• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.102-102
• /
• 2009

The purpose of this study is to establish the predictive equation of transversal residual stress at the thick weldment of large container ship. In order to do it, the variables used for this study were restraint degree, yield strength of base material, thickness of weldment and welding heat input. Here, the level of restraint degree at the thick weldment of container ship having the various welding sequence was calculated using FEA. From the result, the h-type specimen was designed to simulate the level of restraint degree at the actual weldment of containership. With H-type test specimen designed, the effect of the variables on the distribution of transversal residual stress at the weldment in a container ship was evaluated using the comprehensive FEA. Based on the results, the predictive equations of mean value and the distribution of transverse residual stress in each location of residual stress were established using dimensional analysis and multiple-regression method. The validation of predictive equations was verified by comparing with measured results by XRD in the actual weldment of the ship.

• Journal of Fashion Business
• /
• v.27 no.2
• /
• pp.52-69
• /
• 2023

Based on five types of health KF masks currently being commercialized, this study analyzed results of a survey of 316 male and female college students with experience in wearing health masks in Seoul metropolitan area. By identifying problems and improvement requirements according to current status of wearing health masks, results of this study could be used as basic data for designing ergonomic health mask with improved ease of wearing and satisfaction for human safety protection in the future. SPSS 26.0 statistical program was used for all data analyses, including post-hoc test, χ² test for cross-analysis, frequency analysis, independent samples t-test, ANOVA, and Duncan test. Considering that masks are worn for more than 8 hours a day on average, it is necessary to design masks considering materials, sizes of mask ear straps, elasticity and thickness of straps. The design should minimize contact with lips and cheeks with improved fit and comfort, blocking performance, and aesthetics. According to this survey, nearly 50% of respondents said they were willing to wear masks even after the end of COVID-19. Thus, it is necessary to perform research and improve masks to have excellent colors, designs, shapes, fit, and functions suitable for both pandemic and post-pandemic era when wearing masks is common.

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.135-139
• /
• 2002

Purpose: To determine the proper reference step wedge for digital Cu-Equivalent Image analyzing systems for measurement of bone density. Meterials and Methods : Radiograms of lumbar vertebrae phantom (1g/㎠) with 3 test copper step wedges of 0.03, 0.05 and, 0.1 mm thickness unit were taken and analyzed using NIH image software on a Macintosh personal computer. Measured densities of the lumbar areas in the Cu-Equivalent images made by utilizing 3 different copper stepwedges were compared with a known bone density. Results: The values of r2 for all copper equivalent images were over 0.99. The mean Cu-Eq value of lumbar in copper equivalent image made by a 0.1 mm copper stepwedge was 0.22 ± 0.06 mm and converted to hydroxyapatite density of 1.03 g/㎠. The stepwedges of 0.03 and 0.05 mm produced results having higher values than the actual known bone density. They did not show the blue and green color level that appeared in lumbar on color enhanced image. Conclusion : A copper stepwedge of adequate thickness and range of steps which can express the range of density of bone being measured should be used.

• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.151-158
• /
• 1995

In this study, the width spreads of spring steel including Mn-Cr steel(SUP 9A), Mn-Cr-V steel(SUP 11A), and Si-Cr steel(SAE 9254) and were investigated under different reduction ratios and thickness-width ratios friction coefficients. The experimental results were compared with the theoretical prediction by the Ekelund equation, Geuze equations, etc. The width spreads of the three spring steels were found to be 10-15% larger than mild steel, and the optimal reduction ratio for the spring steel was found in a range from 20 to30%. Among the spring steels, the width spread of Mn-Cr-V steel was measured to be the largest followed by those of Si-Cr steel and Mn-Cr steel. It was found that the width spread increased with friction coefficient, width-thickness ratio and reduction ratio as predicted. However, the theoretical predictions revealed smaller width spread than the experimental results. This finding indicates that the coefficients of the width spread of the theoretical models need to be modified in order to predict the actual behavior of the width spreading of the spring steels. In this study, the coefficients of width spread of the Geuze equation were determined from the experimental results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.376-385
• /
• 1991

