• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.95-101
• /
• 2009

The generator for gas turbine power generation consists of the rotor which generates magnetic field, the winding coil which is the path for the field current and the wedge and retaining ring which prevents the radial movement of the coil. Relatively severe deformation was observed at the coil end section during the inspection of the generator for peaking-load operation, and the thermal-electricity and the centrifugal force were evaluated by the simple modeling of the windings to find the cause. But the simulation stress was not sufficient to induce the coil plastic deformation. The analysis result seems to be applicable to the base-load generators which runs continuously without shut down up to a year, but there had been more deformation than simulated for the generator which is started up and shut down frequently. The cause of the coil deformation was the restriction of the expansion and shrinkage. The restriction occurs when the winding coil shrinks, and the stress overwhelms the yield stress and cause the plastic deformation. The deformation is accumulated during the start-ups and shut-downs and the thermal growth occurs. The factors which induce the coil restriction during the expansion and shrinkage should be reduced to prevent the unallowable deformation. The resolutions are cutting off the field current earlier during the generator shut-down, modifying the coil end section to remove the stress concentration and making the insulation plate inserted between the coil end section and the retaining ring have the constant thickness.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.10a
• /
• pp.133-138
• /
• 1991

The aim of the present paper is to develop a computer program predicting ultimate fracture strength of initially cracked structure under monotonically increasing external loads. For this purpose, two kinds of 3-D isoparametric solid elements, one 6-node wedge element and another 8-node brick element are formulated along the small deformation theory. Plasticity in the element is checked using von Mises' yield criterion. Elasto-plastic stiffness matrix of the element is calculated taking account of strain hardening effect. If the principal strain at crack tip which is one nodal point exceeds the critical strain dependin on the material property, crack tip is supposed to be opened and the crack tip node which was previously constrained in the direction perpendicular to the crack line is released. After that, the crack lay be propagated to the adjacent node. Once a crack tip node is fractured, the energy of the newly fractured node should be released which is to be absorbed by the remaining part. The accumulated reaction force which was carried by the newly fractured node so far is then applied in the opposite direction. During the action of crack tip relief force, since unloading may be occured in the plastic element, unloading check should be made. If a plastic element unloads, elastic stress-strain equation is used in the calculation of the stiffness matrix of the element, while for a loading element, elasto-plastic stress-strain equation is continuously used. Verification of the computer program is made comparing with the experimental results for center cracked panel subjected to uniform tensile load. Also some factors affecting ultimate fracture strength of initially cracked plate are investigated. It is concluded that the computer program developed here gives an accurate solution and becomes useful tool for predicting ultimate fracture load of initially cracked structural system under monotonically increasing external loads.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.35-44
• /
• 2014

In this study, the bio-phytoremediation and phytoremediation technologies were applied to the soils contaminated with total petroleum hydrocarbons (TPH) and heavy metals to evaluate the remediation efficacy from May 2012 to December 2013. Poplar (Populus bonatii Levl.) and Sun Hemp (Crotalaria juncea L.) were selected and planted in phytoremediation practice. These plants were also utilized in the bio-phytoremediation practice, with the addition of earthworm (Eisenia fetida) and petroleum-degrading bacteria (Pseudomonos sp. NKNU01). Furthermore, physiological characteristics, such as photosynthesis rate and maximal photochemical yield, of all testing plants were also measured in order to assess their health conditions and tolerance levels in adverse environment. After 20 months of remedial practice, the results showed that bio-phytoremediation practice had a higher rate of TPH removal efficacy at 30-60 cm depth soil than that of phytoremediation. However, inconsistent results were discovered while analyzing the soil at 100 cm depth. The study also showed that the removal efficiency of heavy metals was lower than that of TPH after remediation treatment. The results from test field tissue sample analysis revealed that more Zinc than Chromium was absorbed and accumulated by the tested plants. Plant height measurements of Poplar and Sun Hemp showed that there were insignificant differences of growth between the plants in remediation plots and those in the control plot. Physiological data of Poplar also suggested it has higher tolerance level toward the contaminated soils. These results indicated that the two testing plants were healthy and suitable for this remediation study.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.113-116
• /
• 2006

