• 한국재료학회지
• /
• 제30권6호
• /
• pp.315-320
• /
• 2020

This study deals with the yielding behavior and strain aging properties of three bake hardening steels with dual-phase microstructure, fabricated by varying the annealing temperature. Bake hardening and aging tests are performed to examine the correlation of martensite volume fraction with yielding behavior and strain aging properties of the bake hardening steels with dual-phase microstructure. The volume fraction of martensite increases with increasing annealing temperature. Room-temperature tensile test results show that the yielding behavior changes from discontinuous-type to continuous-type with increasing volume fraction of martensite due to higher mobile dislocation density. According to the bake hardening and aging tests, the specimen with the highest fraction of martensite exhibited high bake hardening with low aging index because solute carbon atoms in ferrite and martensite effectively diffuse to dislocations during the bake hardening test, while in the aging test they diffuse at only ferrite due to lower aging temperature.

• Steel and Composite Structures
• /
• 제45권4호
• /
• pp.605-619
• /
• 2022

The tensile behavior of the Thread-fixed One-side Bolt (TOB) at high temperatures was studied using the Finite Element Modeling (FEM) to explore the structural responses that could not be measured in tests. The accuracy of the FEM was verified using the test results from the failure mode, load-displacement curve as well as yielding load. Three typical failure modes of TOB connected T-stubs were observed, which were the Flange Yielding (FY), the Bolt Failure (BF) and the Coupling Failure mode (CF). The influence of the flange thickness tb and the temperature θ on the tensile behavior of the T-stub were discussed. The initial stiffness and the yielding load decreased with the increase of the temperature. The T-stubs almost lost their resistance when the temperature exceeded 700℃. The failure modes of T-stubs were mainly decided by the flange thickness, which relates to the anchorage of the hole threads and the bending resistance of flange. The failure mode could also be changed by the high temperature. Design equations in EN 1993-1-8 were modified and verified by the FEM results. The results showed that these equations could predict the failure mode and the yielding load at different temperatures with satisfactory accuracy.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.53-56
• /
• 2003

The disappearance of continuous yielding and the formation of an extended region in engineering stress-strain curves at tempering temperatures of 673-873K is closely related to the reduction of mobile dislocations during tempering and dynamic recovery during tensile deformation. In addition, the occurrence of discontinuous yielding at tempering temperature above 923K would be attributed to the formation of new strain-free polygonal ferrite grain.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.809-815
• /
• 2006

The temperature and loading-rate dependence on the mechanical behavior of single-walled carbon nanotubes under axial compression and torsion is examined with classical molecular dynamics simulation. The critical buckling is found to depend on the temperature and loading-rate. The yielding under torsion is also found to depend on the temperature and loading-rate. But it is shown that the compression and torsional stiffness are independent of the varied temperatures and loading-rates.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1998년도 21세기 한반도 농업전망과 대책(한국작물학회.한국육종학회 공동주관 심포지움 회보)
• /
• pp.210-232
• /
• 1998

Tong-il, the high-yielding rice variety bred on early 1970, effected a turning point in modern rice production in Korea. As rice production reached the highest record yield in 1978 with HYV, Korea achieved self-sufficiency in domestic supply of rice (or the first time in (her own) history, HYV required high input of fertilizers and pesticides for proving its yielding ability and needed new techniques such as early nursery-planting to prevent chilling damage. But, farm economy did not follow the successful achievement of rice production because of increased farming cost and inflation.'Tong-il variety has been replaced by new high-yielding Japonica varieties from 1980 when record-low-temperature during summer months had persisted. Also, the cooked rice of Tong-il variety did not agree with the appetite of Korean people. Though the hectarage of Tong-il rice did reduce, farmers applied the same high-input cultural techniques for new Japonica cultivars as did for Tong-il variety. Heavy application of nitrogen fertilizer contaminated surface and ground water with nitrate ions while phosphorous fertilizer was blamed for algae pollution. Frequent spray of pesticide and herbicide reduced significantly the biotic population in paddy ecosystems including insects and soil microorganisms. The new technologies of the 21st century must be directed to produce safe food, to save natural resources, and to preserve a clean environment for human welfare. We need low-input sustainable farming techniques to provide high-yielding crops and to preserve a healthy ecosystem.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.46-51
• /
• 1983

This study practiced to observe the creep behavior at specific temperature on Austentic SUB 27 stainless steel by Moire method. The results obtained from this study are summarized as follows; In tensile experiment, tensile strength and yielding strength decrease as the temperature increases. Yielding strength is equivalent to 60-70% of tensile strength. Reduction of Area and Elongation show minimum values at 300.deg. C. The results of Moire method using Moire heating resisting grid coincide with LVDT result. Therefor, It is proved that the Moire method has great merit in strain measurement of a creep behavior. In homologous at temp. 0.2 or less, creep behavior is very small amount. But, in more than 0.3, creep behavior is very active. Creep rate increase as temperature increase and creep rate is proportional to .alpha. values of experimental equation.

• 한국식품조리과학회지
• /
• 제27권6호
• /
• pp.745-754
• /
• 2011

To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권2호
• /
• pp.197-202
• /
• 2003

The hot climatic conditions prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids throughout the year, In order to select efficiently the breeds with high temperature tolerance, it is very important to analyze critically the impact of high temperature on many silk yielding attributes of silkworm races. Keeping the above in view, the present study was undertaken to determine the effect of high temperature $(36 {\pm} 1^{\circ}C)$ and high humidity $(80 {\pm} 5% Relative Humidity)$ on the rearing performance of pure races, foundation crosses, single hybrids and double hybrids of bivoltine silkworm, Bombyx mori L. The robust bivoltine breeds, CSR18, CSR19, 8HT and 5HT, eight foundation crosses, eight single hybrids and eight double hybrids involving these breeds were chosen as materials in this study.

• 한국항만학회지
• /
• 제15권1호
• /
• pp.99-105
• /
• 2001

An on-line refractrometer made of easily obtainable materials is built to determine the salinity and temperature of sea water, and its performance is examined by applying the refractometer to known salt solution. Since refractive index and temperature are measured simultaneously, it is possible to compensate the effect of temperature for accurate measurement. The outcome of salinity measurement for the different concentrations of salt solution indicates that the device is suitable for the salinity measurement by yielding stable and reproducible reading.

• 한국강구조학회 논문집
• /
• 제25권2호
• /
• pp.131-139
• /
• 2013

본 연구의 목적은 H-형강 압축재의 온도상승에 따른 파괴거동을 중심으로 압축력과 파괴온도의 상관관계를 파악하기 위한 실험을 수행하는 것이다. SS400 강재로 제작된 H-형강의 시험체를 선정하여, ISO 834의 재하가열 시험방법에 따라 온도 상승에 대한 실험을 한국방재시험연구원(FILK)에서 수행하였다. 고온상태의 강재에 대한 항복강도 및 탄성계수의 감소계수는 EC3 (Eurocode3) Part 1.2 (1993) 관계식을 근거로 하여 파괴온도시 국부 및 전체좌굴 응력도와 항복응력도를 실험결과와 비교 검토하였다. 실험조건은 세장비 45.4이고 상온에서의 항복내력에 대한 50%, 70%, 80%를 재하압축력으로 설정하여 파괴온도를 측정하였다. 파괴온도와 재하압축력에 대한 실험결과로 부터 온도상승에 따른 내력은 탄성 좌굴강도보다는 항복내력에 근접함을 파악할 수 있었다.