• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.559-566
• /
• 2015

The aim of this study was to develop an analytical method for determination of T-2 toxin and HT-2 toxin level in cereals and to survey their levels using LC-MS/MS. The T-2 and HT-2 toxins were simultaneously analyzed by electrospray ionization with a positive ion mode and multiple reaction monitoring (MRM) after filteration and immuno-affinity column clean-up. A matrix-matched standard calibration used for quantification and recoveries of T-2 and HT-3 toxins were in the range of $100.6{\pm}7.2%$ and $96.8{\pm}9.4%$, respectively. Limits of detection and quantification of T-2 and HT-2 toxins were estimated to be 0.5 and $1.5{\mu}g/kg$, respectively. Each repeatability (RSRr) of T-2 and HT-2 toxins was determined to be 0.9~6.0%, and 4.9~6.1%, respectively. Total 115 samples cereals were collected from 9 types of cereals for analysis. The positive percentages of T-2 and HT-2 toxins obtained from collected samples were found to be 72% and 80%, respectively. The contamination level of T-2 toxin and HT-2 toxin in cereals were $37.1{\mu}g/kg$, and $5.4{\mu}g/kg$, respectively. Therefore, this study suggests that the developed method could be an useful analytical method to determine the T-2 and HT-2 toxin level in cereals and the present data could be used as a reference to estimate the risk assessment.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.727-736
• /
• 2006

Granular activated carbon (GAC) has been identified as a best available technology (BAT) by the United States Environmental Protection Agency (USEPA) for removal disinfection by-product (DBP) precursors, such as dissolved organic carbon (DOC) and dissolved organic nitrogen (DON). Rapid small-scale column test (RSSCT) were used to investigate four types of carbon (F400, Norit1240, Norit40S, and Aquasorb1500) for their affinity to absorb natural organic matter (NOM). DOC, $UV_{254}$, and Total dissolved nitrogen (TON) concentrations were measured in the column effluent to track GAC breakthrough. DOC and $UV_{254}$ breakthrough occurred at around 3500 bed volumes (BVs) of operation for all GACs investigated. The $UV_{254}$ breakthrough curves showed 33% to 48% at 8000 BVs, when the DOC was 48% to 65%. All GACs showed greater removal in DOC than $UV_{254}$. The NORIT1240 GAC was determined to have the highest adsorption capacity for DOC and $UV_{254}$. The removal of nitrate (NOTN) had not broken through over BVs. The initial TON breakthrough curves were started around 50%, when the DOC breakthrough was only 10 % at 500 BVs. The curves were gradually increased after 3500 BVs and approximately 69% through 81% of TON breakthrough occurred at 8000 BVs. All of the GACs were able to remove TON, in the case of this investigation the majority of the TON was present as DON. Because nitrate nitrogen was seldom removed and ammonium nitrogen ($NH_3-N$) was not detected in the effluent from RSSCTs even though raw water. The carbon usage rate of DOC was from 2 to 6 times less than that of TON. The NORIT1240 GAC demonstrated the best performance in terms of DOC removal, while the F400 GAC was best in terms of TON removal. Excitation emission matrix(EEM) analysis was used to show that GAC adsorption successfully removed most of Humic-like DOC and Fulvic-like DOCs. However, soluble microbial product(SMP)-like DOC in the absence of raw water were detected in the NORIT40S and Aquasorb1500 GAC. The authors assumed that this results is due probably to the part of GAC in the RSSCT which was converted into biological activated carbon(BAC). To compare with organics removal by GAC according to preloading, the virgin GACs had readily accessible sites that were adsorbed DOC more rapidly than preloaded GACs, but the TDN removal had not showed differences between those GACs.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.151-158
• /
• 2013

