• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1920-1926
• /
• 2006

With social interest, there hie been a lot of research on the Service Robot but now we are faced with the limitation of single platform. The alternative plan is the Ubiquitous-based Service Robot connected with a Ubiquitous network to overcome this limitation. Systems using RFID(Radio frequency Identification) and supersonic waves appeared for functions such as recognition of surroundings through Ubiquitous Sensor Networks. This was applied to the real robot and we have got good results. However, this has several limitations to applying to low power-based Sensor Network For example, if RFID uses a passive Sensor, the rate of recognition with the distance is limited. In case of supersonic waves, high power is required to drive them. Therefore, we intend to develop RSSI position recognition system on the basis of embodying a Sensor Network Module in this thesis. This RSSI position recognition system only measures RSSI of signals from each sensor nod. then converts them into distances and calculates the position. As a result, we can still use low power-based Sensor Network and overcome the limitation according to distance as planning Ad-Hoc Network.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.592-595
• /
• 2013

Advent of Wireless Sensor Networks (WSN) has provided potentials to a variety of construction applications. It is well appreciated that WSNs have advantages over traditional wired system, such as ease of installation and maintenance with increased cost savings and efficiencies. However, the obstruction of wireless signal from physical objects in the heterogeneous construction environment often brings challenges to WSN measurement system. This paper analyzed the obstruction characteristic of construction environment where construction materials, equipment, and built structures obstruct the wireless signal yielding negative effect of measurement system. By adopting evaluation criteria, such as packet reception rate, field experiments have been implemented to quantitatively identify the interference of wireless signal from penetration, reflection, and network traffic under the construction environment. The results show that reliable performance of wireless sensor in construction environment depends on the optimal separation distance between a receiver and a transmitter, obstruction types, obstruction thickness, and transmission interval. In addition, the methodology and experimental results of this paper could be used in the practical design of network topology when hundreds of sensor nodes form a mesh network in the large scale construction applications.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.601-606
• /
• 2008

U-Healthcare is one of the major applications in ubiquitous sensor network. U-Healthcare has potential to become a critical service for the people who immediately require emergency ambulatory attention. This paper describes about the real time pulse monitoring and reporting system, consisting of two components: thus, the one is a reliable bio-sensor that continuously monitors the pulse information of the subject, and the other is the automatic transfer system that transmits pulse information to both his/her family and hospital care system through the Base Station. In the hospital, this bio-information can be used to treat the patient accordingly. I designed the pulse information monitored by a bio-sensor module that transfers the pulse information to both the Base Station and the central monitoring system through transmitting protocols such as Zigbee and TCP/IP, as well as designed the architecture of information packets for the corresponding protocols. Furthermore, the central monitoring system automatically parses the pulse information of the subject into the web database server, which can continuously provides the real time information and status of the subject via an internet browser to the clients who are family members of the subject and the authenticated medical care personnel as well.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.6
• /
• pp.339-343
• /
• 2012

Security and monitoring system has many applications and commonly used for detection, warning, alarm, etc. As the networking technology advances, user requirements are getting higher. An intelligent and cooperative surveillance system is proposed to meet current user demands and improve the performance. This paper focuses on the implementation issue for the embedded intelligent surveillance system. To cover wide area cooperative function is implemented and connected by wireless sensor network technology. Also to improve the performance lots of sensors are employed into the surveillance system to reduce the error but improve the detection probability. The proposed surveillance system is composed of vision sensor (camera), mic array sensor, PIR sensor, etc. Between the sensors, data is transferred by IEEE 802.11s or Zigbee protocol. We deployed a private network for the sensors and multiple gateways for better data throughput. The developed system is targeted to the traffic accident detection and alarm. However, its application can be easily changed to others by just changing software algorithm in a DSP chip.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

