• Composites Research
• /
• v.20 no.2
• /
• pp.27-31
• /
• 2007

"Structural surface becomes an antenna." This term, CAS, indicates antenna embedding in structural surfaces. The CAS is composed of several composite laminates and Nomex honeycombs, and microstrip antenna elements are inserted between layers with designed configurations. Constituent materials are selected considering electrical contributions as well as mechanical performances. Antenna design with adhesive films are impossible because of their thin and rough distributions between honeycomb and substrate. Therefore, adhesive effects on antenna performances in CAS are experimentally investigated, CAS with targeted impedance and radiation characteristics are designed considering adhesive effects. multilayer

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.222-226
• /
• 1998

$Cu_3N$ film deposited on silicon oxide substrate by r.f. reactive sputtering technique. Synthesis and properties of copper nitride film were investigated for its possible application to Cu metallization as adhesive interlayer between copper and $SiO_2. Cu_3N$ film was synthesized at the substrate temperature ranging from $100^{\circ}C$ to $200^{\circ}C$ and at nitrogen gas ratio above $X_{N2}=0.4. Cu_3N, CuN_x$, and FGM-structured $Cu/CuN_x$ films prepared in this work passed Scotch-tape test and showed improved adhesion property to silicon oxide substrate compared with Cu film. Electrical resistivity of copper nitride film had a dependency on its lattice constant and was ranged from 10-7 to 10-1 $\Omega$cm. Copper nitride film was, however, unstable when it was annealed at the temperature above $400^{\circ}C$.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2013

This study aims to investigate the film performance by physical properties of glue and gelatin in traditional paint(Dancheong). To do this, homemade, commercial glue and gelatin was selected and evaluated water reaction and weatherproof. The result, the highest gel strength, gelatin was better than acrylic acid ester resin, when compared with hygroscopic property and adhesive property. And that was better than in any others, when compared with water-proofing.

• Journal of Information Display
• /
• v.4 no.1
• /
• pp.17-23
• /
• 2003

A thermoset type anisotropic conductive adhesive film (ACAF) comprising epoxy resin and natural butyl rubber (NBR) as the binder, micro-encapsulated imidazole as the curing agent, and Ni/Au coated polymer bead as a conductive particle has been studied. These films have been prepared to respond to requirements such as improved contact resistance, current status less of than 60 ${\mu}m$ and reliability. These films can also be used for connection between the ITO glass for LCD panel and the flexible circuit board. The curing conditions for the connection were 40, 20 and 15 seconds at 150, 170 and 190 $^{\circ}C$, respectively. The initial contact resistance and adhesion strength were 0.5 ${\Omega}/square$ and 0.4 kg/cm under the condition of 30 kgf/$^{cm}^2}$, respectively. After completing one thousand thermal shock cycling tests between -15 $^{\circ}C$ and 100 $^{\circ}C$, the contact resistance was maintained below 0.7 ${\Omega}/square$. Durability against high temperature (80$^{\circ}C$) and high humidity (85 % RH) was also tested to confirm long-term stability (1000 hrs) of the conduction.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.107-112
• /
• 2022

In this study, a silver paste capable of UV curing without using any solvent was developed. The viscosity and viscoelasticity of the silver paste developed as a solvent-free type were measured. And after printing the pattern by screen printing, an electrode coating film was formed by UV curing. Conductivity, pencil hardness, and adhesive force of the formed electrode coating film were evaluated. Finally, the curing characteristics of the electrode coating film were evaluated by TGA and FT-IR. Summarizing these results, in terms of conductivity, adhesion, and curing characteristics, it was found that Paste (4), that is, silver paste obtained by mixing 1.2 ㎛ spherical silver powder and 50 nm silver powder at 72:8% had the best physical properties.