The effect of layered double hydroxides (LDH) on the gas separation properties of ethylene vinyl acetate copolymer was investigated. Mg-Al LDH/EVA nanocomposite membranes were prepared from solution intercalation using organically modified LDH (DS-LDH). Dodecyl sulfate (DS)-LDH was obtained by the intercalation of DS anion in the interlayer. The nanocomposite structure has been elucidated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). XRD pattern clearly shows that the DS-LDH layers are disorderly well dispersed in the EVA matrix. The maximum tensile strength and elongation of the LDH/EVA nanocomposite membrane were found with the LDH content 3 wt%. The thermal properties of nanocompostie membrane were enhanced by the incorporation of LDH in EVA matrix. Gas permeation of LDH/EVA nanocomposite membranes with LDH contents of 1, 3, 5 wt% was studied for $O_2$ and $CO_2$ single gases. The presence of 3 wt% LDH decreased $O_2$ permeability by up to 53% compared to the EVA membrane. In spite of barrier property of nanocomposite membrane, however, the gas permeability for $CO_2$ was increased due to its strong affinity with the residual OH groups on the LDH.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.389-397
• /
• 2011

In this study, polymer composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared using a solution casting method with different amount of vermiculite (VMT) content. The dispersion of VMT particles in the SPAES matrix was confirmed by means of a scanning electron microscopy observation. The composite membrane containing less than 1 wt% of VMT has a smooth skin on the top and bottom, which means there is a good dispersion of VMT in the matrix. The water uptake of the composite membranes gradually increases as the temperature increases, and the results confirm that all the adsorbed water is bound water because VMT has a strong water affinity on account of its high cation exchange value. A composite membrane with a VMT content of less than 1 wt% increases the proton conductivity and reduces the methanol permeability. Of all the composite membranes, the membrane SPAES/VMT 1.0 has the best fuel cell performance in terms of membrane selectivity. The performance value of SPAES/VMT 1.0 is double that of Nafion 112, which suggests that SPAES/VMT1.0 could be an excellent candidate for direct methanol fuel cells.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.404-416
• /
• 2021

In this study, a mixed matrix membrane was prepared by varying the contents of GO and PEI-GO synthesized in PEBAX2533, and the permeation characteristics of N₂ and CO₂ were studied. The N₂ and CO₂ permeability of the PEBAX/GO mixed membrane decreased as the GO content increased, and showed the highest CO₂/N₂ selectivity of 58.9 at GO 0.3 wt%. For the PEBAX/PEI-GO mixed membrane, the N₂ permeability decreased as the PEI-GO content increased, and the CO₂ permeability showed a different trend according to the PEI-GO content. Overall, the CO₂/N₂ selectivity was higher than that of the PEBAX/GO mixed membrane. In particular, PEI-GO 0.3 wt% showed the highest CO₂/N₂ selectivity of 73.5 among the mixed membranes, and a positive result was obtained as it was located above the Robeson upper bound. This is believed to be due to the molecular sieving channel effect resulting from the original GO structure, the functional groups present in the structure of GO having affinity for CO₂, and the effect of amine bound to PEI by modifying GO into PEI.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.47-52
• /
• 1998

3-Hydroxy-3-methylglutaryl-CoA reductase (HMGR) catalyzes the conversion of HMG-CoA to mevalonic acid, the first intermediate of isoprenoid biosynthetic pathway in plants. The enzyme was solubilized with 0.4% Brij (polyoxyethylene ether) W-1 from a microsomal fraction of etiolated rice seedlings (Oryza sativa L.) in which its maximal activity was observed on the fourth day after germination. HMGR was purified to near homogeneity by employing $(NH_4)_2SO_4$ fractionation plus chromatographic procedures including DEAE-Sephadex A-50 and HMG-CoA-hexane-agarose affinity column. The size of the purified enzyme was estimated to be 55 kDa when judged by SDS-PAGE analysis with silver staining method. The apparent $K_m$ and $V_{max}$ values for HMG-CoA were determined to be $180\;{\mu}M$ and 107 pmol/min/mg, and those for NADPH were $810\;{\mu}M$ and 32.1 pmol/min/mg, respectively.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.530-537
• /
• 2014

