• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.198-201
• /
• 2000

We propose a method for analyzing the document structure. This method consists of two processes, segmentation and classification. The segmentation first divides a low resolution image, and then finely splits the original document image using projection profiles. The classification deterimines each segmented region as text, line, table or image. An experiment with 238 documents images shows that the segmentation accuracy is 99.1% and the classification accuracy is 97.3%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1025-1026
• /
• 2011

Monte Calrlo Simulation (MCS) and Sensitivity-based MCS (SMCS) are studied and compared in this paper. Quantitative analysis of the influence factors for reliability calculation accuracy is performed through a analytic function and finally applied to TEAM problem 22.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1031-1032
• /
• 2010

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.359-364
• /
• 2001

In this study, we try to improve the accuracy of QN-GPH by the help of simulation approach. We first establish an estimation method for GPH distributions with sufficient accuracy based on empirical distribution, and then perform a brief trial run to find appropriate empirical distributions. After getting GPH form of distributions, we continue the QN-GPH analytic steps and compute necessary performance measures. We apply the method to find sojourn time distributions in a 8-node queueing system and compare the results with the whole simulation and the original two-parametric approximation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.635-638
• /
• 1998

This paper proposes a simple method to measure system's performance in target tracking problems. Essentially employing the Cramer-Rao lower bound (CRLB) on trakcing accuracy, an algorithm of predicting system's performance under various scenarios is developed. The input data is a collection of measurements over time fromsensors embedded in gaussian noise. The target of interest may not maneuver over the processing time interval while the own ship observing platform may maneuver in an arbitrary fashion. Th eproposed approach is demonstrated and discussed through simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.61.6-61
• /
• 2001

In this paper, we propose a method to analyze measured data from 3D Laser tracking system and to enhance precision performance of a Cartesian robot. Position data are obtained over the stroke of a Cartesian robot with variable speeds. The measured data is need to model errors with several different sources. In general, the error is a function of part accuracy, assembly accuracy, temperature, and control etc. After the sources of errors are identified, they are used to enhance precision performance. The proposed method is more complete than others because we use very accurate 3D Laser tracking system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1175-1180
• /
• 1991

The purpose of this paper is to improve the matching accuracy in identifying corresponding points in the area-based matching for the processing of stereo vision. For the selection of window size, a new method is proposed based on frequency domain analysis. The effectiveness of the proposed method is confirmed through a series of experiments. To overcome disproportionate distortion in stereo image pair, a new matching method using the warped window is also proposed. In the algorithm, the window is warped according to imaging geometry. Experiments on a synthetic image show that the matching accuracy is improved by 14.1% and 4.2% over the rectangular window method and image warping method each.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.380-384
• /
• 1988

An optical device, named "T-MES", to measure the accuracy of printed scale of measuring tapes was developed. It has 11 optical sensors, that are exactly positioned every 100 mm on the 1 m frame. The sensors detect the beginning of the printed part and generate the puleses. The time difference between each signal pulse and the first sensor signal pulse is proportional to the error of printed scale. The measured data are trasmitted through a IEEE-488 interface to a IBM-AT computer and analyzed. The analysis software continuously displays the measured result on the CRT.n the CRT.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.942-945
• /
• 2001

Pulse electrochemical micromachining offers significant improvements in dimensional accuracy as compared with conventional electrochemical machining. One primary issue in pulse electrochemical micromachining is to identify and control machining depth as well as interelectrode gap size. This paper presents an identification method for the machining depth by in-process analysis of machining current and interelectrode gap size. The inter electrode gap characteristics, including pulse current, effective volumetric electrochemical equivalent and electrolyte conductivity variations, are analysed based on the model and experiments.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.42-53
• /
• 1993

이 논문에서는 정밀로봇 설계에 관한 여려 사안을 다루었다. 정밀로봇이란 미세한 오차와 정밀한 제어로 기존 로봇의 정밀도 향상을 위한 작고, 정밀한 운동범위를 갖춘 로봇이다. 원하는 운동범위나 효과적인 힘 전달률, 최소한 작은 힘으로의 동작을 수행하기 위한 최적의 기구학적 변수를 컴퓨터 시뮬레이션을 통하여 구현하고자 한다. CAD/CAM 시스템을 이용한 합성, 해석 및 제작을 위한 정보가 만들어질 수 있으며 최대 휨 및 응력해석을 통하여 최종적인 검증 및 설계 변경을 위한 자료로서 사용될 수 있을 것이다.