• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.178-179
• /
• 2014

Corrosion is very serious problem in RC structure under ocean environment. There is no enough experiment information using the reinforced geo polymer concrete applied by electo chemical protection system. Three condition, such as tidal zone, submerged zone and crack were simulated to geo polymer specimen. Corrosion rate and natural electrode potential were measured through accelerated test. Anti corrosion property of geo polymer was better than OPC regardless of specimen condition and applied time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.217-222
• /
• 2000

A large Pc structure building is system that consisted of bearing wall and slab joint. It has general structure stability from unity thar each members tied at joint. The strength of mortar that packing in joint among panels is important to internal force in entire building system. Do, if we could get early strength estimation with microwave. It would bring good construction planning, reduce construction time, and judge building stability and so on. The purpose of this study is to develop early estimation method for making better quality control and constructing good PC panel structure. The results of this study were as follows :1) With sealed molds, reduced moisture volatilization to more than 60% and enlarged 30% accelerated compressive strength than before one. 2) To get more accelerated strength, we should control maximum temperature difference to $30^{\circ}C$ downward 3)Interrelation with 7-day and 28-day strength were 0.831,0.902, and it is above than before one

• 유공압시스템학회논문집
• /
• 제1권1호
• /
• pp.10-16
• /
• 2004

The failures such as leakage and burst stemmed from the repetitive motions of bending and stretching of the assembly of hydraulic hose in construction machines, agriculture machines, vehicles, and industrial heavy machines can induce big troubles. Therefore, the hydraulic hose itself eventually requires an estimation of life to operate the hydraulic system safely. In this research, we have qualitatively selected the efficient test items by the analysis of the life and potential failures of hydraulic hose. We have used more than seven of hydraulic hoses simultaneously for the research. We have applied impulse pressure and half omega flexing motions to the accelerated life testing Test results have been expressed by employing weibull plot.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• 콘크리트학회지
• /
• 제22권6호
• /
• pp.71-76
• /
• 2010

• 한국강구조학회 논문집
• /
• 제20권2호
• /
• pp.313-321
• /
• 2008

최근 일본에서 하로식 트러스교의 콘크리트 상판을 관통하는 사재가 콘크리트 상판의 상부 또는 하부에서 심한 부식손상 에 의해 파단 된 사례가 보고되었다. 이는 도장막의 노화에 따른 콘크리트와의 경계부에 있어 사재의 국부부식에 기인한 것으로 추정되고 있다. 그러므로 이와 같이 콘크리트와 강재의 경계부에 있어서의 국부 부식손상 대책수립 및 이를 기점으로 발생될 수 있는 피로손상에 대한 검토가 필요하다. 본 실험에서는 인장시험편에 부분적으로 콘크리트 블록을 설치한 콘크리트-강재의 모델시험체에 대한 부식환경촉진실험을 실시하여, 경계부의 부식감소량을 측정하였으며, 부식실험 후의 모델시험체를 이용한 피로실험을 실시하였다. 부식촉진실험의 조건으로는 실제대기환경에의 적용성이 검토된 S6사이클(JIS K5621)을 사용하였으며, 부식촉진실험기간은 150일, 300일, 450일, 600일로 각 5개의 모델시험체를 사용하였다. 부식촉진실험결과를 근거로 실험기간에 따른 최대 및 평균 부식깊이를 정량화하였으며, 부식실험 후의 부식 손상된 모델시험체의 피로실험결과를 근거로 실험기간의 증가에 따른 피로강도 감소량을 명확히 하였다.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.203-208
• /
• 2016

본 논문에서는 침지내 환경을 재현한 철근부식촉진시험과 장기폭로시험을 실시하였다. 환경조건을 변수로 시험을 실시하였으며, 반전지전위법을 통한 철근부식 모니터링을 실시하였다. 부식촉진 시험결과 시험조건 별 상관계수 도출을 할 수 있었다. 촉진시험은 온도조건에 따라 인공해수의 온도가 $20^{\circ}C$인 case 1과 $65^{\circ}C$인 case 2로 구분하여 실시하였다. 고온 조건인 case 2가 1.7~1.8배 정도 상온조건인 case 1에 비해 부식을 촉진시키는 것으로 나타났으며, 해양환경시험장에서의 장기폭로시험결과와의 비교를 통해 case 1의 경우 2.45~2.94의 상관계수를 case 2의 경우 4.37~4.99의 상관계수를 나타내었다.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1375-1386
• /
• 2006

In life testing, the lifetimes of test units under the usual conditions are so long that life testing at usual conditions is impractical. Testing units are subjected to conditions of high stress to yield informations quickly. In this paper, the inferences of parameters on the three step-stress accelerated life testing are studied. The two-parameter exponential distribution with a failure rate function that a log-quadratic function of stress and the tempered failure rate model are considered. We obtain the maximum likelihood estimators of the model parameters and their confidence regions. A numerical example will be given to illustrate the proposed inferential procedures.

• Steel and Composite Structures
• /
• 제14권3호
• /
• pp.229-242
• /
• 2013

Corrosion is important reason for the deterioration of the bond between reinforcing steel and the surrounding concrete. Corrosion of the steel mainly depends on its microstructure. Smooth S220, ribbed S420 and S500 grade reinforcing steels were used in the experiments. Samples were subjected to accelerated corrosion. Pullout tests were carried out to evaluate the effects of corrosion on bond strength of the specimens. S500 grade steel which has tempered martensite microstructure showed lower corrosion rate in concrete than S220 and S420 steels which have ferrite+perlite microstructure. S500 grade steel showed highest bond strength among the other steel grades in concrete. Bond strength between reinforcing steel and concrete increased with increase in the strength of steel and concrete. It also depends on whether reinforcing bar is ribbed or not.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권4호
• /
• pp.291-302
• /
• 2009

Accelerated and field degradation tests are performed for reliability assessment of an anticorrosive paint for steel structures. Test data were analyzed to obtain the degradation model and the life time distributions of the paint. A power law degradation model and lognormal performance distribution were used to predict the lifetime of the anticorrosive paint and the method of finding an acceleration factor is provided.