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at $25^{\circ}C$. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.301-310
• /
• 2003

The purpose of this study is to evaluate the biocompatibility and the biorsorbability of several types of calcium polyphosphate made through change of manufacturing process for 12 month. To solve limitation of calcium phosphate, we developed a new ceramic, Calcium Polyphosphate(CPP), and report the biologic response to CPP in extraction sites of beagle dog. Porous CPP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$ and then milled to produce CPP powder. CPP powder, CPP block, and CPP granules added with $Na_2O$ were implanted in extraction sockets and histologic observation were performed at 12 months later. Like 3 months results, histologic observation at 12 months revealed that CPP matrix were mingled with and directly apposed to new bone without any adverse tissue reaction, CPP powder show direct bony contact, but new bone formation and fibrous tissue encapsulation showed in CPP block. 10% $Na_2O$ CPP granules show more inflammatory cells infiltration around graft materials compared at 3 month, but 15% $Na_2O$ CPP granules show less. This result revealed that regardless of addition of $Na_2O$, CPP had a high affinity for bone and had been resorbed slowly. From this results, it was suggested that CPP is promising ceramic as a bone substitute and addition of $Na_2O$ help biodegradation but optimal concentration of $Na_2O$ and other additive component to increase degradation rate should be determined in further study.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.129-140
• /
• 2010

Large portal sites such as Google, NAVER provide Various services based on the map. Thus, interest and demand of users who want to obtain the region-related information has been increased. And services that combine the regional information with the map are provided currently at the large portal sites. However, the existing services of large portal sites do not provide enough detailed information and are inconvenient because acquisition process of related information is repeated. Therefore, the system that enables users to obtain detailed information related on the specific region synthetically and easily is needed. In this paper, we propose a system model using map interface and knowledge-processing in order to build the system that is useful for acquiring regional information. The model consists of 3-Layers: 'Regional Information Web-Documents Layer', 'Unique Regional Information Layer', and "Map-Interface Layer'. The Integrated Region~Related Information Searching System based on the model is implemented through the following 4-steps: (1) extracting the keywords that represent specific region (2) collecting the related web pages (3) extracting a set of related keywords and computing an association between the keywords (4) implementing a user interface. We verified validity on the model we proposed. knowledge-processing algorithm using affinity matrix, and UI that help users conveniently search by applying the system to region of the Goyang City. This system integrates regional information existing merely individual 'information' and provides users the 'knowledge' that is newly produced and organized. Users can obtain various detailed regional information and easily get related information through this system.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.147-153
• /
• 2017

In this study, we investigated permeation properties of single gas ($N_2$, $O_2$, $CO_2$) through membranes composed of poly(ethylene oxide) (PEO) and poly(ethylene-co-vinyl acetate) (EVA) blend. The prepared membranes showed no new absorbance peaks, which indicate the physical blending of PEO and EVA by FT-IR analysis. SEM observation showed that the crystalline phase of PEO decreased with increasing EVA content in the PEO/EVA mixed matrix. DSC analysis showed that the crystallinity of the PEO/EVA blend membrane decreased with increasing EVA content. Gas permeation experiment was performed with various feed pressure (4~8 bar). The permeability increased in the following order: $N_2$ < $O_2$ < $CO_2$. The permeability of $CO_2$ in PEO/EVA blend membranes were increased with increasing feed pressure, However, the permeability of $N_2$ and $O_2$ were independent of feed pressure. On the other hand, the permeability of all the gases in PEO/EVA blend membranes increased with increasing amorphous EVA content in semi-crystalline PEO. In particular, the blend membrane with 40 wt% EVA showed $CO_2$ permeability of 64 Barrer and $CO_2/N_2$ ideal selectivity of 61.5. The high $CO_2$ permeability and $CO_2/N_2$ ideal selectivity are attributed to strong affinity between the polar ether groups of PEO or the polar ester groups of EVA and polar $CO_2$.