This study was carried out to investigate spectral irradiance characteristics of blue, yellow, and blue-black colored polyethylene (PE) shading net and the effect on growth characteristics and yield in ginseng seedling. The spectral irradiance $({\mu}mol/m^2/s/nm)$ showed the peak at 498 nm in both of blue and blue-black PE shading net, and 606 nm under yellow PE one. The intensity of blue light in blue shading was more strong than that of blue-black shading, control. Blue shading was increased by 17% and 23% in accumulated quantum for daytime, $0.5^{\circ}C and $0.2^{\circ}C$ in maximum temperature on June 2 than that of yellow and blue-black shading, respectively, but heat injury ratio of the former was lower than that of the latter. Chlorophyll content and stem length in blue shading were decreased more significantly than those of yellow and blue-black shading. The specific leaf weight was higher under blue and yellow shading than that of blue-black shading. Ginseng seedling harvested in blue shading was increased by $13{\sim}17%$ in the number of root, and $17{\sim}20%$ in root weight per $m^ 2 compared to yellow and blue-black shading owing to the increase of survived plant, and the decrease of specific leaf weight, heat injury ratio, and stem length.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.263-277
• /
• 2004

The purpose of this study is to analyze the characteristics of riverbed variation due to the sediment protection weir located on the estuary of the main stream of Taehwa river using I-D finite difference model, HEC-6 model, and the followings are the results of estimating sediment transport rate, amount of scour or deposition, and accumulated amount of deposit according to before and after of the sediment protection weir removal with various flow rates in the channel. Ackers-White transport function produced the greatest sediment transport rate while Meyer-Peter showed the smallest sediment transport rate at the most down stream area of the watershed through the sediment transport rate analyses for various flow rates according to the existence or nonexistence of the sediment protection weir. Toffaleti's and Colby transport function were closest to the average value, and the difference among the results of the sediment transport functions showed up to 8～9 times. Duboy's transport function produced the greatest riverbed variation while Toffaleti's showed the smallest variation through the riverbed variation analyses according to the existence or nonexistence of the sediment protection weir. Yang's was closest to the average value, and the difference among the results of the riverbed variation analyses ranged from 1.4 times to 11 times. It is thought that a sediment transport function must be selected very carefully with respect to the criteria of sediment yield estimation because the analysis results of the sediment transport rate and riverbed variation according to flow rates showed significant differences among the sediment transport functions, and the differences of sediment transport rate and riverbed variation according to the various sediment transport functions decreased as the flow rate increased.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1143-1153
• /
• 2016

Plant biomass, photosystem II (PSII) photochemical activity, photosynthetic function, and zinc (Zn) accumulation were investigated in a sorghum-sudangrass hybrid (Sorghum bicolor ${\times}$ S. sudanense) exposed to various Zn concentrations to determine the elimination capacity of Zn from soils. Plant growth and biomass of the sorghum-sudangrass hybrid decreased with increasing Zn concentration. Symptoms of Zn toxicity, i.e., withering and discoloration of old leaves, were found at Zn concentrations over 800 ppm. PSII photochemical activity, as indicated by the values of $F_v/F_m$ and $F_v/F_o$, decreased significantly three days after exposure to Zn concentrations of 800 ppm or more. Photosynthetic $CO_2$ fixation rate (A) was high between Zn concentrations of 100-200 ppm ($22.5{\mu}mol$ $CO_2{\cdot}m^{-2}{\cdot}s^{-1}$), but it declined as Zn concentration increased. At Zn concentrations of 800 and 1600 ppm, A was 14.1 and $1.8{\mu}mol$ $CO_2{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The patterns of stomatal conductance ($g_s$), transpiration rate (E), and water use efficiency (WUE) were all similar to that of photosynthetic $CO_2$ fixation rate, except for dark respiration ($R_d$), which showed an opposite pattern. Zn was accumulated in both above- and below-ground parts of plants, but was more in the below-ground parts. Magnesium (Mg) and iron (Fe) concentrations were significantly low in the leaves of plants, and symptoms of Mg or Fe deficiency, such as a decrease in the SPAD value, were found when plants were treated with Zn concentrations above 800 ppm. These results suggest that the sorghum-sudangrass hybrid is able to accumulate Zn to high level in plant body and eliminate it with its rapid growth and high biomass yield.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.2
• /
• pp.204-211
• /
• 2011