• Journal of Adhesion and Interface
• /
• v.18 no.3
• /
• pp.134-140
• /
• 2017

In this study, we made UV cured acrylic pressure sensitive adhesive containing silicone-urethane-acrylate (SUA) oligomer for a coating on protective film and investigated the effect of SUA oligomer content and UV-dose on adhesion properties. The results illustrated that peel strength decreases with increasing oligomer content and UV-dose, while holding power increases. The gel fractions sharply increased after UV irradiation and then remain constant with prolonged UV exposure. From peel-off test, sample S70 (70% oligomer content) shows the best peelability and removability without remaining any mark or adhesive material on the test substrate than S50 (50% oligomer content) and S60 (60% oligomer content). Sample S70 also showed a surface energy lower than $26mJ/m^2$ and a transmittance higher than 95% at UV-dose 1857 and $2270mJ/cm^2$ which met the required properties for protective film application.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.44-50
• /
• 2007

The objective of this study was to investigate the influence of the vehicle resin on the coating performance of Dan-Chung. The starch glue (F), fish glue (G), and aqueous acrylic resin emulsion (E) were used as vehicle resins. Panels coated with Dan-Chung were tested at accelerated weathering and outdoor conditions. Aqueous acrylic resin was proved as an excellent vehicle resin for Dan-Chung, because there was no flaking in Dan-Chung film after accelerated weathering and outdoor exposure. Discoloration of Dan-Chung using E was the smallest among the acceleratedly weathered panels. Adhesive property of Dan-Chung film using G was. remarkably improved by G-undercoating. On the contrary, G-undercoating lowered adhesive property of Dan-Chung film using E.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.381-385
• /
• 2022

It is very important to secure the adhesion durability between the base film and the conductive paste for the development of a sensor for detecting hazardous chemicals. In this study, an ester binder was used to improve the adhesive properties which can be a problem when applying the sensor to the cross cut 0B or 1B grade. This problem was found while evaluating the adhesive properties by coating the polyaniline/graphene nano plate (GNP) paste on the polyethylene terephthalate (PET) film. When 10 wt% or more of the ester-based binder was added, the cross cut grade to which the sensor can be applied was 3B or higher. It was confirmed that the excessive addition of the binder may affect the electrical properties of the conductive paste and actually decrease the reactivity to sulfuric acid. To improve the electrical property, a carbon black (CB) content was varied resulting in the optimum electrical property observed at 2 wt% of CB.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.369-375
• /
• 2023

Radon, a carcinogenic substance generated from soil or building materials, have to be fundamentally blocked from entering indoors. In this study, ethylene vinyl acetate (EVA)/silicone emulsions with excellent mechanical and thermal properties and effective blocking of radon gas were prepared by using radiation technology. As the electron-beam irradiation does increased, a partially crosslinked structure was formed in EVA molecular chain, increasing tensile properties and adhesive strength. The EVA/silicone film showed excellent thermal stability without deformation. In addition, the non-irradiated EVA/silicone film showed a radon blocking rate of about a 75%, while the EVA/silicone film irradiated with 3 and 5 kGy showed an excellent radon blocking rate of over 90% due to the formation of crosslinked structure in the EVA molecular chain. These results indicated that the radiation technology can effectively block radon by forming a partially crosslinked structure of EVA/silicone emulsion to improve tensile property, adhesive strength, and deformation stability.

• Advances in pediatric surgery
• /
• v.7 no.2
• /
• pp.118-125
• /
• 2001

The effectiveness of operative and non-operative management for postoperative adhesive ileus in children has been discussed. This study reviews the clinical characteristics and the treatment consequences of adhesive ileus in our institution. Department of Surgery of Chunbuk National University Hospital, retrospectively. A total of 62 cases of post-operative small bowel obstruction treated between January 1975 and December 1998 under the 15 years of age are included in this study. The patients were divided into two groups, operative(n=26) and non-operative(n=36) groups. The prevalent age was between 11 and 15 years(28 cases; 45.2 %), and the most common previous operation was appendectomy(28 cases; 45.2 %). The most common operative procedures were adhesiolysis(17 cases; 65.4 %). The interval between admission and operation was 1 day in 11 cases(42.3 %). The most common site of adhesion was the ileum in 13 cases(50.0 %) and band constriction was the most frequent pattern(8 cases; 30.8 %). Intestinal resection was significantly high in delayed operations of more than four days, in the patients with three or more classical signs of strangulation(fever, tachycardia, leukocytosis, abdominal pain, rebound tenderness), and in the cases of complete obstruction on plain abdomen film(p < 0.05). In conclusion, operation should be considered in cases with three or more signs of strangulation, no clinical improvement for over four days of conservative treatment, and signs of complete obstruction on plain abdomen film during the observation periods.