• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2010

Severe energy constraints and the low power consumption require the significance of the energy efficient error control mechanisms in wireless sensor network (WSN). In this paper, an automatic repeat request (ARQ) methodology for the analysis of error control schemes in WSN is presented such that the effects of packet length, the modulation scheme and the interference effect of the wireless channel are investigated. Moreover, an analyis of ARQ error control is provided by considering two major architectures for wireless sensor network, i.e., Mica2 and MicaZ sensor nodes. And the throughput performance of WSN with asynchronous FSK signal and DSSS-OQPSK signal with selective repeat ARQ scheme are analyzed in multiple interference environment, and the probability of receiving a correct bit and packet from target node to sink node is evaluated as a function of the channel parameter, the number of wireless sensor node, and the spreading factor.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.589-599
• /
• 2014

On the basis of the traditional ZSI (Z-source inverter), this paper presents a ESL-${\Gamma}$-ZSI, which uses a unique ${\Gamma}$-shaped impedance network and an extended SL network for boosting its output voltage in addition to their usual voltage-buck behavior. The inverter can increase the boost factor through adjusting shoot-through duty ratio and increasing the number of inductors. Capacitor voltage stress of ESL-${\Gamma}$-ZSI is a constant when 1>D>0, and ESL-${\Gamma}$-ZSI has small inductor current stress. The working principle of ESL-${\Gamma}$-ZSI and comparison with the classical ZSI and SL- ZSI are analyzed in detail. The power loss comparison between ESL-${\Gamma}$-ZSI and Cuk converter is analyzed detailedly. Simulation and experimental results are given to demonstrate the operation features of the inverter.

• Transactions of Materials Processing
• /
• v.27 no.6
• /
• pp.331-338
• /
• 2018

Electrohydraulic forming (EHF) process is a high speed forming process that utilizes the electric energy discharge in fluid-filled chamber to deform a sheet material. This process is completed in a very short time of less than 1ms. Therefore, finite element analysis is essential to observe the deformation mechanism of the material in detail. In addition, to perform the numerical simulation of EHF, the material properties obtained from the high-speed status, not quasi static conditions, should be applied. In this study, to obtain the parameters in the constitutive equation of Al 6061-T6 at high strain rate condition, a surrogate model using an artificial neural network (ANN) technique was employed. Using the results of the numerical simulation with free-bulging die in LS-DYNA, the surrogate model was constructed by ANN technique. By comparing the z-displacement with respect to the x-axis position in the experiment with the z-displacement in the ANN model, the parameters for the smallest error are obtained. Finally, the acquired parameters were validated by comparing the results of the finite element analysis, the ANN model and the experiment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.1-8
• /
• 1982

In this paper a new analytic method for Ladder networks by weighted tree is proposed. In contrast to conventional tree concept that represents only information structure, in this paper, a tree with hierarchical structure is established by giving wei체t of impedance Z and admittance Y to branch and representing each node of its branch as a pair of voltage and current. Then, by defining generation level from tree structure and by parsing between standand level and arbitrary level, driving point impedance, transfer function and transfer impedance are simultaneously obtained instead of complex calculation method by inspection. The validity of this method is proved by the reciprocal theorem and this method is applied to four-terminal constants and the feedback network.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.706-713
• /
• 2005

Subsurface oceanic data (Z20; Depth of $20^{\circ}C$ isotherm and WWV; Warm Water Volume) from the tropical Pacific Ocean from 1980 to 2004 were utilized to examine upper ocean variations in relation to E1 Nino. Time series analysis using EOF, composite, and cross-correlation methods indicated that there are significant time delays between subsurface oceanic parameters and the Nino3.4 SST. It implied that Z20 and WWV would be more reliable predictors of El Nino events. Based on analyzed results, we also constructed neural network model to predict the Nino3.4 SST from 1996 to 2004. The forecasting skills for the model using WWV were statistically higher than that using the trade wind except for short range forecasting less than 3 months. This model greatly predicted SST than any other previous statistical model, especially at lead times of 5 to 8 months.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.236-239
• /
• 2003

In this paper, we investigate the issues for the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the x-y-z stage are employed as master controller and slave system respectively. In this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of x-y-z stage are proposed. In this paper, inernet network is used for data communication between master and slave. We construct virtual environment of the real convex surface from the force-feedback in controlling the X-Y-Z stage and getting the force applied by the 3-DOF haptic device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.206-212
• /
• 1992

In this paper, a public key cryptosystem for security in computer communication networks is proposed. This is based on the security to a difficulty of factorization. For the proposed public key polynomials and the random intergers, then the ciphertext is computed. The security of proposed public key knapsack cryptosystem is verified with digital simulation.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1716-1724
• /
• 2016

This paper proposes both an active-switched quasi-Z-source inverter (AS-qZSI) and an extended active-switched qZSI (EAS-qZSI), which are based on the classic qZSI. The proposed AS-qZSI adds only one active switch and one diode to the classic qZSI for increasing the voltage boost capability. Compared with other topologies based on the switched-inductor/capacitor qZSI, the proposed AS-qZSI requires fewer passive components in the impedance network under the same boost capability. Additionally, the proposed EAS-qZSI is designed by adding one inductor and three diodes to the AS-qZSI, which offers enhanced boost capability and lower voltage stress across the switches. The performances of the two proposed topologies are verified by simulation and experimental results obtained from a prototype with a 32-bit DSP built in a laboratory.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.161-165
• /
• 2003

In this paper, we investigate the issues on the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the X-Y-Z stage are employed as master controller and slave system respectively. For this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of X-Y-Z stage are presented. In this paper, internet network is used for data communication between master and slave. We construct virtual environment of the real convex surface from the force-feedback in controlling the X-Y-Z stage and measuring the force applied by the 3-DOF haptic device.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.252-255
• /
• 2001

Modern power systems are very complex and to model them completly is impractical for electromgnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of Frequency Dependent Network Equivalent (FDNE). In this paper a method for developing FDNE is presented and demonstrated. The FDNE is generated by Linearized Least Square fitting the frequency response of a z-domain formulation. The advantage of this approach is that a direct implementation occurs which dose not incur errors due to discretization inherent with implementing a fitting function in the s-domain. The developed FDNE is accurate and efficient.