• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.7-15
• /
• 2020

Purpose: In modern radiotherapy technology, several methods of image guided radiation therapy (IGRT) are used to deliver accurate doses to tumor target locations and normal organs, including CBCT (Cone Beam Computed Tomography) and other devices, ExacTrac System, other than CBCT equipped with linear accelerators. In previous studies comparing the two systems, positional errors were analysed rearwards using Offline-view or evaluated only with a Yaw rotation with the X, Y, and Z axes. In this study, when using CBCT and ExacTrac to perform 6 Degree of the Freedom(DoF) Online IGRT in a treatment center with two equipment, the difference between the set-up calibration values seen in each system, the time taken for patient set-up, and the radiation usefulness of the imaging device is evaluated. Materials and Methods: In order to evaluate the difference between mobile calibrations and exposure radiation dose, the glass dosimetry and Rando Phantom were used for 11 cancer patients with head circumference from March to October 2017 in order to assess the difference between mobile calibrations and the time taken from Set-up to shortly before IGRT. CBCT and ExacTrac System were used for IGRT of all patients. An average of 10 CBCT and ExacTrac images were obtained per patient during the total treatment period, and the difference in 6D Online Automation values between the two systems was calculated within the ROI setting. In this case, the area of interest designation in the image obtained from CBCT was fixed to the same anatomical structure as the image obtained through ExacTrac. The difference in positional values for the six axes (SI, AP, LR; Rotation group: Pitch, Roll, Rtn) between the two systems, the total time taken from patient set-up to just before IGRT, and exposure dose were measured and compared respectively with the RandoPhantom. Results: the set-up error in the phantom and patient was less than 1mm in the translation group and less than 1.5° in the rotation group, and the RMS values of all axes except the Rtn value were less than 1mm and 1°. The time taken to correct the set-up error in each system was an average of 256±47.6sec for IGRT using CBCT and 84±3.5sec for ExacTrac, respectively. Radiation exposure dose by IGRT per treatment was measured at 37 times higher than ExacTrac in CBCT and ExacTrac at 2.468mGy and 0.066mGy at Oral Mucosa among the 7 measurement locations in the head and neck area. Conclusion: Through 6D online automatic positioning between the CBCT and ExacTrac systems, the set-up error was found to be less than 1mm, 1.02°, including the patient's movement (random error), as well as the systematic error of the two systems. This error range is considered to be reasonable when considering that the PTV Margin is 3mm during the head and neck IMRT treatment in the present study. However, considering the changes in target and risk organs due to changes in patient weight during the treatment period, it is considered to be appropriately used in combination with CBCT.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.424-430
• /
• 2010

Immuno-modulatory activities of peptides from Asterias amurensis were investigated using a nano-encapsulation process. The molecular weights of the peptides in the range of 5-7 kDa were separated using Sephadex G-75 gel filtration. Eighty-five percent of the nano-particles were in the 300 nm range using dynamic light scattering. The cytotoxicity of the A. amurensis nano-particles against CCD-986sk human dermal fibroblast cells was 11.64% after adding 1.0 mg/mL of the samples, which was lower than that from the control (13.28% collagen). The secretion of $NO^-$ from macrophages was estimated as $40\;{\mu}M$ after adding 1.0 mg/mL of gelatin nano-particles, which was higher than the others. Prostaglandin $E_2$ production from UV-induced human skin cells decreased greatly to 860 pg/mL after adding 1.0 mg/mL of the samples. Confocal microscopy revealed that nano-particles effectively penetrated the cells within 1 hour. From these results, we consider that nano-encapsulation of the peptides from A. amurensis can improve their biological functions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.209-216
• /
• 2002

How to estimate the shape of trawl net and ropes of a midwater trawl on full scale was described by implementing a three-dimensional semi-analytic treatment of a towing cable system with the field experiments obtained with the Scanmar system. The shape of trawl net from wingend to the beginning of codend was assumed to be of form $\chi$$^2$/ae$^2$+ y$^2$/be$^2$=(z - c)$^2$/c$^2$, and that of the ropes attached behind otter boards be of form yr = $A\chi$rB. In case of warp length 300m long, the volume of trawl net, the ratio of net height to net width at the mouth of the trawl net, and the inclination angle of float rope were estimated according to the change of towing speed. The volume and the distance between wingtips were increased with increasing towing speed. And the inclination angle of float (or ground) rope was slightly decreased with increasing towing speed.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.15-19
• /
• 1983

