• 한국재료학회지
• /
• 제12권5호
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.287-295
• /
• 2013

PURPOSE. This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS. Specimens (N=180) were prepared out of three different denture base resins (Rodex, cross-linked denture base acrylic resin; Paladent, heat-cured acrylic resin; Deflex, Polyamide resin) ($75mm{\times}25mm{\times}3mm$). A silicon-based soft denture liner (Molloplast B) was applied to the denture resins after the following conditioning methods: a) Air-abrasion ($50{\mu}m$), b) Er,Cr:YSGG laser (Waterlase MD Turbo, Biolase Technology) at 2 W-20 Hz, c) Er,Cr:YSGG laser at 2 W-30 Hz, d) Er,Cr:YSGG laser at 3 W-20 Hz, e) Er,Cr:YSGG laser at 3 W-30 Hz. Non-conditioned group acted as the control group. Peel test was performed in a universal testing machine. Failure modes were evaluated visually. Data were analyzed using two-way ANOVA and Tukey's test (${\alpha}$=.05). RESULTS. Denture liner tested showed increased peel strength after laser treatment with different parameters ($3.9{\pm}0.4-5.58{\pm}0.6$ MPa) compared to the control ($3.64{\pm}0.5-4.58{\pm}0.5$ MPa) and air-abraded groups ($3.1{\pm}0.6-4.46{\pm}0.3$ MPa), but the results were not statistically significant except for Paladent, with the pretreatment of Er,Cr:YSGG laser at 3 W-20 Hz. Polyamide resin after air-abrasion showed significantly lower peel strength than those of other groups ($3.1{\pm}0.6$ MPa). CONCLUSION. Heat-cured acrylic resin, PMMA, may benefit from Er,Cr:YSGG laser treatment at 3 W-20 Hz irradiation. Air-abrasion of polyamide resins should be avoided not to impair their peel bond strengths to silicon-based soft denture liners.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.172-183
• /
• 2002

This study is going to compare the degree of color change which occurs in the following two cases of the factors which cause the color change of extra-staining, one is during glazing by the dental technician, the other is tooth brush abrasion which makes the biggest influence on color change. To compare the degree of color change before and after glazing, a sample was made with vintage incisal porcelain No. 59 OPAL(Shofu Inc, Japan), after that it was painted with three colors of porcelain stainers, then the degree of color was measured with a spectrophometer(Model Chromaview 300, Spectoron Tech Co. Korea) after it had been treated with firing only and glazing after firing 40,000-cycle and 80,000-cycle of tooth brush abrasion test were carried out in order to simulate the brushing effect of 4 years and 8 years by using the abrasion tester. The colors were measured before the test, and after the 40,000-cycle and 80.000-cycle operations and the surfaces were examined by SEM. The results of this study were as follows ; 1. The color change before and after glazing was not great enough to have a clinical significance but the orange color was changed more significantly statistically than the blue and light brown(p<0.05). 2. In the case of the color change of stained porcelain by tooth brushing, carrying out staining and glazing with two-times firings resulted in statically less color change than one firing only(p<0.05). 3. In the case of the difference in the stainer's color, the orange color which has higher chroma was statically more sensitive than the blue color(p<0.05) 4. In the case of the color change after the 80,000-cycle abrasion, all showed color change when there was one firing and the orange stainer showed some color change with clinical significance when firings were done two times.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.145-150
• /
• 2014

This study investigates the preparation of anti-reflective (AR) coating film to improve the efficiency of solar cell. The AR coating film was successfully obtained by dip-coating with AR coatings prepared by sol-gel method. Fluoroalkylsilane was additionally introduced into the coatings to give the self-cleaning effect of AR coating film. We performed the abrasion test, pencil scratch hardness test and cross-cut test to identify the mechanical strength of AR coating film. As the results, the transmittance of AR coating films with 9.07, 18.13 and 27.20 of IPA/MTMS molar ratios were 93.1, 93.6 and 95.3%, respectively. The water contact angle and transmittance of AR coating film increased by the introduction of hydrophobicity. The prepared AR coating film shows the high level of abrasion, hardness and adhesion. The IPA/MTMS molar ratio of 27.20 and the withdrawing speed range of 0.20 ~ 0.28cm/sec are the optimal coating condition in terms of the transmittance and mechanical strength of AR coating film.

