최근 탄소섬유, 유리섬유 등 보강재의 사용이 증가함에 따라 내구성저하의 원인이 될 수 있는 콘크리트와 보강재 사이의 박리탐사 필요성이 대두된다. 본 연구에서는 중심주파수가 15 GHz이고, 대역폭이 10 GHz인 horn antenna 를 이용하여, 탄소섬유 및 유리섬유시트 보강 콘크리트 박리를 탐사하는 실험을 실시하였다. 실험에 사용된 시편은 길이 $600\;{\times}$ 폭 $600\;{\times}$ 두께 100 mm 의 크기를 가지며, 그 표면에 1.5 mm 두께의 탄소섬유 유리섬유를 에폭시로 부착하였다. 또한, 시편의 중앙에 길이 $50\;mm\;{\times}$ 폭 50 mm 크기의 박리를 콘크리트 표면 밑에 각각 두께 2, 4, 6 mm로 만들어 매립하였고, 콘크리트 표면 위에 2 mm 두께로 만들어, 인공박리를 제작하였다. 제작된 시편은 섬유의 종류에 따라 각각 4종류씩 총 8개의 시편이 제작되었다. 실험 결과는 그래프의 면적차이를 이용한 결과처리방법으로 처리하였고, 실험 결과 탄소섬유와 유리섬유시편에 매립된 인공 박리를 찾아내어, 향후 콘크리트/보강재 박리탐사시스템 개발에 도움이 되는 자료를 제공할 것이다.
무선 LAN 대역에서 동작하는 이중 적층 상부덮개를 적용한 고이득 원형편파 패치 안테나를 제안한다. 상부덮개는 단위 셀을 주기적으로 배열하는 구조를 갖고, 패치안테나 위에 일정한 높이의 공기층을 두고 배치된다. 제안된 안테나는 최대 9.59dBi의 안테나 이득을 얻을 수 있는데 이는 패치안테나만 있는 경우에 비해 6.48dB 향상된 결과이다. 또한, 제안된 안테나는 높은 안테나 이득을 유지하면서 3dB 이하의 낮은 축비를 갖는데 이는 패치안테나의 원형 편파 특성이 잘 유지됨을 의미한다. $4{\times}4$ 배열구조를 갖는 상부덮개와 패치안테나 간의 공기층 높이는 25mm에서 최적이고, 이는 2.45GHz 주파수에서 대략 $0.2{\lambda}$에 해당된다. 결과적으로 상부덮개를 이중으로 적층함으로써 유효 개구면 크기가 증가되고, 이에 따라 패치안테나의 이득이 향상됨을 확인하였다.
최근의 이동통신 트래픽의 증가 수요에 대처하기 위한 10 GHz 이상의 M/W(microwave) 이동통신용 단거리 백홀을 설계하기 위해서는 구축지점에서의 강우 페이드에 의한 감쇠와 어스 벌지 및 프레넬 존 등 지형적 대기조건을 종합적으로 고려해야 한다. 이에 본 논문에서는 국내 강우강도 표준 값을 이용하여 여러 주파수 대역에서 경로길이를 이론적으로 계산하고, SMIS (spectrum management intelligence system)를 활용한 대도심의 전파경로 프로파일을 분석한다. 이 결과를 토대로 해외의 최소 경로길이 기준과 비교분석을 행해 현재 모든 주파수에 대해 10 km로 정하고 있는 국내 기준 값을 주파수 대역별로 세분화하여 최소 경로길이를 제시한다. 본 논문의 결과는 국내 도시에서의 이동통신용 M/W 백홀 설계의 기본 데이터를 제공하여 고주파수 대역의 단거리 광대역 이동통신 백홀용으로 주파수의 유효이용을 촉진시키는데 유용하게 활용될 것이다.
$ZrTiO_4$ dielectric thin films were coated by metal-organic decomposition, and annealed by rapid thermal processing up to $900^{\circ}C$ for their crytallization. Crystallized single-phase $ZrTiO_4$ thin films were fabricated above the annealing temperature of $800^{\circ}C$, but their grains were randomly oriented without specific textured orientation. Best dielectric properties were presented by the sample annealed at $800^{\circ}C$ which had crystalline structure and flat surface. Dielectric constant of the film was maintained at 32 throughout full frequency range up to 6 GHz, and dielectric loss was varied between 0.01 and 0.04.
