• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.33-33
• /
• 2007

SoP-L 공정은 유전율이 상이한 재료를 이용하여 PCB 공정이 가능하고 다른 packaging 방법에 비해 공정 시간과 비용이 절약되는 잠정이 있다. 본 연구에서는 SoP-L 기술을 이용하여 Si 기판의 함몰에 판한 공정의 안정도와 함몰 시 제작된 때턴의 특성의 변화에 대해 관찰 하였다. Si 기판의 함몰에 Active device를 이용하여 특성의 변화를 살펴보고 공정의 안정도를 확립하려 했지만 Active device는 측정 시 bias의 확보와 특성의 민감한 변화로 인해 비교적 측정이 용이하고 공정의 test 지표를 삼기 위해 passive device 를 구현하여 함몰해 보았다. Passive device 의 제작 과정은 Si 기판 위에 spin coating을 통해 PI(Poly Imide)를 10um로 적층한 후에 Cr과 Au를 seed layer로 증착을 하였다. 그리고 photo lithography 공정을 통하여 photo resister patterning 후에 전해 Cu 도금을 거쳐 CPW 구조로 $50{\Omega}$ line 과 inductor를 형성하였다. 제작 된 passive device의 함몰 전 특성 추출 data와 SoP-L공정을 통한 함몰 후 추출 data 비교를 통해 특성의 변화와 공정의 안정도를 확립하였다. 차후 안정된 SoP-L 공정을 이용하여 Active device를 함몰 한다면 특성의 변화 없이 size 룰 줄이는 효과와 외부 자극에 신뢰도가 강한 기판이 제작 될 것으로 예상된다.

• 한국식생활문화학회지
• /
• 제34권2호
• /
• pp.233-239
• /
• 2019

This paper presents a literature review on the active technologies to regulate the levels of carbon dioxide and oxygen in Kimchi packaging. In this study, laser-etched pouches and $O_2$ scavengers were used for Kimchi packaging, and the efficiency of each packaging technique to regulate the $CO_2$ and $O_2$ levels inside Kimchi packages was investigated. When Kimchi was packaged with a laser-etched pouch, the $CO_2$ concentration in the sample with a high gas transmission rate was less than that in other pouches (p<0.05), and a low $CO_2$ level had little effect on the expansion of the package volume. Kimchi treated with an $O_2$ absorber exhibited a significantly lower (p<0.05) $O_2$ concentration inside the packages relative to the control. A low $O_2$ concentration inside the Kimchi package effectively inhibited the growth of total aerobic bacteria and lactic acid bacteria, as well as yeasts and molds on Kimchi. These results suggest that $O_2$ absorbers have a positive effect on the microbial quality of Kimchi. Therefore, packaging in a laser-etched pouch and the use of an $O_2$ scavenger could provide a novel packaging material for regulating the $CO_2$ and $O_2$ levels during Kimchi packaging.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2002

본 연구에서는 이동통신 시스템의 키부품으로 필수적인 멀티미디어용 고주파 Active Filter 및 초소형 설계기술(SMD타입)을 개발하였으며, 멀티미디어 고주파 능동필터의 카오프 주파수는 2.5 mHz, 이득은100 kHz에서 0.5d B, 통과대역 리플은 100 kHz에서 2 MHz까지 최고1.2dB, GDT는 100 kHz에서 2.0 MHz까지 최고 60 nsec이며, 감쇄는 3.7 MHz에서 최소 40dB임.

