• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1939-1941
• /
• 2021

The sputtering yield of tungsten pellets composed of different particle sizes of <1, 12, 44-74, and 149-297 ㎛ was systematically investigated by bombardment with Ar⁺ ions accelerated at 2.0 keV in an ultra-high vacuum chamber. We found that the tungsten sample fabricated from larger particles had a higher surface roughness, based on the surface profile results. Using the data of the surface roughness for the four types of tungsten pellets, we confirmed that the sputtering yield for a tungsten pellet with the highest surface roughness was 7 times lower than that of the lowest surface roughness. This could be due to the redeposition of sputtered tungsten particles onto neighboring asperities.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.719-729
• /
• 2016

The main objective of the present paper is to study the effect of the yield criterion on the magnitude of the strain rate and plastic work rate intensity factors in axisymmetric flow of isotropic incompressible rigid perfectly plastic material by means of a problem permitting a closed-form solution. The boundary value problem consisting of the axisymmetric deformation of a plastic tube is solved. The outer surface of the tube contracts. The radius of the inner surface does not change. The material of the tube obeys quite a general yield criterion and its associated flow rule. The maximum friction law is assumed at the inner surface of the tube. Therefore, the velocity field is singular near this surface. In particular, the strain rate and plastic work rate intensity factors are derived from the solution. It is shown that the strain rate intensity factor does not depend on the yield criterion but the plastic work rate intensity factor does.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.92-94
• /
• 2003

The sputtering yield change of an amorphous Si layer on Si(100) was measured quantitatively for 0.5 keV $O_2^{+}$ and $Ar^{+}$ ion bombardment with in suit MEIS. In the case of 0.5 keV $O_2^{+}$ ion bombardment, at the initial stage of sputtering before surface oxidation, the sputtering yield of Si was 1.4 (Si atoms/$O_2^{+}$) and then decreased down to 0.06 at the ion dose of $3\times10^{16}O_2\;^{+}\textrm{/cm}^2$. In the case of 0.5 keV $Ar^{+}$ ion bombardment, the sputtering yield of Si for the surface normal incidence was 0.56 at the ion dose of 2.5 ${\times}$ 10$^{15}$ $Ar^{+}\textrm{cm}^2$, and rapidly saturated to 1.2 at dose of $7.5\times10^{15}Ar^+\textrm{cm}^2$. For the incidence angle of 80 from surface normal, the sputtering yield of Si was saturated to about 1.4 at the initial stage of sputtering. The surface transient effects, caused by change in sputtering yield at the initial stage of sputtering can be negligible when 0.5 keV $Ar^{+}$ ion at extremely grazing angle was used for sputter depth profiling.g.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2009

This paper deals with the performance evaluation of Barlat's and BBC yield criteria by the directional variation prediction of the yield stresses and the R-values. for the evaluation of yield criteria, three kinds of Aluminum alloys and two kinds of steels were selected and their material properties are from Stoughton and Yoon's work. The experimental data required for the parameter evaluation included the uniaxial yield stresses and R-values (width-to-thickness strain ratio in uniaxial tension) measured in rolling direction, diaganol direction and the transverse direction, the equibiaxial yield stress and the R-value of equibiaxial tension. The optimization method, the Downhill Simplex method, was selected for the coefficient identification of Barlat91, Barlat97 and Barlat2000 yield criteria. Yield surface shapes, yield stress and R-value directionalities of Barlat's and BBC yield criteria were investigated and compared with the experimental data. Barlat2000 and BBC yield criteria were extremely qualified for the shape of the yield surface and the directionality of the yield stresses and the R-values.

• Structural Engineering and Mechanics
• /
• 제22권1호
• /
• pp.17-32
• /
• 2006

The application of cellular materials in load-carrying and security-relevant structures requires the exact prediction of their mechanical behavior, which necessitates the development of robust simulation models and techniques based on appropriate experimental procedures. The determination of the yield surface requires experiments under multi-axial stress states because the yield behavior is sensitive to the hydrostatic stress and simple uniaxial tests aim only to determine one single point of the yield surface. Therefore, an experimental technique based on a uniaxial strain test for the description of the influence of the hydrostatic stress on the yield condition in the elastic-plastic transition zone at small strains is proposed and numerically investigated. Furthermore, this experimental technique enables the determination of a second elastic constant, e.g., Poisson's ratio.

• Composites Research
• /
• 제36권5호
• /
• pp.369-376
• /
• 2023

본 연구에서는 복합소재의 기지재로 활용되고 있는 에폭시 고분자의 가교율이 항복표면에 미치는 영향을 분자동역학 해석을 통해 평가하고자 한다. 분자동역학 해석을 활용하여 가교율에 따른 에폭시 모델을 형성한 후, 상온-대기압 조건하에서 단축 변형 해석 및 평면응력 조건을 고려한 다축 변형 해석을 수행하였으며, 해석 데이터를 통하여 가교율에 따른 영률, 항복점, 항복표면, 그리고 경화지수를 도출하였다. 해석 결과, 영률 및 응력은 기존 선행 연구들에서 조사되었듯이, 가교율에 따라 증가하는 경향을 확인하였다. 다축 변형 시에는, 이러한 가교율과 도출된 응력간의 관계가 하중의 방향에 따라 의존적임을 확인하였는데, 가교율이 증가할수록 단축 인장 영역에 비해, 이축 압축 영역의 항복표면은 빠른 속도 팽창하였으며, 이로 인한 항복표면의 상이함을 관측하였다. 이를 통해, 고분자 소재의 항복 표면의 압력의존성은 소재의 가교 정도에 의존적이며, 항복이 진행될수록, 압력의 존성은 동일 소재 하에서도 변할 수 있음을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제17권10호
• /
• pp.13-22
• /
• 2016