To establish the stand volume table of Pinus koraiensis S. et Z. and Larix leptolepsis Gord. mean diameter at breast height (D), mean height, basal area per ha, stand from height (H.F), basal area height, number of trees per ha, volume per ha, stand age and site were investigated for 107 plots of P. koraiensis and 82 plots of L. leptolepsis throughout the country. The obtained results are as follows; 1) the relationships between stand volume (V) and H.F. were log V=1.3855+0.1168 H.F and log V+0.9929+0.1543 H.F in P. koraiensis and L. leptolepsis, respectively. 2) The relationship between D and H.F was estimated as H.F = 1.2569+0.2576D for P. koraiensis and as H.F = 4.3045+0.1443D for L. leptolepsis 3) Estimated errors calculated with the application of these stand volume tables were 18.29% and 19.22%r for P. koraiensis and L. leptolepsis respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.97-112
• /
• 1978

The rule 15, 16 and 17 of International Regulations for Preventing collisions at Sea direct actions to avoid collision when two power-driven vessels are crossing. But these rules do not present the safety minimum approaching distances outside which a give- way vessel deeps out of the way of a stand-on vessel. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship kinematics as the method to calculate this distance. The author worked out mathematic formulas for calculating the safety minimum approaching distances outside which the give-way vessel takes the actions to avoid collisions in accordance with the cross angles of the crossing vessels' courses. Figuring out actually the values of maneuvering indices of the M. S. Koan Ack San (GT: 224tons), the training ship of the National Fisheries University of Busan and the M. S. Golden Clover (GT: 101, 235tons) of the Eastern Shipping Co., Ltd. through their Z test, the author applied these values to the calculating formulas and calculated the safety minimum approaching distances. The results of calculations are as follows; 1. The greatest distance is to be kept by the give-way vessel to avoid collision when the cross angle of courses is 90$^{\circ}$ or near it. In such case the safety minimum approaching distance of a small vessel must be more than 5 times of her own length and that of a large vessel more than 11 times of her own length. 2. Collision danger is greater when crossing angle is obtuse than in an acute angle, therefore greater distance is to be kept by the give-way vessel to avoid collision in the case of the obtuse angle. 3. The actions to be taken to avoid collisions by the give-way vessel in Rule 16 and by the stand-on vessel in Rule 17(a)(ii) of International Regulations for Preventing Collisions at Sea, must be done outside the above safety minimum approaching distance. When inevitably such actions are to be taken within the safety minimum approaching distance, they should be accompanied with engine motions.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.548-557
• /
• 2001

This study was carried out to classify forest vegetation of Mt. Myeonsan with phytosociological analysis of ZM School and to explain community types with CCA ordination. The research sites were located in the northern part of Kyungsangpook-Do area and in the southern part of Kangwon-Do. The 73 plots were investigated in the study areas which were including 291 plant species. The forest vegetation was classified into Quercus mongolica community group, Juglans mandshurica community group, and Larix leptolepis plantation. Q. mongolica community group was divided into 9 communities such as Rhododendron schlippenbachii community, Symplocos paniculata community, Pinus densiflora community, Betula schmidtii community, Fraxinus rhynchophylla community, Populus davidiana community, Tilia amurensis community, Betula costata community and Betula davurica community. J. mandshurica community group was divided into 5 communities and 4 groups such as Acer mono community (subdivided into Quercus serrata group and typical group), Fraxinus mandshurica community, Ulmus laciniata community (subdivided into typical group and Ribes mandshuricum group), Malus baccata community and Carpinus laxiflora community. And it was entirely classified into 17 vegetation units. According to CCA, Q. mongolica community group showed high positive correlation to topography, altitude and slope degree, and J. mandshurica community group showed high positive correlation to bare rock. However, L. leptolepis community group was not significantly ordinated with the gradient of environmental factors. And in correlation of axes, important environmental variables were topography and altitude.