Effects of sintering temperature and time on relative permittivity $\varepsilon$$\_$r/, unloaded quality factor Q$.$f and temperature coefficient of resonant frequency $\tau$$\_$f/ of dielectric resonator materials produced from commercial ZST powder were investigated in some detail. Q$.$f values, as determined from cavity perturbation method at 1.6 GHz, gradually increased with sintering temperature reaching the maximum at 1420$^{\circ}C$. However, bulk density and relative permittivity values, which increased with temperature, started to decrease above 1380$^{\circ}C$. In addition, Q$.$f values slightly increased with sintering time at the sintering temperature of 1300$^{\circ}C$∼1380$^{\circ}C$, while bulk density and relative permittivity values were approximately constant. It was also found that $\tau$$\_$f/ values were not affected by sintering temperature and time within the experimental conditions used.
본 논문에서는 구형 빔 패턴 형성을 위한 다층 이차원 원형 도체 배열을 갖는 새로운 방사 구조를 제안하였다. 새로운 방사 구조는 방사 원형 도파관 위에 유한하게 적층된 원형 도체 배열 소자들이 무한적, 주기적 평면 배열 구조를 갖는다. 이론적 해석은 rigid full-wave 해석 방법으로 배열 구조의 각 영역에서의 전자장에 대한 모드 전개식과 원형 도체상의 전류에 대한 모드 전개식에 바탕을 두고 상세히 수행되었으며, 함수의 직교성, 모드 정합 방법, 경계조건 그리고 Galerkin 방법을 사용하여 선형 대수 방정식 시스템을 유도하였다. 또한, Gauss 소거법을 사용하여 배열 특성 계산에 필요한 미지의 진폭 계수들을 얻었다. 제안된 알고리듬은 Ka대역에서 $\pm$20$^{\circ}$의 빔 폭을 갖는 구형 빔 패턴 형성을 위한 배열 설계에 사용되었으며, 일반적인 응용을 위해 파장으로 정규화된 최적화 설계 변수들을 제시하였다. 시뮬레이션 결과와 실험 결과들을 서로 비교하기 위해, 대칭적으로 19개의 방사 소자를 갖는 Ka 대역 실험 시제품을 제작하였다. 방사 원형 도파관 개구면 위에 적층된 원형 도체 배열 구조는 얇은 필름상에 이온-빔 증착 방법을 사용하여 구현되었다. 계산된 단위소자 패턴들과 시제품의 측정된 단위소자 패턴들은 빔 스캔 범위 내에서 거의 일치함을 보여주었으며, 사이드 로브 레벨과 그레이팅 로브 레벨에 대한 결과 분석도 이루어졌다 또한, 정 방향에서 다층 원형 도체 구조에 의해 생길 수 있는 blindness 현상에 대하여 언급하였다. 제작된 시제품의 입력 VSWR은 1.14 보다 작았으며, 29.0 GHz, 29.5 GHz 그리고 30 GHz에서 측정된 이득은 각각 10.2 dB, 10.0 dB 그리고 10.7 dB 였다. 실험 및 시뮬레이션 결과들은 제안된 다층 원형 도체 배열 구조가 효율적인 구형 빔 패턴을 형성할 수 있음을 보여 주었다.능성을 시도하였고, 그 결과는 다음과 같다. 1. Cholesterol을 제거한 cheese의 제조에서 최적조건은 균질압력 1200psi(70kg$cm^2$), 균질온도 $70^{\circ}$, $\beta$-cyclodextrin 첨가량 2%였으며, 이때 우유의 cholesterol의 제거율이 86.05%로 가장 높게 나타났다. 2. Cholesterol을 제거한 cheese들의 수율은 모두 12.53%(control 10.54%) 이상으로 균질 처리가 cheese의 수율을 18.88%이상 향상시키는 것으로 나타났다. 3. 유지방 함량 23.80%인 control 치즈의 cholesterol 함량은 81.47mg/100g이었고, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%를 첨가한 cheese에서는 cholesterol 함량이 20.15mg/100g으로 cholesterol 제거율이 75.27%로 가장 높게 나타났다. 4. Meltability는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서 2.25cm(control 3.34cm)로 가장 낮았으며, 균질압력이 증가할수록 meltability가 감소하여 치즈의 품질을 저하시켰다. 5. Control 치즈의 stretchability는 30cm 이상 늘어나 가장 양호한 수치인 5점을 나타낸 반면, cholesterol을 제거한 cheese에서는 5~10cm 사이를 나타내어 2점으로 stretchability가 저하된 것을 볼 수 있었다. 6. Oiling off는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서
본 논문에서는 임의의 고조파 임피던스를 갖는 출력 정합 회로를 이용한 GaN HEMT 전력증폭기의 설계를 보였다. 선정된 GaN HEMT 소자는 TriQuint사의 TGF2023-02이며, 전력증폭기 구성을 위하여 상용 패키지에 패키징하였다. 패키지 입 출력 기준면에서 로드-풀 시뮬레이션을 수행하였다. 기본파에서는 최대 출력, 2차 및 3차 고조파에서는 최대 효율을 갖는 최적 임피던스를 도출하였다. 도출된 임피던스는 fixture에 의하여 임의의 고조파 임피던스를 보였으며, 이를 정합하기 위하여 4개의 전송선으로 구성된 출력 정합 회로를 제안하였다. 최적 임피던스를 정합하기 위한 전송선의 특성 임피던스와 전기각을 수학적으로 도출하였다. 제안된 출력 정합회로를 PCB상에 구현하여 전력증폭기를 제작하였다. 제작된 전력증폭기는 $54.6{\times}40mm^2$의 크기를 가지며, 2.5 GHz에서 8 W 이상의 출력을 보이고, 8 W 출력에서 효율 55 % 이상, 그리고 2차 및 3차 고조파는 모두 35 dBc 이상의 특성을 보였다.
