• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.20-26
• /
• 2023

Fiber-reinforced composite materials with carbon, glass, and aramid fibers are widely applied to industrial field structures due to their excellent properties. However, carbon fibers are vulnerable to external impacts, whereas aramid fibers degrade when exposed to water. This study evaluated carbon/aramid fiber composites degraded and damaged by high-temperature saline environments using acoustic emission (AE). The test specimen was molded using an autoclave and immersed in seawater at 70 ℃ for 224 days. In order to imitate the damage, a 3-mm-diameter hole was drilled using a diamond drill. Additionally, the specimen with the perforation was repaired by patch attachment processing. Three-point bending was used to conduct the flexural experiment, and an AE sensor with a 150-kHz resonance frequency was attached to evaluate the damage and the effect of patch attachment. AE accumulative counts obtained at the maximum load were 69.2, 67.1, and 91.2 for a high-temperature seawater deteriorated condition, a hole specimen, and a repaired patch specimen, respectively. Furthermore, the maximum amplitude of AE was detected at low values of 28 dB, 31.3 dB, and 30.3 dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.97-106
• /
• 1993

This is the study on fracture life under the interaction of creep and fatigue. It is difficult to explain the interaction of the creep and fatigue with indication of frequency but the dependency of the time should be considered. The formulation of material varieties causing by interaction of creep and fatigue is required in the accumulative damage method. The strain range partition method requires some of modification corresponding to the changes in temperature and load. All of other method also comprehended with above mentioned problems. Generally, in this field, the variety of stress-strain and suitable parameter is required and connective study between the macro and micro results seems to be insufficient. The linear damage rule is acquiring the support generally but it requires modification in the hgigh temperature instruments. The variety of stress effecting on crack and variety of stress on the metallurgical side are considered to be problems in the future days.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.493-498
• /
• 2014

The objective of this study was to make growth and yield models for common ice plant (Mesembryanthemum crystallinum L.) using expolinear functional equations in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-hours photoperiod were used, and the light intensity was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Nutrient film systems with three layers were used for plant growth. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Leaf area, shoot fresh and dry weights, light use efficiency of common ice plant as function of days after transplanting, accumulative temperature and accumulative radiation were analyzed. Leaf area, shoot fresh and dry weights per area were described using an expolinear equation. A linear relationship between shoot dry and fresh weights was observed. Light use efficiency of common ice plant was $3.3g{\cdot}MJ^{-1}$ at 30 days after transplanting. It is concluded that the expolinear growth model can be a useful tool for quantifying the growth and yield of common ice plant in a closed plant production system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.285-293
• /
• 2023

This study was conducted to determine the sowing limit period and predict growth in the northern region based on accumulative temperature for each growth stage of soybean cultivated in the southern regions of the Korean Peninsula. First, the results of a demonstration test in the central region (Yeoncheon) of the Korean Peninsula were very similar to the predicted and actual values on the date by growth stage obtained through cultivation. This method was then applied to seven agricultural climatic zones in the northern Korean Peninsula. The results predicted that regardless of ecotype, soybean could be grown and harvested in the southern and northern parts of Mt. Suyang, south of the East Sea, and in the central and northern inland areas. However, it was predicted that no ecotype could be grown and harvested normally in the northern alpine region. Furthermore, north of the East Sea, the prediction indicated that early and mid-maturing cultivars could be grown and harvested normally, but middle-late maturing cultivars appeared to lack the number of growth days. The sowing limit period also varied depending on the ecotype, although it was reached earlier as higher latitudes were approached; the period ranged from May 16 to June 26 in the northern and southern parts of Mt. Suyang, north and south of the East Sea, and central and northern inland areas. Furthermore, all ecotypes of the northern alpine region, as well as mid-late maturing cultivars in the north of the East Sea, were predicted to be unable to grow normally owing to the lack of number of days required for soybean growth and development.

• Korean Journal of Plant Resources
• /
• v.8 no.2
• /
• pp.183-188
• /
• 1995

This experiment was carried out to clarity the effect of summer softening cultivation on bud yield of Aralia continentalis Kita. Bulbous plant harvested on March 25 and stored in low temperature storage room($0-2^{\circ}C$) were transplanted in May, June, July and August. The bulbous plants were grown under black PE film and 50%(T-2250) silver shading nets. The results obtained are summerized as fallows. Harvesting time in Jul. and Aug. transplanting was 15days and was speeling 5days in May transplanting. The accumulative temperature of whole growth period was about $400^{\circ}C$. But yield of soft stems in June transplanting was 6.64(ton/ha), which was more than others. High temperature induced low-quality of soft stem in transplanting in July. Net income was 18000(1000won/ha) in transplanting in May or June.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.32-44
• /
• 1997