For manufacturing trimming-free plates which have rectangular shaped edges and straight edges in as-rolled state, it is necessary to investigate rolling characteristics of overlap, bulge and width deviation etc. in a standardized plate rolling process. The present wok is for preventing edge overlap as the first approach to develop trimming-free plate rolling technique. An experimental study on overlap control was done with plasticine material in order to examine influence factors and find a control method by use of a laboratory mill scaled down to one tenth of actual production mill. It was found that edge overlapping was increased with the increase of slab thickness and of broadside rolling ratio, but decreased with the increase of chamfered amount on slab edges. In the simulated rolling experiment with edge chamfered slabs of various chamfered angles, the chamfered angle of 60.deg. was the most effective one for reducing overlapping irrespective of slab thickness and of broadside rolling ratio.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.68-81
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding. The analytical solution is obtained by solving a transient three -dimensional heat conduction equation with convection boundary conditions on the surfaces of an infinite plate with finite thicknesses, and mapping an infinite plate onto the fillet weld geometry with energy equation. The electric arc heat input on fillet weld and on infinite plate is assumed to have a traveling bivariate Gaussian distribution. To check the validity of the solution, GTA and FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross - sections at various distances from the arc start point are compared with those of simulation result. As the result shows a satisfactory accuracy, this analytical solution can be used to predict the transient temperature distribution in the fiIIet weld of finite thickness under a moving bivariate Gaussian distributed heat source. The simplicity and short calculation time of the analytical solution provides rationales to use the analytical solution for modeling the welding control systems or for an optimization tool of welding process parameters.

• Journal of Fashion Business
• /
• v.16 no.3
• /
• pp.63-77
• /
• 2012

This study action drama TV drama 'Ya-ha'(夜叉) the actual work practices of the pre-consultation stage through the Writers, Producer, Art directors and in consultation with the opinion of the character set the record of the contents and character changes over time in accordance with characters makeup the design elements were analyzed. The methods of study was used local and abroad related books, studies, publications and cases and the subjects were limited to be four male make up characters in drama 'Ya-cha'. As a result, TV action drama 'Ya-cha' make up design elements and representation techniques were classified as description of skin tone, wound, the shape of eyebrows, hair type, shape of beard and materials and carried out an important role in the character representation. First, presentation techniques changed skin tones depending on character and position and described wound shape as expression technique and materials were analyzed. Second, the shape of eyebrows was based on the physiognomy of the form. And hair type changed volume, thickness, length and texture depending on character. Third, shape of beard is expressed different kinds of volume, thickness, length and texture depending on character. There fore, that systematization of the make-up design elements is useful to express stable characters and make drama for make up in various image genres.

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.55-62
• /
• 2001

The fire performance evaluation methods in Korea and overseas for interior finish materials were analysed and tested with gypsum board and Plywood by using room corner test not adopted by domestic code until now. The results of gypsum board (thickness:8 mm) and Plywood (thickness:4 mm) applying NFPA 265 and ISO 9705 test respectively are satisfied the assessment criteria. To assess a actual fire performance and classify fire hazard levels for interior finish materials, room-corner test and flame spread models should be adopted in building code and fire code to overcome limitations of current bench-scale test method.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.33-36
• /
• 2007

The majority of fly ash pipes in thermal power stations use steel pipes. This makes frequent replacement inevitable due to severe abrasion near the hot and curved section of pipes. Recently, there have been efforts to prevent this abrasion with lining techniques using ceramic or basalt on the inner wall of the pipe. This study uses composite and anti-wear material to maximize the anti-abrasion effects on the hot section of the pipe. The thickness of the abrasion layer was determined by the abrasion ratio of material found through the experiment; the thickness of the reinforcement layer was determined by micromechanics. Experiments were conducted on epoxy resins to test for heat and abrasion. Anti-abrasion test using particle impingement was intended to recreate realistic conditions when abrasion occurs within the hot section of an actual pipe. This study analyzes the abrasion ratio obtained from both the specimen experiment and from on-site measurement and provides evidence that a combination of composites and anti-wear agent can be used to create a fly ash pipe that is lower in costs and higher in quality than what is used currently.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1078-1088
• /
• 2012

In this paper, we present research experimental results about the different thickness T-joint welding of the high power continuous wave(CW) Nd:YAG laser for the secondary battery of a vehicle. Although the conventional method used for the secondary battery is a argon TIG welding, we utilize a laser welding to improve Tungsten Inert Gas(TIG) welding's weakness. The laser, which has a couple of advantage such as aspect ratio, low Heat Affected Zone(HAZ), good welding quality and fast productivity utilized in this work is a CW Nd:YAG laser. In order to observe laser welding sections, we used a optical microscope. Through the analysis of the metallographic, hardness, aspect ratio, and heat input, we obtained the desired data in condition of 1800 W laser beam power and 1.8 m/min and 2.0 m/min laser beam travel speeds. In order to compare electric resistances of the argon TIG welding and laser welding, we made an actual battery and the electric resistance of the laser welding is reduced by 40~45% comparing with the argon TIG welding.