본 연구에서는 가이드라인에 제시된 스퍼드캔의 설계 프로세스에 따라 서남해 연약지반 조건에 최적화된 스퍼드캔의 형상 및 크기를 도출하고, 안정성 평가를 위한 복합하중 작용 시의 항복면을 정의하였다. 이를 위해 일정한 수직하중 작용 시 수평하중과 모멘트 하중을 가하여 수평하중-수평변위, 모멘트-회전변위간의 상관관계를 통해 항복면을 산출하는 프로브 방법을 적용하였다. 분석 결과, 복합하중을 고려한 서남해 지반에서 요구되는 스퍼드캔의 직경은 8m로 나타났으며, 가이드라인에 제시된 지지력 산출경험식을 통해 지지력을 계산할 경우 얕은 심도에서는 비교적 정확한 지지력의 예측이 가능한 것으로 나타났다. 제시된 항복면은 Mohr Coulomb 모델과 Hardening soil 모델을 각각 적용하였을 시 서로 다른 형상을 보였으나, 스퍼드캔의 직경이 증가함에 따라 점차 확장되는 경향을 보였다. 본 연구를 통해 제시된 항복면은 실제 스퍼드캔이 설치될 지역의 지반조사 결과, 가이드라인과 더불어 추후 해상풍력단지 조성 시 스퍼드캔의 안정성 평가에 유용한 참고자료로 활용될 수 있을 것으로 판단된다.

• 한국농공학회지
• /
• 제39권1호
• /
• pp.93-101
• /
• 1997

This paper presents yield surfaces and hardening laws for describing the state of an unsaturated soil under isotropic compression and suction changes. The yield surface is formulated within the framework of hardening plasticity using two independent sets of stress variables : the excess of total stress over air pressure and the suction. And the application of the yield surfaces and hardening laws are confirmed from the result of the experiment. To this end a series of suction-controlled isotropic tests are conducted on clayey soils. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. The specimens are compacted using a half of Proctor compaction energy with 5 % lower of water content than the optimum moisture contents. From test results, existence of the yield surfaces and an application of hardening laws to samples are confirmed by comparison between test and predicted results. And it is confirmed that LC yield locus is extened with the total plastic deformations induced by suction or stress changes, however, SI yield locus is only extended with the plastic deformations by induced suction changes.

• 생명과학회지
• /
• 제13권6호
• /
• pp.794-798
• /
• 2003

라세믹 phenyl oxirane 기질에 대한 asymmetric biohydrolysis 활성이 우수한 Rhodosporidium toruloides SJ-4를 생촉매로 이용하여 입체선택적 가수분해 반응을 통해 라세믹 phenyl oxirane 기질로부터 광학활성 (S)-phenyl oxirane를 회분식으로 생산하는 실험을 수행하였다. (R)-phenyl oxirane 이성질체에 대한 초기 가수분해 속도에 영향을 주는 실험인자들인 pH, 반응온도, DMSO cosolvent 첨가량 등에 대해 중심합성계획법을 이용한 반응표면 분석을 통해 가수분해반응 속도를 향상시킬 수 있는 최적 반응조건을 결정하였다. pH 7.4, 반응온도 34℃ 및 DMSO 첨가량 2.3%(v/v)의 조건에서 라세믹 기질 초기 농도 100mM로부터 약 10시간 정도의 반응을 통해 ee 값이 100%인 광학적으로 순수한 (S)-phenyl oxirane를 24% 정도 (이론수율 = 50%)의 높은 수율로 얻을 수 있었다. ^u Batch production of (S)-phenyl oxirane was investigated using epoxide hydrolase activity of Rhodosporidium toruloides SJ-4. Effect of reaction condition of asymmetric biohydrolysis of racemic phenyl oxirane was analyzed and optimized by response surface methodology. The optimal conditions of pH, temperature and DMSO cosolvent ratio were 7.4, 34 ℃, and 2.3%(v/v), respectively. The final yield was enhanced up to 67%, and reaction times required to reach 99% ee (enatiomeric excess) decreased down to 50% by response surface methodology Enantiopure (S)-phenyl oxirane with 100% enantiopurity and 24% yield (theoretical yield = 50%) was obtained from racemic substrate.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.413-423
• /
• 1991

Multiaxial loading by combinations of tension-torsion-internal pressure have been applied to the thins-walled tubular specimens prepared from cold drawn tubes of SAE 1020 steel. Prior to the multiaxial loading, each specimen has been twisted to different shear strains. Uniaxial tensile yield stresses measured at different angles to the tube axis clearly show that the initial orthotropic symmetry is maintained during twisting. The orthotropy axes are observed to rotate with shear strains. The plane stress yield locus measured for each twisted specimens show that yield surface shape does not remain similar during twisting and thus anisotropic work hardening is not a function of only plastic work.