one body in that the two cannot be separated from each other. Oddly enough, Daesoon Thought, which seems to have religious faith and traditional conservatism as main characteristics, has an emergent property that encompasses modern and contemporary times. The period of Korea, when Kang Jeungsan was active and founded Daesoon Thought, has an important meaning for those who have a keen view of history. Such individuals likely think that they have found a valuable treasure. This is because that period was a time when ideological activities were conducted due to an intense desire to discover the meaning of human freedom and envision a new world without copying the ways of the West. Instead they looked to face internal problems and raise people's awareness through subjectivity. In other words, the subtle ideas created by Korea's self-sustaining liberalism often take the form of what is commonly called new religions in modern times. Among these new religions, Daesoon Thought, as a Chamdonghak (true Eastern Learning), aims to spread a particular modern value beyond modern times through the concept of Haewon (the resolution of grievances) that was proclaimed by Jeungsan. The Haewon espoused in Daesoon Thought is in line with the disbandment of modern philosophy in that it contains modernity beyond modern times. First, Haewon means to resolve the fundamental resentment of human existence, which arose from Danju's grievance. Secondly, Haewon in Daesoon Thought encompasses the Haewon of the Three Realms of Heaven, Earth, and Humanity centers on a Haewon-esque style of existence called Injon (Human Nobility). Haewon in Daesoon Thought can be understood in the same context as Derrida's philosophy of Deconstruction. Modern deconstruction attempts to expose the invisible structures and bonds within human society and attempt to destroy them. In a similar way, Haewon endeavors to resolve the conflicts among the Three Realms by releasing the bonds of fundamental oppression that hinder the Three Realms of Heaven, Earth, and Humanity.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.252-271
• /
• 2022

This article examines the characteristics of the royal tombs of the late Silla Dynasty with the statues of the 12 animal deities(Zodiac) and estimates the process of change. The features of the statues show a difference in their combination in terms of continuity and similarity of the object in their hands. In addition, there is a difference in the shape of the face of the stone statue, and differences are observed in the orientation and aspect ratio of the statue according to the sculptural method. The characteristics of these statues are somewhat different from the previously studied protected-stone and manufacturing techniques. For example, the Zodiac statues that are flattened from high relief to low relief are known to be decorated in realistic expressions, but they tend to be treated as separate conditions because they do not match the change of the stone. In addition, there was a characteristic that did not show regular changes, such as appearing and disappearing again when there was no balustrade in the tomb. Summing up the characteristics of each part, the Zodiac statues are largely divided into curved angles and flat angles according to the sculptural technique, and the head orientation and clothing of the statue are related. They are divided into two categories and can be viewed as having temporality according to the aspect ratio. These characteristic changes are consistent with the continuity of features and changes in the object in the hands of the 12 Zodiac statues. Therefore, the number of faces with protected-stone changes were gradually increasing in trend. As a result, there is a possibility that the Gujeongdong Square-shape Tomb and King Jindeok Tomb are earlier royal tombs than the Wonseong Royal Tomb. Therefore, the royal tombs of the late Silla Dynasty have a complete, tomb structure, containing the 12 animal god statues, ceremonial spaces(拜禮空間), Shindo(神道), stone statues(石像), and tombstones. This can be understood as a basic motif for the royal tomb structures of Goryeo and Joseon.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.69-84
• /
• 2021

As industrial structural changes in the 4th Industrial Revolution have recently led to the need for fostering high-tech industries and high-tech manufacturing industries have been showing high value-added creation, the importance of high-tech manufacturing ventures has increased a lot as well. As a result of this, the government is actively supporting and fostering them. However, it appears that high-tech manufacturing ventures seem to have a lot of difficulty in securing competitive advantages due to the lack of internal core competencies and experience in the rapidly changing international economic conditions. In order for high-tech manufacturing ventures to strengthen internal core competencies, external collaborations with other companies or institutions which have diverse experience, technology skills and abundant resources are actively promoted. Accordingly, based on resource-based theory and transaction cost theory, the authors analyzed the effects of the high-tech manufacturing ventures'external collaborations on internal core competencies and management performance in this study. In order to verify the hypothesis of this study, the 2020 data on"The Research on the Precision Status of Ventures'compiled by the Ministry of SMEs and Startups since 1999 were utilized. According to the results of this study, the experience of external collaborations had a positive impact on the internal core competencies and non-financial management performance, while there was no direct impact on financial management performance. Moreover, the relationship between the experience of external collaborations and management performance is mediated by the internal core competencies. Additionally, it was found that the internal core competencies positively affected both non-financial and financial management performances, and non-financial management performance again had a significant impact on the financial management performance. Finally, the experience of external collaborations had a positive impact on both development, manufacturing, and marketing factors forming the internal core competencies. However, the impacts of individual factors were different in the management performance. Development and marketing factors were shown to have a significant impact on both non-financial and financial management performance, while the manufacturing factor had a significant impact only on financial management performance.

