• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.241-276
• /
• 2022

Due to the 4th industrial revolution, which started with the Smart Revolution in the early 21st century, Hyper-Connectivity, Hyper-Convergence and Hyper-Intelligence of our society is accelerating. These changes induced formation of Metaverse as a fused new space that crosses the perimeter of the physical space and virtual(digital) spaces beyond time and place. The characteristics of Metaverse are continuously spread by engaging with the characteristics of the MZ generation, which collects both Millennial generation (M Generation) and Z Generation. With outburst of Covid-19 pandemic, a variety of attempts have been made to utilize Metaverse, even in church education when it was impossible to worship directly. In other words, the usefulness of the Metaverse was confirmed as a new community space of the education of the church. In addition, Metaverse may provide a substantial, experiential and evolving space for church education. However, in order for church education to further develop, the development in the method of education is also required to move beyond mere concept of space. In particular, when the learner-centered education method, one of the common characteristics of the Metaverse and MZ generation, it is thought that the church education in the Metaverse era will be able to go in a more evolving direction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.980-989
• /
• 2009

Amur cork tree was extracted in methanol with the purpose of investigating the most effective extraction procedure for detecting the chromophore using the GC-MS analysis. Different procedures of waterbath and hotplate extractions were carried out and five different GC-MS instrument parameters including the operating temperatures in the GC capillary column and the MSD scan range were tested for their efficiencies. Berberine was determined by the detection of dihydroberberine at 15.0 min r.t. Hotplate was a better device for extracting amur cork tree than waterbath shaker either with or without presoaking in the room temperature. Water was not an adequate extraction medium for the berberine detection. The most effective GC-MS parameter was Method 4; the initial temperature at $50^{\circ}C$ followed by the temperature increase of $23^{\circ}C$/min until $210^{\circ}C$, then increase of $30^{\circ}C$/min until the final temperature reach at $305^{\circ}C$, then hold for 14 minutes to maintain the total run time 24.12 minutes. The MSD scan range for Method 4 was $35\sim400$m/z.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1988

In the three-dimensional analysis and deformation analysis of large structures, efficient is the use of the multiple method of close range photogrammetry which approaches the object distance. This study analyzes the influence of errors according to the overlap, the control points, and the object distance, to solve the problems which are raised in the multiple method. A wall-board, 7 meters by 3 meters, was used as a test field on which a total of 225 unknown points were equally disposed. The photographs with changing the overlap and object distance were taken by P-31 camera system. a total of 143 negatives are used in this study for computing 3-dimensional coordinates and its standard errors, and bundle adjustment of strips and blocks developed with on-line system is applied. In case of decreasing the number of control points, simulation error increases but actual error decreases and increases again. Due to the changed of object distances Z error represents largely compared to X, Y error, but good results in Z can be obtained by increasing the redundancy. And simulation error or actual error shows best results at the endlap of about 70%. To sum up this study, approprate arrangement of control points and overlap is meaningful, and multiple method by short object distance will be widely used to precision and deformation analysis of critical structures.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.107-116
• /
• 1999

To study the characters of surface sediment and to describe the seasonal depositional environment as a result of sedimentation process off Byun-San Peninsula, a total 61 samples of surface sediment (32 samples in summer; 29 samples in winter) were collected and analysed. A digitized depth data from sea chart and echosounding profiles along five trans-sections were helpful for understanding the morphological factors. The types classified by the characters of surface sediment are type I (sand, S), type II (silty sand, zS), and type ill (sandy silt, sZ). Mean grain size varies from 2.11 to 7.81 ${\Phi}$. The positive-skewness shows the typical tide-dominated environment. The sediment type of the northwestern stations is medium sand and the sorting value is 0.5~1.4 ${\Phi}$ of well/moderately sorted. Meanwhile, other stations are composed of muddy sands and sandy muds transported from rivers and offshore. These sediment types toward inshore change gradually from silty sand to sandy silt. According to the C/M diagram, there are three major transport modes of sediment: bed load (Mode A), graded suspension (Mode B), and suspension (Mode C), correlating with north-eastern sandy area, middle part of silty-sand area, and southern sandy-silt area, respectively. The result of Principal Component Analysis shows also similar pattern of sediment types. In result, sediment texture of type III tends to be finer and more poorly-sorted than that of type II and sediment facies are correlateed with sedimentation process.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.428-434
• /
• 2008

The purpose of this study was to compare the microtensile bond strength in Class I cavities associated with different light curing modes of same light energy density. Occlusal enamel was removed to expose a flat dentin surface and twenty box-shaped Class I cavities were prepared in dentin. Single Bond (3M Dental product) was applied and Z 250 was inserted using bulk technique. The composite was light-cured using one of four techniques, pulse delay (PD group), soft-start (SS group), pulse cure (PC group) and standard continuous cure (CC group). The light-curing unit capable of adjusting time and intensity (VIP, Bisco Dental product) was selected and the light energy density for all curing modes was fixed at $16J/cm^2$. After storage for 24 hours, specimens were sectioned into beams with a rectangular cross-sectional area of approximately $1mm^2$ Microtensile bond strength $({\mu}TBS)$ test was per- formed using a univel·sal testing machine (EZ Test, Shimadzu Co.). The results were analyzed using oneway ANOVA and Tukey's test at significance level 0.05. The ${\mu}TBS$ of PD group and SS group was higher than that of PC group and CC group. Within the limitations of this in vitro study, modification of curing modes such as pulse delay and soft start polymerization can improve resin/dentin bond strength in Class I cavities by controlling polymerization velocity of composite resin.

