• Composites Research
• /
• v.35 no.6
• /
• pp.469-476
• /
• 2022

In this paper, the microwave absorbing characteristics after the impact of the radar-absorbing structure (RAS) consisting of periodic pattern sheet (PPS) and glass fiber-reinforced plastic (GFRP) were experimentally investigated. The fabricated RAS effectively absorbed the microwave in the X-band (8.2-12.4 GHz). In order to induce the damage to the RAS, a low-velocity impact test with various impact energy of 15, 40, and 60 J was conducted. Afterward, the impact damage was observed by using visual inspection, non-destructive test, and image processing method. Moreover, the absorbing performance of intact and damaged RAS was measured by the free-space measurement system. The experiment results revealed that the delamination damage from the impact energy of 15 J did not considerably affect the microwave absorbing performance of the RAS. However, fiber breakage and penetration damage with a relatively large damaged area were occuured when the impact energy was increased up to 40 J and 60 J, and these failures significantly degraded the microwave absorbing characteristics of the RAS.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.1-13
• /
• 2022

Agrivoltaic facility is the composite system that the solar panel is installed above the farmland, and it enables crop and electricity production simultaneously. Solar panels of the agrivoltaic facilities can block and reduce the amount of solar irradiance arriving at the farmland, but it can help the crop growth by preventing excessive solar irradiance. Therefore, to clarify how the agrivoltaic facilities affect the crop growth, precise solar irradiance distribution under the solar panel should be modeled. In this study, PAR (photosynthetically active radiation), radiation from 400 to 700 nm, which crops usually use to grow, was extracted from the total irradiance and its distribution model under various conditions was developed. Monthly irradiance distributions varied because the elevation of the sun was changed over time, which made the position changed that the local maximum and minimum irradiance appear. The higher panel height did not cause any significant difference in the amount of irradiance reaching below the solar panel, but its distribution became more uniform. Furthermore, the panel angles with the most irradiance arriving below the solar panel were different by month, but its difference was up to 2%p between the irradiance with 30° angle which is usually recommended in Korea. Finally, the interval between panels was adjusted; when the ratio of the length of the panel to the empty space was 1:2, the irradiance of 0.719 times was reached compared to when there was no panel, 0.579 times for 1:1 and 0.442 times for 2:1.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.185-198
• /
• 2022

Purpose : We conducted a study to propose comparing subjective sleeping states data that was collected through scientifically measuring by using smartwatch and surveys for seafarers. In addition, we conducted a study to provide sleep though analysis of the environmental factors that influence the sleep efficiency of seafarers. Methods : For scientific measurement of seafarers' sleeping states, we measured the sleep hours and sleep efficiency for at least 3 days by using the healthcare function of smartwatches which are wearable devices. As for subjective sleeping states, we collected data on sleep hours and satisfaction rates on the quality of sleep through a survey. Lastly, as for the environmental factors that affect the sleep efficiency which is measured by smartwatches such as physical environment, bedroom space, bedroom furniture, bedding, a survey by self-evaluation method was conducted. Results : There were significant differences in the scientific sleep hours measurement values for all seafarers and the average sleep hours in the subjective survey. There were significant differences in the scientific sleep efficiency measurements of all the seafarers and the sleep satisfaction of the subjective survey, and there was no correlation between the scientific sleep efficiency and the subjective sleep satisfaction of all the seafarers. Among the environmental factors affecting the sleep efficiency of the seafarers, humidity variable had the most influence, and vibration and illuminance variables were also shown to have a very significant effect. Conclusion : We propose the measuring method that can analyze the quantitative and qualitative sleep states of the seafarers by using small activity recorders. In addition, it is very important to control humidity, vibration, and illuminance among ship environmental factors, and comfort, noise and bedroom size should also be reflected.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.265-280
• /
• 2023

Water leakage in tunnels is a defect that can affect tunnel stability and the ground movement by changing the stress and pore water pressure of the surrounding ground. Long-term or large-scale water leaks may lead to damage of tunnel structure and the surrounding environment, such as tunnel lining instability and ground surface settlement. The present study numerically investigated the effects of water leakage on the structural stability of a tunnel and the ground behavior. The tunnel was assumed to be under undrained conditions for preventing the inflow of the surrounding water and leaks occurred in the concrete lining after completion of the tunnel construction. A coupled hydro-mechanical analysis using a TOUGH-FLAC simulator developed in Python was conducted for assessing the leakage induced-behavior of the tunnel structure and ground under different conditions of the amount and location of water leak. Additionally, the effect of hydro-mechanical coupling terms on the results of coupled response was investigated and discussed.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.154-165
• /
• 1993

A stochastic method using continuous time Markov process is presented to model the one-dimensional convective nuclide transport in geologic media, which have usually heterogeneous feature in physical/geochemical parameters such as velocity, dispersion coefficient, and retardation factor resulting poor description by conventional deterministic advection-dispersion model. The primary desired quantities from a stochastic model are the mean values and variance of the state variables as a function of time. The time-dependent probability distributions of nuclides are presented for each discretized compartment given the volumetric groundwater flux and the intensity of transition. Since this model is discrete in medium space, physical/geochemical parameters which affect nuclide transport can be easily incorporated for the heterogeneous media as well as remarkably layered media having spatially varied parameters. Even though the Markov process model developed in this study was shown to be sensitive to the number of discretized compartments showing numerical dispersion as the number of compartments are increased, this could be easily calibrated by comparing with the analytical deterministic model.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.145-154
• /
• 2022

