• Kyungpook Mathematical Journal
• /
• 제48권3호
• /
• pp.473-486
• /
• 2008

In this paper we generate a fuzzy dynamical matrix Lyapunov system and obtain a sufficient condition for the observability of this system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.676-679
• /
• 1996

In this paper, the uniform observability and the error characteristics for stationary SDINS error are analyzed. The use of the Lyapunov transformation is proposed for transforming te conventional SDINS error model and the sufficient conditions for the uniform observability of SDINS error model are analytically derived. A complete characterization for the SDINS error characteristics during two position alignment is presented which allows us to predict the performance of two position alignment in SDINS.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.64-71
• /
• 1997

Objective of calibration is to find out the accurate kinematic relationships between robot joint angles and the position of the end-effector by estimating accurate model parameters defining the kinematic function. Estimating the model parameters requires measurement of the end-effector position at a number of different robot configurations. This paper studies the implication of measurement configurations in robot calibration. For selecting appropriate measurement configurations in robot calibration, an index is defined to measure the observability of the model parameters with respect to a set of robot configurations. It is found that, as the observability index of the selected measurement configurations increase the attribution of the position errors to the parameter errors becomes dominant while the effects of the measurement and unmodeled errors are less significant; consequently better estimation of parameter errors is expected. To demonstrate the implication of the observability measure in robot calibration, computer simulations are performed and their results are discussed.

• 대한전기학회논문지
• /
• 제36권11호
• /
• pp.769-776
• /
• 1987

This paper deals with the topological observability analysis and the development of an observable island identification algorithm for state estimation in power systems, by using the incidence matrix and bus voltage grouping. An analogy of the DC power flow method to the DC circuit analysis is introduced, and all the relationships between power flows and phase angles are replaced by the corresponding current-voltage relation. As a result, a set of topological measurement equation expressed in the form of the incidince matrix is derived for the topological analysis, and the observability test is carried out by examining the rand of the measuremint matrix. The integer Gauss elimination method is introduced in the determination of matrix rand, so that the proposed observability test yields a precise observability criterion without any nearly-zero pivot problem encountered in the conventional algorithm. Also, an observable island identification algorithm reduced its computational time in comparision with the conventional algorithms. The proposed algorithms have been tested for sample systems, and their practicability has verified.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.236-242
• /
• 2010

위성항법시스템과 INS가 결합된 항법 시스템은 가용 위성이 없는 경우 항법 정보를 제공하지 못하는 단점이 있다. 이러한 단점을 극복하기 위해 비전센서를 결합한 항법 시스템이 대안으로 사용되지만, 일반적으로 특징점만 사용하여 항법을 수행하므로 가관측성이 부족한 문제점이 존재한다. 이때 사전에 위치가 알려져 있는 랜드마크를 추가적으로 사용하면 특징점만 이용하는 경우에 비해 가관측성을 향상 시킬 수 있다. 본 논문에서는 추가적인 랜드마크를 사용하는 경우에 대하여, TOM/SOM 분석과 고유치 분석을 통해 가관측성 향상 정도를 분석하였다. 시뮬레이션 결과 특징점만 사용하는 경우 항상 가관측성이 부족하나 랜드마크를 사용하는 경우 2번째 갱신과정 이후에는 완전 가관측한 특성을 보였다. 따라서 랜드마크를 사용하면 가관측성이 향상되므로 전체 시스템 성능을 향상시킬수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.474-486
• /
• 2015

This paper proposes a multi-objective optimal placement method of Phasor Measurement Units (PMUs) in large electric transmission systems. It is proposed for minimizing the number of PMUs for complete system observability and maximizing measurement redundancy of the buses, simultaneously. The measurement redundancy of the bus indicates that number of times a bus is able to monitor more than once by PMUs set. A high level of measurement redundancy can maximize the system observability and it is required for a reliable power system state estimation. Therefore, simultaneous optimizations of the two conflicting objectives are performed using a binary coded firefly algorithm. The complete observability of the power system is first prepared and then, single line loss contingency condition is added to the main model. The practical measurement limitation of PMUs is also considered. The efficiency of the proposed method is validated on IEEE 14, 30, 57 and 118 bus test systems and a real and large- scale Polish 2383 bus system. The valuable approach of firefly algorithm is demonstrated in finding the optimal number of PMUs and their locations by comparing its performance with earlier works.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.1-6
• /
• 2004

This paper deals with a balanced model reduction for T-S(Takagi-Sugeno) fuzzy systems with time varying state delay. We define a generalized controllability gramian and a generalized observability gramian for a stable T-S fuzzy delayed systems. We obtain a balanced state space realization using the generalized controllability and observability gramian and obtain a reduced model by truncating states from the balanced state space realization. We also present an upper bound of the approximation error. The generalized controllability gramian and observability gramian can be computed from solutions of linear matrix inequalities. We demonstrate the efficacy of the suggested method by illustrating a numerical example.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.795-803
• /
• 2005

This paper studies the observability of calibration system with a measurement operator. The calibration system needs a simple digital indicator to measure the mobile table movements with respect to the MC coordinate. However, it yields the concern about the poor parameter observability due to measuring only a part of the movements. We uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of an observation matrix. The number of identifiable parameter is examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a 6-axis MC with parallel tilting table and the calibration results are presented. These results verify that all necessary kinematic parameters are observable and the calibration system has robustness to the noise using optimal calibration configurations.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.647-655
• /
• 2003

This paper studies the observability of calibration system with a constraint movement by a constraint operator. The calibration system with the constraint movement need only simple sensing device to check whether the constraint movements are completed within an established range. However, it yields the concern about the poor parameter observability due to the constraint movements. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters are examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a parallel typed machining center and the calibration results are presented. These results verify that the calibration system with low-cost indicators and simple planar table is accurate as well as reliable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.125-128
• /
• 1987

This paper deals with the topological observability analysis and the derivation of a reliability evaluation formula of a measurement system for state estimation. An analogy of the DC power flow method to the DC circuit analysis is introduced, and all the relationship between power flows and phase angles are replaced by the corresponding current-voltage relation. As a result, a set of topological measurement equation expressed in the form of the incidence matrix is derived for the topological analysis, and the observability test is carried out by examining the rank of the measurement matrix. The reliability evaluation formula was derived experimentally by testing the observability of sample systems of IEEE-14, IEEE-3.0, IEEE-57.