1 |
Alexandrov, S. (2009), "The strain rate intensity factor and its applications: a review", Mater. Sci. Forum, 623, 1-20.
DOI
|
2 |
Alexandrov, S.E. and Goldstein, R.V. (2015), "On constructing constitutive equations in metal thin layer near friction surfaces in material forming processes", Doklady Physics, 60(1), 39-41.
DOI
|
3 |
Alexandrov, S. and Jeng, Y.R. (2013), "Singular rigid/plastic solutions in anisotropic plasticity under plane strain conditions", Cont. Mech. Therm., 25(5), 685-689.
DOI
|
4 |
Alexandrov, S., Jeng, Y.R. and Hwang, Y.M. (2015), "Generation of a fine grain layer in the vicinity of frictional interfaces in direct extrusion of AZ31 alloy", ASME J. Manuf. Sci. Eng., 137(5), Paper 051003.
DOI
|
5 |
Spencer, A.J.M. (1965), "A theory of the failure of ductile materials reinforced by elastic fibres", Int. J. Mech. Sci., 7, 197-209.
DOI
|
6 |
Trunina, T.A. and Kokovkhin, E.A. (2008), "Formation of a finely dispersed structure in steel surface layers under combined processing using hydraulic pressing", J. Mach. Manuf. Reliab., 37(2), 160-162.
DOI
|
7 |
Warren, A.W. and Guo, Y.B. (2005), "Numerical investigation on the effects of machining-induced white layer during rolling contact", Tribology Tran., 48(3), 436-441.
DOI
|
8 |
Alexandrov, S. and Richmond, O. (2001), "Singular plastic flow fields near surfaces of maximum friction stress", Int. J. Nonlin. Mech., 36(1), 1-11.
DOI
|
9 |
Alexandrov, S. and Lyamina, E. (2006), "Prediction of fracture in the vicinity of fiction surfaces in metal forming processes", J. Appl. Mech. Techn. Phys., 47(5), 757-761.
DOI
|
10 |
Alexandrov, S. and Mustafa, Y. (2014), "The strain rate intensity factor in the plane strain compression of thin anisotropic metal strip", Meccanica, 49(12), 2901-2906.
DOI
|
11 |
Choi, Y. (2010), "Influence of a white layer on the performance of hard machined surfaces in rolling contact", Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224(8), 1207-1215.
DOI
|
12 |
Griffiths, B.J. (1987), "Mechanisms of white layer generation with reference to machining and deformation processes", ASME J. Tribology, 109(3), 525-530.
DOI
|
13 |
Griffiths, B.J. and Furze, D.C. (1987), "Tribological advantages of white layers produced by machining", ASME J. Tribology, 109(2), 338-342.
DOI
|
14 |
Hosford, W.F. (1972), "A generalized isotropic yield criterion", Tran. ASME J. Appl. Mech., 39, 607-609.
DOI
|
15 |
Kajino, S. and Asakawa, M. (2006), "Effect of "additional shear strain layer" on tensile strength and microstructure of fine drawn wire", J. Mater. Proc. Technol., 177, 704-708.
DOI
|
16 |
Murai, T., Matsuoka, S., Miyamoto, S. and Oki, Y. (2003), "Effects of extrusion conditions on microstructure and mechanical properties of AZ31B magnesium alloy extrusions", J. Mater. Proc. Technol., 141, 207-212.
DOI
|
17 |
Shield, R.T. (1955), "Plastic flow in a converging conical channel", J. Mech. Phys. Solid., 3, 246-258.
DOI
|