• Korean Journal of Environmental Biology
• /
• v.24 no.3
• /
• pp.268-274
• /
• 2006

This study was carried out to classify forest vegetation structure of the subalpine zone in Mt. Seorak (Daecheongbong 1,708 m) from June to August in 2005 with phytosociological analysis of ZM school. Samples were collected by 81 of releves more than 1,200 m of altitude. There were 14 of physiognomy stands in the study area. The results were summarized as follows. Vegetation of the area was characterized by Abies nephrolepis community group, which was classified into Rhododendron schlippenbachii community and Lonicera coerulea var. emphyl-localyx community. The former was divided into Acer truncatum group and Pinus koraiensis group (subdivided into Acer tschonoskii var. rubripes subgroup and Tilia taquetii subgroup) and the latter was into Pinus pumila group and Juniperus chinensis var. sargentii group. It consisted of 5 units of vegetation structure.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.5-10
• /
• 1998

The microbial degradation, photosensitizer-mediated photolysis, and bioceramic- accelerated degradation of the herbicide imazapyr were investigated using four types of soil. 1. Seven strains of microorganisms isolated from the soil A and the active sludge collected from the waste water disposal plant in CheongJu did not give any distinct degradation products in pure culture. When imazapyr (10ppm) was incubated for 14days with each of the 6strains of the known bacteria, they did not produce any noticeable products, either, suggesting that imazapyr was degraded very little by microorganisms in aqueous media. Meanwhile, when 50ppm of imazapyr was incubated in soil A and B for 6months, a degradation product of m/z 279 was detected. It turned out to be 2-[(1-carbamoyl-1,2-dimethylpropyl)carbamoyl]nicotinic acid, which was formed by the hydrolytic cleavage of the imidazolinone ring and by tautomerism. When imazapyr was exposed to sunlight, degradation rates were 14.6% under the control and 66.0, 76.5, 26.7, and 90.0% in the presence of PS-1 (100ppm), PS-1 (200ppm), PS-2(100ppm), and PS-3(100ppm), respectively, and a degradation product of m/z 149 was tentatively identified in the treatment of PS-1. 2. When soil C and D treated with bioceramic were incubated for 7weeks, the $^{14}C$-activities of $^{14}CO_2$ evolved were 2.03 and 1.12% of the originally applied ones, respectively, whereas those in control soils without bioceramic were 1.88 and 0.82% showing no significant defferences.After 5 weeks, however,the differences in the amounts of $^{14}CO_2$ between the two treatments increased gradually, suggesting the bioceramic effect.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.385-394
• /
• 2016

A fabric excavated from tombs or passed down is not easy to find its original color as it degrades and discolors by UV and visible rays, oxygen and microorganisms. LC-MS analysis is commonly used for separating and analyzing colors, but color extraction process is complicated and important in dye-qualitative analysis. To extract red colors from a fabric which is dyed with safflower and lac, solvents; hydrogen chloride, pyridine and oxalic acid are used and oxalic acid was the most effective solvent. Meanwhile, dyed samples were put in degradation condition; UV-A for 168 hours and analyzed with LC-MS to find out its colors'chemical changes. As a result, carthamin is detected in $T_R$ 13 min and laccaic acid A is detected in $T_R$ 10 min. However carthamin is not detected in a degraded fabric dying with safflower, it could be identified as a safflower fabric by the molecular weight of m/z 931. Through this study the most optimal method for red color extraction is found so it is expected to be used as a base line data for red color LC-MS analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

The purpose of this study was to compare the polymerization shrinkage of several filling methods using strain gauges. In this study, a light-emitting diode(LED) curing unit(Elipar Freeligh2, 3M EPSE, USA) and plasma arc lamp(PAL) curing unit(Flipo, LOKKI, France) were used for curing, Filtek $Z350^{TM}$(3M EPSE, USA) composite resin was used for the cavity filling. Sixty permanent bicuspid teeth, that were extracted for orthodontic treatment, were studied. The cavities were prepared on the occlusal surface and were filled using the following methods : 1) bulk filling, 2) parallel filling, 3) oblique filling The strain was recorded on the buccal, lingual, mesial and distal surfaces and the strain values were computed into stress values. The shear bond strength of each filling method was tested using a Micro Universal Testing machine. The results can be summarized as follows: 1. In the strain changes, all LED and PAL curing groups showed an increase on the buccal surface and a slow decrease as time elapsed. 2. In the strain changes of the mesial and distal surfaces, the decreases and increases were shown repeatedly and reduced as time elapsed. 3. There were no significant statistical strain changes among filling methods in the LED or PAL curing groups. 4. There were significant statistical strain changes between the LED and PAL curing groups on the buccal surface(p<0.05). 5. From the shear bond strength results, in the LED curing group, filling method 3 showed lower surface stress than filling method 1 and 2(p<0.05). In the PAL curing group, there were no significant statistical strain changes between each filling method. 6. The surface stress of each group was lower than the shear bond strength.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.345-351
• /
• 2011

A liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS) method was developed and validated for the determination of finasteride in human serum. Beclomethasone was used as internal standard (IS) and liquid-liquid extraction (LLE) using methyl tert-butyl ether (MTBE) was carried out to isolate analyte. The mass transitions monitored in multiple reaction monitoring (MRM) in positive ion mode were m/z 373.2${\rightarrow}$305.2 for finasteride and m/z 409.3${\rightarrow}$391.2 for IS. Retention times of finasteride and IS were 5.81 and 5.46 min, respectively. The limit of quantitation (LOQ) was 0.1 ng/mL and the calibration curve showed good linearity in the range of 0.1~20.0 ng/mL ($R^2$=0.9997). The intra-day assay precision and accuracy were in the range 6.3~10.6% and 97.3~103.6%, respectively, and the inter-day assay precision and accuracy were in the range 0.8~5.2% and 99.8~102.5%, respectively. The sample extract recovery of the method was 80~83%.