• Communications of the Korean Mathematical Society
• /
• v.9 no.3
• /
• pp.753-765
• /
• 1994

The linearly constrained quadratic programming(QP) considered is : $$ min f(x) = c^T x + \frac{1}{2}x^T Hx $$ $$ (1) subject to A^T x \geq b,$$ where $c,x \in R^n, b \in R^m, H \in R^{n \times n)}$, symmetric, and $A \in R^{n \times n}$. If there are bounds on x, these are included in the matrix $A^T$. The Hessian matrix H may be positive definite or negative semi-difinite. For large problems H and the constraint matrix A are assumed to be sparse.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.459-459
• /
• 2012

Recently, the discharge of global warming gases in dry etching process of TFT-LCD display industry is a serious issue because perfluorocarbon compound (PFC) gas causes global warming effects. PFCs including CF4, C2F6, C3F8, CHF3, NF3 and SF6 are widely used as etching and cleaning gases. In particular, the SF6 gas is chemically stable compounds. However, these gases have large global warming potential (GWP100 = 24,900) and lifetime (3,200). In this work, we chose C3F6O gas which has a very low GWP (GWP100 = <100) and lifetime (< 1) as a replacement gas. This study investigated the effects of the gas flow ratio of C3F6O/O2 and process pressure in dual-frequency capacitively coupled plasma (CCP) etcher on global warming effects. Also, we compared global warming effects of C3F6O gas with those of SF6 gas during dry etching of a patterned positive type photo-resist/silicon nitride/glass substrate. The etch rate measurements and emission of by-products were analyzed by scanning electron Microscopy (SEM; HITACI, S-3500H) and Fourier transform infrared spectroscopy (FT-IR; MIDAC, I2000), respectively. Calculation of MMTCE (million metric ton carbon equivalents) based on the emitted by-products were performed during etching by controlling various process parameters. The evaluation procedure and results will be discussed in detail.

• Journal of the Korean Mathematical Society
• /
• v.42 no.1
• /
• pp.111-127
• /
• 2005

Let B and S be the unit ball and the unit sphere in $\mathbb{C}^n$, respectively. Let ${\sigma}$ be the normalized Lebesgue measure on S. Define the Privalov spaces $N^P(B)\;(1\;<\;p\;<\;{\infty})$ by $$N^P(B)\;=\;\{\;f\;{\in}\;H(B) : \sup_{0 where H(B) is the space of all holomorphic functions in B. Let ${\varphi}$ be a holomorphic self-map of B. Let ${\mu}$ denote the pull-back measure ${\sigma}o({\varphi}^{\ast})^{-1}$. In this paper, we prove that the composition operator $C_{\varphi}$ is metrically bounded on $N^P$(B) if and only if ${\mu}(S(\zeta,\delta)){\le}C{\delta}^n$ for some constant C and $C_{\varphi}$ is metrically compact on $N^P(B)$ if and only if ${\mu}(S(\zeta,\delta))=o({\delta}^n)$ as ${\delta}\;{\downarrow}\;0$ uniformly in ${\zeta}\;\in\;S. Our results are an analogous results for Mac Cluer's Carleson-measure criterion for the boundedness or compactness of $C_{\varphi}$ on the Hardy spaces $H^P(B)$.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.171-176
• /
• 2003

Productivity of biosurfactant (rhamnolipid) by Pseudomonas aeuginosa F722 was investigated in the several culture conditions and culture composition. Biosurfactant production by P. aeuginosa F722 was amounted to 0.78 g/l as the result of the nitrogen sources and carbon sources without investing of optimum conditions. As for that one was investigated, biosurfactant production by P. aeruginosa F722 was amounted to 1.66 g/l. Biosurfactant production increased twofold because the composition of a modified C-medium was investigated efficiently. $NE_4$Cl or $NaNO_2$ inorganic nitrogens and yeast extract or trypton organic nitrogens were effective, but others inorganic nitrogens and organic nitrogens tested were not efficient far biosurfactant production by P. aeruginosa F722. The optimum concentration of $NH_4$Cl; inorganic nitrogen and yeast extract; organic nitrogen were 0.05% and 0.1%, respectively. In various carbon sources, others with the exception of hydrophobic property substrate (n-alkane) and hydrophilic property substrate (glucose, glycol) were not found to be effective fur biosurfactant production, and 3.0% was better in yield than other concentration of glucose. This yielded C-to-N ratios between 17 and 20. In our experiment, the highest biosurfactant production by P. aeruginosa F722 were observed in 5 days cultivation, containing glucose 3.0%, $NH_4$Cl 0.05%, and yeast extract 0.1% and C-to-N ratio was 20. Optimal pH and temperature for biosurfactant production were 7.0 and $35^{\circ}C$, respectively. Under the optimal culture conditions with glucose, biosurfactant production was amounted to 1.66 g/l. Velocity of biosurfactant production and strain growth increased after nitrogen depletion. The average surface tension of 30 mN/m after the 3 days of incubation under optimal culture condition was measured by ring tensionmeter.

• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.391-396
• /
• 2009

The biological effects of carcinogenic polycyclic aromatic hydrocarbons (cPAHs) including benzo[a]pyrene (BaP), dibenzo[a,h]anthracene (DBA), benzo[a]anthracene (BaA), benzo[b] fluoranthene (BbF), benzo[k]fluoranthene (BkF), and indeno[1,2,3-c, d]pyrene (InP) on transcriptomic changes were determined in the liver of Oryzias latipes. Differentially expressed genes (DEGs) by binary exposure to cPAHs (BaP+BaA, BaP+BbF, BaP+BkF, BaP+DbA, BaP+InP) were screened by annealing control primers-based polymerase chain reaction followed by sequence analysis and BLAST searching. The results showed that four DEGs were commonly expressed by cPAHs and they were identified as ribosomal protein S4, coagulation factor II, elongation factor 1 beta, and a predicted protein similar to human immunodeficiency virus type I enhancer binding protein 3. This finding suggests that binary exposure to cPAHs interferes protein synthesis required for fundamental liver functions in fish.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.453-458
• /
• 2014

SiC and its composites have been considered for use as nuclear fuel cladding materials of pressurized light water reactors. In this study, a $SiC_f$/SiC composite as a constituent layer of SiC triplex fuel cladding was fabricated using a chemical vapor infiltration (CVI) process in which tubular SiC fiber preforms were prepared using a filament winding method. To enhance the matrix density of the composite layer, winding patterns, deposition temperature, and gas input ratio were controlled. Fiber arrangement and porosity were the main parameters influencing densification behaviors. Final density of the composites decreased as the SiC fiber volume fraction increased. The CVI process was optimized to densify the tubular preforms with high fiber volume fraction at a high $H_2$/MTS ratio of 20 at $1000^{\circ}C$; in this process, surface canning of the composites was effectively retarded.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.472-476
• /
• 1996

The major portions of two DNA fragments, one from degradative plasmid, pRA4000 from Pseudomonas putida NCIMB 9866, and the other from degradative plasmid, pRA500 from P. putida NCIMB 9869, which harbor the structural genes for the flavoprotein (pchF) and cytochrome (pchC) subunits of p-cresol methylhydroxylase (PCMH), have been sequenced. The DNA and deduced amino acid sequences for pchC and pchF have been published. In these fragments, a coding region (dhal) for an aldehyde dehydrogenase has been identified. It is proposed that this gene encodes for the aldehyde dehydrogenase which converts p-hydroxybenzyaldehyde to p-hydroxybenzoate. p-Hydroxybezealdehyde is the product of oxidation of p-cresol by PCMH. The fragment from P. putida 9869 also harbors the genes for the ${\alpha}$ (pcaG) and ${\beta}$ (pcaH) subunits of protocatechuate 3,4-dioxigenase. The fragment from 9866 does not have any portion of these genes in the corresponding region A possible open reading frame (ORF) between pchC and pchF is seen for both clones, and a second putative open reading frame (ORF') also exists in the 9866 clone. The gene organizations are dhal-pchC-ORF-pchF-pcaGH for the DNA fragment from 9869, and ORF-dhal-pchC-ORF-pchF for the DNA fragment from 9866.

• The KIPS Transactions:PartA
• /
• v.11A no.7 s.91
• /
• pp.571-576
• /
• 2004

In this paper, by using Lagrange polynomial interpolation with a trick such that for $f(x)^{3}$ we shall use $f(x_i)^{3}I_i(x)^{3}$ instead of $I(x)^{3}$ where $I{x}{\;}={\;}\sum_{i}^{f}(x_i)I_i(x)$. We show the convergence and stability and calculate errors. These errors are approximately less than $C(\frac{1}{N})^{N-1} hN(N-1)(\frac{N}{2})^{N-1} /(\frac{N}{2})!$ where N is a polynomial degree.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.121-132
• /
• 1996

This study showed the proper pigment extract in the Phe. Dyeing which is the basic dye of the natural plants dyeing,. Also it compared and examined the K/S the promotion of the color fastness and the effect of color difference change were attended by mordants and method of mordanting. 1. The most absorbance of Phellodendron. sol-ution is 330nm berberine is 430nm. 2. The best and proper temperature to extrat Phe,. was 80 and dyeing solution for 24 hours. 3. The pH effect was stable in the absorbances and color differences change. 4. Mordanted group increased the absorbances compared to non-mordanted sample. In case depth the most absorbance of Al. Sn. K. Cu and C. A solution were in 3% Fe and Cr were in 5%. In the color difference change they became dark reduced greenish and increased yellowish when their absorbances were in 3% 5. K./S was recoginzed by tainnin and fe, K/S was more increased pre-mordants than post-mordants. 6. Fe is the unchangable mordant in the color difference change and pre-mordants is more stable than post-mordants in the difference color. 7. Generally light C. F indicated more than grade 2 and light C. F, was much improved in post-mordanted by alumium potassium potass-ium dichromate. Washing C.F was improved in mordanted by tainnin and ferrous suulfate mordanted group was better than non-mordanted sample. Perspir-ation C,F was more stable in acid than alkali. Dry cleaning C.F indicated more than grade. 4.

• The Pure and Applied Mathematics
• /
• v.30 no.2
• /
• pp.109-129
• /
• 2023

In this paper, we introduce a second order linear differential operator ^T□: C^∞ (M) → C^∞ (M) as a natural generalization of Cheng-Yau operator, [8], where T is a (1, 1)-tensor on Riemannian manifold (M, h), and then we show on compact Riemannian manifolds, divT = divT^t, and if divT = 0, and f be a smooth function on M, the condition ^T□ f = 0 implies that f is constant. Hereafter, we introduce T-energy functionals and by deriving variations of these functionals, we define T-harmonic maps between Riemannian manifolds, which is a generalization of L_k-harmonic maps introduced in [3]. Also we have studied fT-harmonic maps for conformal immersions and as application of it, we consider fL_k-harmonic hypersurfaces in space forms, and after that we classify complete fL₁-harmonic surfaces, some fL_k-harmonic isoparametric hypersurfaces, fL_k-harmonic weakly convex hypersurfaces, and we show that there exists no compact fL_k-harmonic hypersurface either in the Euclidean space or in the hyperbolic space or in the Euclidean hemisphere. As well, some properties and examples of these definitions are given.