• The Korean Society of Law and Medicine
• /
• v.22 no.2
• /
• pp.111-138
• /
• 2021

'Unlicensed medical practice by a non-medical practitioner' often represented by surrogate surgery or so-called 'ghost surgery,' causes irreparable damage to life or body, and therefore calls for very strict and effective controls. The 'bill on installment of CCTVs in an operating room' to prevent unlicensed surrogate surgery has been discussed for a long time, but due to numerous issues and heated confrontations, it has been pending in the National Assembly. Nevertheless, it is expected that the bill will be discussed again in earnest in the National Assembly because surrogate surgery and factory-type cosmetic surgery, which has been performed mainly in the field of cosmetic surgery, has also been occurring in the field of therapeutic surgery. In general, an operating room is considered as being locked or closed, as well as disallowing implicit complicity among insiders. Hence, if the insiders conspire to commit or cover up an illegal act, or if a surgeon performs rapid cosmetic surgery and then leaves the recipient (or medical institution) so as to perform more operations for profit - even if it is legitimate practice - it may result in serious consequences in terms of the recovery of a patient. In this case, installation of CCTVs can be of great help in identifying an illegal act and assessing any occurrence of negligence. On the other hand, while the fundamental purpose of therapeutic surgery is to restore a patient's life or body - that is, lifesaving - installation of CCTVs may base the relationship between a surgeon and a patient on distrust and surveillance, so it may increase the number of requests for CCTV footage or lead to more disputes, as well as placing a burden on the surgeon when best results are not achieved for a patient. As a result, the surgeon may choose non-invasive treatment contrary to conscience instead of risky but necessary surgery, or he/she may have significant difficulty in determining the timing of surgery, which may limit the provision of effective surgical medical care. Then, in terms of the relationship between a surgeon and patient, and in the long run, there could be significant disadvantages for the public and patients if CCTV footage is allowed. In this paper, we review domestic and overseas cases and issues regarding installation of CCTVs in an operating room, and present various viewpoints and suggestions to promote legislation with minimized legal problems and side effects, thereby contributing to protection of the lives and health of the public, patients, and recipients of surgery.

• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.61-96
• /
• 2022

This study tried to explore the ways to operate service learning more effectively by analyzing the educational effects of service learning and changes in learning sentiments that appeared in the service learning operation process established for the realization of the Christian educational philosophy at a small local Christian university. The analysis was conducted using NVivo11, focusing on the reflection journals of students who participated in service learning in the first semester of 2022 at J University. As a result of the study, through service learning, personal competence growth, self-reflection and will to change, self-esteem and self-efficacy, social and civic aspects, social responsibility enhancement, community (community) empathy and awareness of participation, and helping others There were educational effects such as an increase in the breadth of understanding. In addition, learning emotions that appeared in the service learning process included positive emotions such as gratitude, challenge recognition, pride, confidence, and responsibility, and negative emotions such as worry (difficulty), upset, regret, and awkwardness. It is a measure to increase the educational effect based on the learning emotion shown in the service learning process. When operating service learning, the service period at the visiting institution is increased to 6 weeks or more, and based on close interaction and detailed analysis of the educational environment in the planning stage, Suggest to develop and operate a plan. In addition, if you have the opportunity to receive feedback from your professors and colleagues through demonstrations and mock presentations in the classroom before visiting the institution, and finally have the opportunity to visit the institution again after the results of service learning are announced, more quality service learning education will be operated. Based on the results of this study, it is expected that more valuable and meaningful service learning education opportunities will be provided to learners by designing and operating a practical and sophisticated service learning curriculum.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.