• 농촌계획
• /
• 제11권3호
• /
• pp.53-57
• /
• 2005

Up to recently building are constructed focusing on the convenience of residential condition. However, environmental-friendly materials is required for construction as people are spending more time inside buildings and causes of many problems like sick-building syndrome are known due to the noxious gases and polluted air originated from construction materials. Although loess(hwangtoh) is an environmental-friendly material, it has limitations in compressive strength far a construction material. The purpose of this study is to suggest the optimal ratio of loess(hwangtoh) mortar by tests of compressive strength comparing with standard strength of floor finishing mortar and evaluate the usability of loess(hwangtoh) mortar for floor finishing material through an impact test, a cracking test and a abrasion test. Based on the results of this study, 86% of loess(hwangtoh) and 14% of inorganic binder is suggested for the optimal mixture ratio of loess(hwangtoh) mortar. Moreover, the characteristics of loess(hwangtoh) is suitable for floor finishing material in impact, crack, abrasion.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.149-154
• /
• 2014

실리카와 카본블랙을 함유한 SBR 배합고무를 대상으로 마찰 및 마모거동을 조사하였다. 인열에너지 이론을 배경으로 설계된 칼날형 마모시험기를 이용하였으며 마찰일의 크기가 SBR 배합고무의 마모속도에 미치는 영향을 평가하였다. 마찰일이 증가할수록 마모속도가 증가하는 power law관계를 확인하였다. 칼날형 마모시험기를 통해 기존의 간헐적 마모손실무게 측정 대신 연속적 마모이동거리 측정이 가능했으며 보다 정확한 마모속도를 결정할 수 있었다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.118-128
• /
• 2001

본 연구에서는 치경부의 심미수복에 이용되고 있는 7종의 재료를 시험재료로 선택한 다음 잇솔질이 이들 수복재료의 마모도에 미치는 영향을 평가하기 위해 전동식 마모시험기를 이용하여 잇솔질 하중 2.0N으로 100,000회의 잇솔질을 시행한 다음 각 시편의 평균 두께 감소와 표면조도를 측정하였고, 표면경도가 연마성 마모에 미치는 영향을 평가하기 위해 누프 경도를 측정한 결과, 다음과 같은 결론을 얻었다. 1. 누프 경도값은 F2000 군에서 79.7로 가장 높고 Heliomolar 군에서 20.0으로 가장 낮은 값을 보였으며, Tukey 다중범위검증법에 의해서 각 군 사이의 통계적 유의성을 검증한 결과 Compoglass 군과 Dyract AP 군을 제외 한 모든 군들 사이에서 상호간에 유의 한 차이를 보였다(p<0.05). 2. 표면조도는 Improved Fuji II LC 군에서 가장 높고 UniFil F군에서 가장 낮게 나타났으며, Tukey 다중범위검증법에 의해서 각 군사이의 통계적 유의성을 검증한 결과, Improved Fuji II LC군, F2000 군과 UniFil F군 사이에서만 상호간에 유의한 차이를 보였다(p<0.05). 3. 표면조도와 마모도는 치약으로 유치용의 겔 형 페이스트인 Tom & Jerry를 사용한 경우보다 성인용의 페이스트인 Perio $A^+$를 사용한 경우에 높게 나타났다(p<0.05). 4. 연마면에서는 기질레진의 선택적인 마모에 의한 필러의 돌출로 인해 표면조도가 증가된 양상이 관찰되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.418-423
• /
• 2012

원통형 단판적층재(LVL)의 구조재 이외의 공예재 등의 용도개발을 위하여 원통형 단판적층재의 내수접착성과 도장처리에 따른 내마모성 및 표면경도를 측정하였다. 레조시놀 수지와 경화제(paraformaldehyde)를 100 : 5의 혼합비로 하여 접착 경화한 원통형 단판적층재의 전체적인 접착층에 대한 삶음박리 접착력은 양호한 편이었다. 내마모성은 횡단면이 접선단면보다 상대적으로 우수하였으며, 접선단면에 자외선 차단 오일을 도장 처리한 경우 내마모성이 향상되었다. 표면경도는 횡단면의 경우, 낙엽송 중심재가 라디에타소나무 단판적층 부위보다 높았고, 접선단면의 경우에는 접착층 부위가 단판부위보다 높게 나타났다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.