• Journal of Animal Environmental Science
• /
• v.10 no.2
• /
• pp.75-80
• /
• 2004

Field experiments were conducted in 2002 on sandy loam soil under variable fertilizer management; swine slurry and chemical fertilizer. The effect of different fertilizer management and application method on the growth characteristics and yield of rice were determined. The rice was planted to examine the effect of swine slurry on the crop growth. As slurry manure was fertilized, yield of each group of rice was decreased from 3 to $5\%$. In conclusion, basal application of slurry was maintained productivity of rice, but to improve of productivity of rice, the rice should be fertilized with the basal application of animal slurry and supplementary application of chemical fertilizer. The results indicates that application of animal slurry improves quality of rice rather quantity, which means grain yield. Rice quality of the slurry+chemical and the slurry were significantly better than that of the chemical fertilizer. That indicates application of animal slurry could improve rice quality. Application of animal slurry seemingly has potentials for reducing pollution of animal slurry and improving environment of rural area as well as producing high-quality rice.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.609-614
• /
• 2009

Sesame oil was sometimes replaced by mixed oil due to high price in Korean market. To find out authentic sesame oil, electronic nose (E-nose) based on mass spectrometer system was used. Sesame oil was blended with perilla oil at the ratio of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by E-nose based on MS were completely different from those of perilla oil. The obtained data was used for discriminant function analysis. For quantitative analysis, the partial least square algorithm was used. The added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1) and second score (DF2). From this relationship it could be found out how much perilla oil added. DFA plot indicated a significant separation of pure sesame oil and pure perilla oil. The different geographical origin of sesame oil was used for blending with perilla oil were closed to that of sesame oil. Korean sesame oil mixture and Indian sesame oil one were well separated. And the correlation between mixing ratios and DF1 values was found at the ratio of 97:3, 91:9, and 85:15 (SE vs PE oil), respectively. But the added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1). E-nose based on MS system could be used as an efficient method for purity of oil quality.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.275-281
• /
• 2009

Sesame oils are partially mixed with other vegetable oils due to high price in a Korean market. To find out authentic sesame oil, a mass spectrometer-based electronic nose (MS-based E-nose) was used. Sesame oil (Se) was blended with soybean oil (So) or corn oil (Co) at the ratio (Se:So, Se:Co) of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by MS-based E-nose were completely different from those of soybean oil or corn oil. The obtained results were used for discriminant function analysis (DFA). Volatile organic components (VOC) of soybean oil or corn oil were similar to those of fresh air and DFA plot indicated a significant separation of pure sesame oil and pure other oil. The group of the mixed oil was seperated with that of sesame oil in DFA plot and the added amount of soybean oil to sesame oil was correlated with discriminant function first score (DF1). MS based E-nose system could be used as an efficient method to investigate the purity of sesame oil.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.417-424
• /
• 2015

In this study, the relationship between selenoprotein concentrations in blood and stomach cancer have been searched for Korean. The concentration of each selenoprotein in blood serum was analyzed and the correlation between the concentration and stomach cancer was studied to find a potential for using Selenium as a biomarker. In concentration determination, a simple calibration curve method was used with the monitoring of m/z 78 without the use of solid phase extraction. This is a lot more simple than the method using SPE with post column isotope dilution. The result obtained from the analysis of CRM BCR-637, 72.20±3.35 ng·g⁻¹, showed similar value of reference value (81±7 ng·g⁻¹). The total concentration of Se for the controlled group, cardiovascular patients group, was 105.70±21.20 ng·g⁻¹. This value was the same as normal healthy person reported earlier. Each selenoprotein concentration of GPx, SelP and SeAlb was 26.12±7.84, 65.15±14.50, 14.43±6.99 ng·g⁻¹, respectively. The distribution of each selenoprotein was 24.7%, 61.6%, and 13.7%, which was similar to the normal person. The result of stomach cancer patients, the total concentration of Se was 76.11±28.12 ng·g⁻¹ and each concentration of GPx, SelP and SeAlb was 15.41±9.01, 50.83±17.91, and 9.87±5.21 ng·g⁻¹, respectively. The total and each selenoprotein concentration level showed significant decrease for the stomach cancer patients. The level of decrease was 41.0% for GPx, 22.0% for SelP, and 31.6% for SeAlb. However, the distribution of each selenoprotein was not much different. Either total Selenium or each selenoprotein could be used as a possible index for the diagnosis of cancer. However, in age group study, it is shown that young age group (30's-40's) did not show much difference.