• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.57-65
• /
• 1986

The need of forecasting river flows arised whenever a river authority must make controls to protect the life and property from the flood and maintain the adequate flows for water use. This study is on the real time flood forecasting from the gauged and ungauged rainfall input and identification of second-order autoregressive(AR(2)) which is used as system model. A Kalman filter is used to obtain the values of the system parameters needed for the optimal control strategy. This system model was applied to the data at the Naiu gauging station in Young san river basin to check the accuracy and efficiency of prediction. One step ahead prediction is checked by stochastic analysis and the order of autoregressive model is proved to be satisfied, Discussions on interesting features of the model are presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.827-835
• /
• 1999

In this paper, a dead reckoning navigation system for differential drive mobile robots is presented. The navigation system consists of two incremental encoders and a gyroscope. We have built a third order polynomial function for compensating the nonlinear scale factor errors of the gyroscope. We utilize an indirect Kalman filter that feeds back estimated errors to the main navigation system. Also, the observability of the filter is analyzed in order to systematically evaluate the filter's performance. Experimental results show that the proposed navigation system provides a reliable position and heading angle by mutually compensating the encoder and the gyroscope errors. The proposed filter also reduces the computational burden and enhances the navigation system's reliability. The observability analysis confirms the characteristics of inevitably unbounded position error growth in dead reckoning navigation systems.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2001

A method for actively controlling dynamic reaction forces in flexible structures subject to persistent excitations is presented. Since reaction forces are not directly measured in flexible structures, reaction forces are estimated by using the Kalman filter. The estimated reaction force is used as an error signal in the adaptive feedforward disturbance cancellation controller. In order to compensate the static effect of the truncated modes in the reaction forces, the residual flexibility matrix is used with the Kalman filter. The paper presents the formulation of the reaction forces in conjunction with the Kalman filter estimator and the adaptive feedforward controller. The results show that the dynamic reaction forces at its supports in a flexible beam test rir are well suppressed.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.347-352
• /
• 2016

This paper investigates the application, design and implementation of unscented Kalman filter observer using the various scaling parameters for the sensorless speed control of a permanent magnet synchronous motor. The principles of unscented transformation and unscented Kalman filter are examined and their applications are explained. Typically the mapping transformation process is divided into two types, namely the basic unscented transformation and the general unscented transformation by virtue of the scaling parameter value. And resultantly, the number of sampling points, weights, code configuration and computation time are different. But there is no little information on the scaling parameter value or how this value influences the system performance. To analyze the unscented transformation with the various scaling parameters in this study, the experimental results under a wide range of operation condition have been demonstrated.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.544-548
• /
• 1999

Using Observer, on the sensorless vector control system is a novel techniques for modern induction motor control. In this paper, a speed estimation algorithm of an induction motor using an extended kalman filter was proposed. Extended kalman filter can solve the problem, that have steady state error of estimated speed in flux and slip estimation method. The extended Kalman filter is employed to identify the speed of an induction motor and rotor flux based on the measured quantities such as stator current and DC link voltage. In order to confirming above proposal, computer simulation carried out using Matlab Simulink and show the effectiveness of the control drives for induction motor speed estimation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.3
• /
• pp.294-300
• /
• 2009

In high speed railway bridges, dynamic analysis is important because of high passing velocity and moving load at the regular intervals, and damping ratio is a major parameter to predict dynamic responses. In this paper, damping ratios were estimated by using half power band width method and extended Kalman filter according to acceleration signal conditions, and a relationship between estimated damping ratios and representative values of bridge vibration was derived. From the results, damping ratios estimated from total ambient vibration were more reliable than only free vibration part. In case of using extended Kalman filter, the estimated damping ratios varying with RMQ(root mean quad), as one of representative values of bridge vibration, have more feasible trend. Thus, it is shown that further studies on reliabilities of estimated damping ratios are needed.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.369-371
• /
• 2007

Due to the measurement noise or system noise, the performance of photovoltaic power generation system can be degraded. If this noise is contained in the solar array voltage measurement signal, the correct operation of the maximum power point tracker can not be guaranteed. The application of the extended Kalman filter to the photovoltaic system can obtain enhanced states estimation result. The Kalman filter provides a recursive solution to optimally estimate from random noise signals. Additionally, as a consequence of Kalman filter, the unmeasurable state such as inductor current can be estimated without current sensor. The methods for system modeling and extended Kalman filter design are presented and the experimental results verify the validity of the proposed system.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.204-213
• /
• 2008

In this paper, we present the practical application of an Unscented Kalman Filter (UKF) for an Indoor Mobile Localization System using ultrasonic sensors. It is true that many kinds of localization techniques have been researched for several years in order to contribute to the realization of a ubiquitous system; particularly, such a ubiquitous system needs a high degree of accuracy to be practical and efficient. Unfortunately, a number of localization systems for indoor space do not have sufficient accuracy to establish any special task such as precise position control of a moving target even though they require comparatively high developmental cost. Therefore, we developed an Indoor Mobile Localization System having high localization performance; specifically, the Unscented Kalman Filter is applied for improving the localization accuracy. In addition, we also present the additive filter named 'Pre-filtering' to compensate the performance of the estimation algorithm. Pre-filtering has been developed to overcome negative effects from unexpected external noise so that localization through the Unscented Kalman Filter has come to be stable. Moreover, we tried to demonstrate the performance comparison of the Unscented Kalman Filter and another estimation algorithm, such as the Unscented Particle Filter (UPF), through simulation for our system.

• Water for future
• /
• v.24 no.3
• /
• pp.83-94
• /
• 1991

In this paper a discrete extended Kalman filter for the tidal prediction has been developed. The filter is based on a set of difference equations derived from the one dimensional shallow water equations using the finite difference scheme proposed by Lax-Wendroff. The filter gives estimates of the water level and water velocity, together with the parameters in the model which essentially have a random character, e.g. bottom friction and wind stress. The estimates are propagated and updated by the filter when the physical circumstances change. The Kalman-filter is applied to field data gathered in the coastal area alon the West Sea and it is shown that the filter gives satisfactory results in forecasting the waterlevels during storm surge periods.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.253-255
• /
• 2004

Conventional magnetic levitation systems could show unsatisfactory performance under air-gap disturbance due to rail irregularities. In this paper, we propose a feedback control system with discrete Kalman filter for air-gap disturbance attenuation. It is shown that excellent system performance can be obtained with the use of discrete Kalman filter, and that results from experiments agree well with those of simulations.