To yield high concentrations of protein expressed by genetically modified Escherichia coli, it is important that the bacterial strains are cultivated to high cell density in industrial bioprocesses. Since the expressed target protein is mostly accumulated inside the E. coli cells, the cellular product formation can be directly correlated to the bacterial biomass concentration. The typical way to determine this concentration is to sample offline. Such manual sampling, however, wastes time and is not efficient for acquiring direct feedback to control a fedbatch fermentation. An E. coli K12-derived strain was cultivated to high cell density in a pressurized stirred bioreactor on a pilot scale, by detecting biomass concentration online using a capacitance probe. This E. coli strain was grown in pure minimal medium using two carbon sources (glucose and glycerol). By applying exponential feeding profiles corresponding to a constant specific growth rate, the E. coli culture grew under carbon-limited conditions to minimize overflow metabolites. A high linearity was found between capacitance and biomass concentration, whereby up to 85 g/L dry cell weight was measured. To validate the viability of the culture, the oxygen transfer rate (OTR) was determined online, yielding maximum values of 0.69 mol/l/h and 0.98mol/l/h by using glucose and glycerol as carbon sources, respectively. Consequently, online monitoring of biomass using a capacitance probe provides direct and fast information about the viable E. coli biomass generated under aerobic fermentation conditions at elevated headspace pressures.

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.76-81
• /
• 1991

- The effect of redox potential (ORP) on lysine production by a leucine auxotrophic regulatory mutant of Corynebacterium glutclmicum on molasses medium was investigated in a 2-1 jar fermentor at pH 6.9 and $32^{\circ}C$. At a dilution rate of D=O.l $h ^1$, a maximum yield of Yr,,s=0.24 was obtained in either carbon- or leucine-limited chemostat where the redox potential was between -60 mV and - 100 mV. This level of redox potential corresponded to moderate oxygen deficiency. Under a high oxygen deficient condition of the redox potential of - 130 rnV (oxygen-limited chemostat), all the kinetic parameters such as $Y_[p/s}, q_s\; and \; q_p$ were decreased significantly and significant amounts of byproducts including glycine, alanine and valine were accumulated in the culture, indicating that the control of redox potential is important in lysine fermentation. At the redox potential of - 40 mV, on the other hand, large quantities of arginine (up to 0.38g/l) and glutamic acid (up to 0.12 g/l) were produced. A maximum lysine productivity of 2.41 g/l/h was achieved at - 66 mV under a carbon-limited condition.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.89-93
• /
• 2020

Complex warpage behavior of the electronic packages causes internal stress so many kinds of mechanical failure occur such as delamination or crack. Efforts to predict the warpage behavior accurately in order to prevent the decrease in yield have been approached from various aspects. For warpage prediction, silicon is generally treated as a homogeneous material, therefore it is described as showing no warpage behavior due to thermal loading. However, it was reported that warpage is actually caused by residual stress accumulated during grinding and polishing in order to make silicon wafer thinner, which make silicon wafer inhomogeneous through thickness direction. In this paper, warpage behavior of the single-side polished wafer at solder reflow temperature, the highest temperature in packaging processes, was measured using 3D digital image correlation (DIC) method. Mechanism was verified by measuring coefficient of thermal expansion (CTE) of both mirror-polished surface and rough surface.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.376-380
• /
• 2018

The astaxanthin recovery efficiencies were compared in acetonitrile, acetone, methanol, dichloromethane : methanol (1:3, v/v) and ethylacetate : ethanol (1:1, v/v) as a extraction solvent after the grinding of the H. pluvialis cells. The astaxanthin extraction yield in acetone was 1.13~1.29 times higher than other extraction solvents. It was also found that 96.7% of astaxanthin accumulated in H. pluvialis could be recovered by a single extraction. Since astaxanthin exists mainly as astaxanthin esters in H. pluvialis, a gradient reversed-phase HPLC analysis was carried out for the separation of astaxanthin esters from the extracts of H. pluvialis. Among the astaxanthin inside the H. pluvialis cell, free astaxanthin was 45.9% and astaxanthin esters were the rest.