• 한국포장학회지
• /
• 제11권2호
• /
• pp.115-121
• /
• 2005

In this research, what megatrends will be derived for the future society and what new packaging technology will be required in the future were researched. Megatrends were researched in the five major categories, demographical, social, consumer, packaging related science and technology, governmental regulations and law trend. The six new packaging technologies were predicted, Active/Passive packaging technology, Intelligent Communication packaging technology, Nanotechnology packaging technology, Universal Convenience packaging technology, Environmental Friendly packaging technology, and Package Design technology.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2011

Active brazing of ceramic to metal is reviewed in this paper. As one of the key aspect in joint techniques, active brazing has been developed to simplify the manufacturing procedure of brazed joints between ceramic and metal. The active filler metal includes Ag-Cu-Ti series, Cu-Ti series, Co-Ti series and so on. The active filler metal which supplies the chemical bonds between ceramic and metal, enhances the wetting of filler metal on ceramic surface and eliminates the need for metallization treatments. The residual stress caused by difference of coefficient of thermal expansion between ceramic and metal, holds a direct influence on the bonding strength and even results in a fracture. Good joints of ceramic to metal promote the miniaturization and simplicity of electronic components with multifunction.

• 한국포장학회지
• /
• 제24권2호
• /
• pp.57-64
• /
• 2018

This article delves into the current status of various packaging technologies, which are currently being applied or are under development for the shelf-life extension and quality improvement of fresh and processed meat products. Traditional packaging methods include vacuum packaging, modified atmosphere packaging, and air-permeable packaging. Recently, innovative packaging methods have been introduced that utilize technologies such as barrier-films, active packaging, nanotechnology, microperforated films, far-infrared radiations, and plasma treatment. All of these packaging methods have their own merits and drawbacks in terms of shelf-life and quality maintenance. A right choice of packaging system for fresh and processed meat products must be made in accordance with the conditions of the raw material, storage, and distribution in the market and household, and while considering the environmental sustainability and consumer's expectations.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.81-86
• /
• 2001

The functions of food packaging are not only prevention from physical damage and loss during carrying and transportation, but also extension of shelf-life by adding antimicrobial substrate in packaging materials. Consumption of active packaging is gradually increasing. With different dosage of potassium sorbate(P.S.), the food preservative agent, antimicrobial papers were made by internal and external application of starch. The antimicrobial action of the paper was analyzed by the halo test and the shake flask method. The mechanical properties and strength were also measured. Antimicrobial papers adding P.S. showed higher values in tensile index than adding starch. The antimicrobial paper using starch showed similar microbe decreasing rate as that using P.S. Though microbe decreasing rate was 21.9%, it showed possibility to make antimicrobial paper using food preservative.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 추계 기술심포지움 논문집
• /
• pp.3-8
• /
• 2000

• 한국포장학회지
• /
• 제29권3호
• /
• pp.211-221
• /
• 2023

This study was conducted as a basic study for the selection of tags suitable for logistics management in the palletized unit-load unit and the development of various technologies to activate the palletized unit-load shipment of agricultural products through local APCs. Three types of passive RFID tags of UHF 900 MHz and one type of active RFID tag of 2.4 GHz band designed and manufactured through this study were used to analyze the receiving strength according to the tag's attachment location and distance of the palletized unit-load of agricultural products. In the passive RFID tag, there was a large difference in receiving strength by the tag's attachment location and a large amount of data loss depending on the distance within 30 m, whereas, in the active RFID tag, it was superior to the passive tags in terms of both receiving strength and data loss. Therefore, active tags are desirable from the perspective of multiple identification of warehouses with large spaces in relation to the application of RFID tags for palletized unit-loads of agricultural products, but the development of low-power technologies such as software wakeup power management as well as hardware to minimize battery power consumption is necessary.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.15-26
• /
• 2004

Pharmaceuticals require more detailed packaging than do other sensitive products, such as foods, although there are several similarities in their requirements. Because the required action of a medication can be nullified by any deterioration in its active principles the protection required from its packaging is at least an order of magnitude greater than that needed by foods. Therefore, security and integrity of the package are more important and are controlled by licensing arrangements. To achieve levels of safety, reliability, and quality, pharmaceutical firms must identify and correct potential problems with packaging functions. Purpose of this study is to identify the present issues pharmaceutical packaging and to forecast their future for the development of pharmaceutical packaging.