With the real museum changing from a center of viewing to a center of experience and communication, virtual museums have become independent as well as auxiliary and alternative roles for real museums. Therefore, it is necessary to review the concept and meaning of virtual museums and analyze the attributes of each exhibition type. This paper categorizes the exhibition types of virtual museums into four categories and analyzes the interaction methods of each exhibition type. The essential characteristics of interaction subjects affect all four types, but the method of virtual expression is distinguished, and the exhibition type that actively utilizes the virtuality of exhibition space and work expands the user's experience and communication. In this study, various forms and methods of construction of virtual museums can be explored by providing characteristics and considerations for each type of exhibition during the planning and construction of virtual museums.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1233-1243
• /
• 2023

Shell-and-tube heat exchanger (STHX) is widely used by virtue of its simple structure and high reliability, especially in a space-constrained surface ship. For the STHX of the surface ship, roll, pitch and other motion of the ship will affect the heat transfer performance, resistance characteristics and structural strength of the heat exchanger. Therefore, it is urgent to carry out numerical simulation research on three-dimensional thermal hydraulic characteristics of surface ship STHX under the marine conditions. In this paper, the numerical simulation of marine shell and tube heat exchanger of surface ship was carried out using the porous media model. Firstly, the mathematical physical model and numerical method are validated based on the experimental data of a marine engine cooling water shell and tube heat exchanger. The simulation results are in good agreement with the experimental results. The prediction errors of pressure drop and heat transfer are less than 10% and 1% respectively. The effect of marine conditions on the heat transfer characteristics of the heat exchanger is investigated by introducing the additional force model of marine condition to evaluate the effect of different motion parameters on the heat transfer performance of the heat exchanger. This study could provide a reference for the optimization of marine heat exchanger design.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.26-37
• /
• 2023

Urban air mobility (UAM) is being developed as part of the next-generation aircraft, which could be a viable solution to entrenched problems of urban traffic congestion and environmental pollution. A new airport platform called vertiport as a space where UAM can take off and land vertically is also being introduced. Noise regulations for UAM will be strict due to its operation in a highly populated urban area. Ground effects caused by vertiport can directly affect aerodynamic forces and noise characteristics of UAM. In this study, ground effects of vertiport on aerodynamic loads, vorticity field, and far-field noise were analyzed using Lattice-Boltzmann Method (LBM) simulation and Ffowcs Williams and Hawkings (FW-H) acoustic analogy with a permeable surface method.

• Journal of People, Plants, and Environment
• /
• v.22 no.5
• /
• pp.411-424
• /
• 2019

This study analyzed the factors affecting urban residents' expectations and participation in community gardens to present basic data of guidelines for community garden management. Urban citizens valued the necessity of community gardens overall, especially residents with outdoor gardens. The experience of private gardens was important in perceiving the need for community gardens, which are public spaces. The creation of community gardens had high expectations for social aspects such as improving quality of life, health promotion, and community revitalization. In particular, residents living in individual housing have high expectations for revitalization of the community, and community gardens can be a mediator for forming and maintaining local communities. Through this, the citizens' perception on the role and function of the garden as a community space could be examined. Expectations for quality of life, health promotion, and community revitalization are factors affecting the necessity of community garden. Participation was high in the creation and management of the community garden, and the necessity of community gardens, expectation for community revitalization, and expectation for environmental purification are factors that affect participation in the management of community gardens. The amount of donations that the residents are willing to pay for community garden management was KRW 75,222 /year on average. Overall, residents with higher need for community gardens and higher social expectation showed higher participation. Urban citizens have high expectations for community gardens, and they perceive the importance of social aspects more than personal aspects such as community revitalization and quality of life. As a strategy for increasing community involvement, it is necessary to set up the processes, determine participants' composition and roles, and establish a system to promote participation. Considering welfare aspects such as community revitalization and improvement of residents' quality of life, motivation and administrative support for participation in the creation and management of community gardens will serve as important factors.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.649-659
• /
• 2023

Smart work, which utilizes ICT technology to work without time and space constraints, has been difficult to introduce and spread despite a lot of research and investment based on the 'smart work vitalization strategy' that began in 2010. Although the environment of COVID-19 in 2019 was an opportunity to promote the adoption of smart work. After that, many companies ended or reduced the adoption of smart work again. This study was initiated to examine the factors that resist the introduction of smart work based on the innovation resistance model and to suggest alternatives. As a result of this study, relative advantage showed a strong effect on both introduction resistance and introduction intention. However, it was confirmed that perceived risk and complexity did not directly negatively affect introduction intentions, but had a negative effect on introduction intentions through mediating resistance to introduction. Through the results of this study, it was confirmed that if the practical benefits of smart work were emphasized and negative attitudes were reduced, the resistance to introduction would be lowered and the intention to introduce it would be positively affected.