Carbon nanotubes were synthesized at various conditions using Ni-catalytic thermal chemical vapor deposition method and their characteristic properties were investigated by SEM, TEM and Raman spectroscopy. Carbon nanotubes were formed on very fine Ni-catalytic particles. The carbon nanotubes synthesized by thermal decomposition of acetylene at $700^{\circ}C$ had a coiled shape, while those synthesized at $850^{\circ}C$ showed a curved and Y-shape having a bamboo-like morphology. It was found that the carbon nanotube was also made on the fine Ni-catalytic particles formed on the surface of 100~400nm sized large ones after pretreatment with $NH_3$.ber composites show the high dielectric constant and large conduction loss which is increased with anisotropy of fiber arrangement. It is, therefore, proposed that the glass and carbon fiber composites can be used as the impedance transformer (surface layer) and microwave reflector, respectively. By inserting the foam core or honeycomb core (which can be treated as an air layer) between glass and carbon fiber composites, microwave absorption above 10 dB (90% absorbance) in 4-12 GHz can be obtained. The proposed fiber composites laminates with sandwitch structure have high potential as lightweight and high strength microwave absorbers.
Since the most of the mal-functions in the industrial equipments controlled by processors have been occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commision(IEC) prepare the dummy signal to test the immunity level of the equipments controlled by processors and recommend it for the measuring. In this paper, the defined dummy EFT signal by IEC are analyzed by the spectrum analyzer in the frequency domain and studied the developed countermeasuring parts. The new developed parts are consist of the feedthrough capacitors ( $C_y$ type ) in the input and materials with high permeaility which was wound or inserted in the second layer of the Power Cable in order to increase Common Mode inductance. And it is compared inserted Permalloy to material with high permeability increasing Common Mode inductance. We could gotten a excellent insertion loss on the wide band against EFT signal. Especially, we confirm that countermeasuring Power Cable have been an excellent dynamic characteristics in computer system above the 3.6Kv. This new parts could be effectively used for industrial, MIL, and medical equipments to reduce a mal-functions on the site. Furthermore, these parts also have a good characteristics for EMI countermeasuring over the 60MHz up to several GHz band, they are also expected to be used for all kind of EMS test with IEC801-2, 3, 5 and 6 on the power distributed line.
In order to develop a tunable resonator which can be easily operated by DC bias and applied for microwave tunable filters and devices using ferroelectric thin or thick films, the non conductor backed-and conductor backed- coplanar stripline resonators have been designed and analyzed. They have been designed to be operated at 25 GHz which involve coplanar stripline input and output ports. The resonators have been simulated and analyzed using Ansoft HFSS. The research has been focused on the Quality factor of the coplanar stripline resonator. The conductor Q, box Q, and radiation Q of the resonators have been analyzed and calculated according to the substrate thickness & conductor width of the resonators. From these parameters, the loss factors of the coplanar stripline resonator have been investigated. The conducting Q of the coplanar stripline resonator has no relation with the thickness of dielectric substrate and increases as the conductor width increases. The box Q has no much relation with the thickness of substrate and the conductor width, which is above 2000. The radiation loss increases as the thickness of substrate and the conductor width increase. To decrease the radiation loss of the coplanar stripline resonator, a conductor backed coplanar stripline resonator has been proposed which has the unloaded Q of 170.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.