A three-dimensional (3D) full-dynamic damage model for ion implantation in crystalline silicon was proposed to calculate more accurately point defect distributions and ion-implanted concentration profiles during ion implantation process. The developed model was based on the physical monte carlo approach. This model was applied to simulate B and BF2 implantation. We compared our results for damage distributions with those of the analytical kinchin-pease approach. In our result, the point defect distributions obtained by our new model are less than those of kinchin-pease approach, and the vacancy distributions differ from the interstitial distributions. The vacancy concentrations are higher than the interstitial ones before 0.8 . Rp to the silicon surface, and after the 0.8 . Rp to the silicon bulk, the interstitial concentrations are revesrsely higher than the vacancy ones.The fully-dynamic damage model for the accumulative damage during ion implantation follows all of the trajectories of both ions and recoiled silicons and, concurrently, the cumulative damage effect on the ions and the recoiled silicons are considered dynamically by introducing the distributon probability of the point defect. In addition, the self-annealing effect of the vacancy-interstitial recombination during ion implantation at room temperature is considered, which resulted in the saturation level for the damage distribution.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.893-899
• /
• 2011

Fabrication of a complex aluminum alloy by the ARB process using dissimilar aluminum alloys has been carried out. Two-layer stack ARB was performed for up to six cycles at ambient temperature without a lubricant according to the conventional procedure. Dissimilar aluminum sheets of AA1050 and AA5052 with thickness of 1 mm were degreased and wire-brushed for the ARB process. The sheets were then stacked together and rolled to 50% reduction such that the thickness became 1 mm again. The sheet was then cut into two pieces of identical length and the same procedure was repeated for up to six cycles. A sound complex aluminum alloy sheet was successfully fabricated by the ARB process. The tensile strength increased as the number of ARB cycles was increased, reaching 298 MPa after 5 cycles, which is about 2.2 times that of the initial material. The average grain size was $24{\mu}m$ after 1 cycle, and became $1.8{\mu}m$ after 6 cycles.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.44-51
• /
• 1997

Crinding of stainless steel, aluminium alloy, copper alloy, and titanium alloy are difficult to obtain high quality finish, because they have the mechanical properties such as low hardness, high toughness. The low hardness and the high toughness result in the loading of wheel and the poor surface finish. In order to perform the grinding operations for these sorts of materials easily, the discontinuous grinding wheel wiht multi-porous grooves has been newly developed. The multi-porous grooves inthe discontinuous grinding wheel were formed during grinding wheel manufacturing process. In this paper, discontinuous grinding wheels having intermittent ratio 0.66, 0.81 and number of grooves 18,32 have been manufactured and grinding surface characteristics of these grinding wheels for SUS304 have been analyzed. Discontinuous grinding temperature according to intermittent ratiohas been also estimated by simulation. The discontinuous grinding wheels increase the grinding performance considerably. It is desirable to use the discontinuous grinding wheel in grinding the materials with high efficiency and accuracy.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.283-288
• /
• 2006

Characteristics of the rootstock formation and flower bud differentiation according to sowing time for production of the high quality rootstock in Chicory (Cichorium intybus L.) was investigated. The flower bud initiation was on the 17th of July after sowing in April, the 2nd of July after sowing in May, the 30th of July after sowing in June and the 1st of October after sowing in July. But they didn't differentiate after sowing in August and September. The days required from germination to flower bud initiation and accumulated temperature depended on the weather. If the outside air temperature was high, the days required were less, If the outside air temperature was low, the days required were greater, the accumulated temperature was similar to the days required in this experement, too. The rootstock sown from April to July wasn't good enough to be use because the flower bud differentiation was generated before harvestable weight. the weight of rootstock was sown in September wasn't heavy enough in weight because the outside air temperature was too low for it to grow well. The plant grows slow and steady through out winter. The rootstock sown in August was havestable 200g in 90 days after sowing before the flower bud differentiated. The best sowing time for the production of high quality rootstock of Chico in the climate of Korea is researched to be August.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.305-310
• /
• 2004

The development of Myzus persicae (Sulzer) was studied at temperatures ranging from 15 to $32.5^{\circ}C$ under $70{\pm}5\%$ RH, and a photoperiod of 16:8 (L:D). Mortality of 1st-2nd nymph was higher than that of 3rd-4th nymph at the most temperature ranges whereas at high temperature of $32.5^{\circ}C$, more 3-4nymph stage individuals died. The total developmental time ranged from 12.4 days at $15^{\circ}C$ to 4.9 days at $27.5^{\circ}C$, suggesting that higher the temperature, faster the development. However, at higher end temperature ranges of 30 and $32.5^{\circ}C$, the development took 5.0 and 6.3 days, respectively. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $4.9^{\circ}C$ and 116.5 day-degrees. The nonlinear shape of temperature related development was well described by the modified Sharpe and DeMichele model. When the normalized cumulative frequency distributions of developmental times for each life stage were fitted to the three-parameter Weibull function, attendance of shortened developmental times was apparent with pre-nymph, post-nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.87 and 0.94.