In order to control moving facilities on a remote place effectively, it are required to acquire a environment informations such as images where the moving facilities are placed. However, since there is no tools to acquire such informations to the central control system based on the non-networked sensor environments, it is difficult to control the moving facilities remotely. Therefore, we design and implement the Zigbee based image transmission system and communication protocol to control the moving target remotely. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented Zigbee based control systems and communication protocol have the normal and replay function for a realtime control of the moving target under the server PC and the mobile FDA with the WiFi protocol. The functional operability and performance are analyzed by a designed prototype under the wireless home network environment.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1474-1482
• /
• 2006

Recently, it is advanced about the variable research of IPv6 and the wireless sensor network. However, the existed researches are not enough about the internetworking technology between the wireless sensor network and the Internet based on IPv6 for supporting ubiquitous service. Accordingly, this paper proposes two internetworking models for connecting the wireless sensor network and Internet based on IPv6. The relay router in the first model and the sink node of the wireless sensor network in the second mode] were used as a gateway. Then we analyze and compare with two internetworking models. Additionally we construct the test-bed connected between the wireless sensor network and KOREN(KOrea advanced REsearch Network) based on IPv6 using the first model. And we verified the operation of the test-bed by experiments.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.412-417
• /
• 2009

With ubiquitous computing aid, it can improve human being's life quality if all people have more convenient medical service under pervasive computing environment. In this paper, for a pervasive health care application for diabetes patient, we've implemented a health care system, which is composed of three parts. Various sensors monitor both outer and inner environment of human such as temperature, blood pressure, pulse, and glycemic index, etc. These sensors form zigbee-based sensor network. And as a backend, medical information server accumulates sensing data and performs back-end processing. To simply transfer these sensing values to a medical team may be a low level's medical service. So, we've designed a model with context awareness for more improved medical service which is based on ART(adaptive resonance theory) neural network. Our experiments show that a proposed healthcare system can provide improved medical service because it can recognize current context of patient more concretely.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.742-748
• /
• 2009

Zigbee wireless communication technology has features which are low cost, low power and coping ability against a high delay time when the automatic wireless system is manufactured. Therefore, in this paper, we research a method improving the data transmission reliability of the industrial equipment control and management system using zigbee wireless communication technology. we used a convolutional code with code rate R=1/2, constraint K=5 and generation polynomial constant g1=(10111) and g2=(10011) as a reliability method. From the transmission simulation at LOS environment, we are able to predict the transmission error performance according to the distance difference. Furthermore, At the PER performance analysis, we can get the result that this system reliability with convolutional code is improved about 5 times than the existing system. From these results, we can prove that the convolutional code is the solution to improve the system reliability of the industrial equipment control and management system using zigbee wireless communication technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.312-315
• /
• 2008

Recently, owing to the development of ubiquitous, RFID and local area wireless communication technology, many studies on the system which can measure biomedical signals are being carried out. In this paper, we have designed and implemented an u-Healthcare system based on sensor network using biomedical signal measurement sensors such as ECG, blood pressure, and heartbeats. The biomedical signals from sensor nodes pass through the gateway and are finally transmitted to a healthcare renter. The acquired biomedical signals are processed in the healthcare center and the analyzed results are transmitted to the patients to improve patients' health using either kinesitherapy or dietary treatment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.397-400
• /
• 2007

Indoor air-conditioning system(IAS) using wireless sensor network serves to reduce the amount of pollution entering the room from outside and also the pollution that is generated indoor. Small-size and lower power wireless sensor node and sensor interface board was designed for indoor air-conditioning system in buildings of offices and industrial establishments. Many sensor nodes forms Ad-hoc network topology using simple forwarding routing to transmit polluting gas concentration data from different rooms to the indoor air-conditioning system. Sensor node analyzes pollution concentration in the each room and air-conditioning system performs to air-distribution and air-inhalation according to room's pollution by regulating the fan of indoor air-conditioning system. To reduce power consumption electrochemical gas sensor was used in the design. Thus the designed system can optimize state of indoor environment. Graphic user interface displays node sate, gas concentration and temperature of each room.