• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.305-330
• /
• 2023

Unlike NATM tunnels, Shield TBM tunnels have split linings. Therefore, the stress distribution of the lining is different even if the lining is under the same load. Representative methods for analyzing the stress generated in lining in Shield TBM tunnels include Non-joint Mode that does not consider connections and a 2-ring beam-spring model that considers ring-to-ring joints and segment connections. This study is an analysis method by Break-joint Mode. However, we do not consider the structural role of segment lining connections. The effectiveness of the modeling is verified by analyzing behavioral characteristics against vibration loads by modeling with segment connection interfaces to which vertical stiffness and shear stiffness, which are friction components, are applied. Unlike the Non-joint mode, where the greatest stress occurs on the crown for static loads such as earth pressure, the stress distribution caused by contact between segment lining and friction stiffness produced the smallest stress in the crown key segment where segment connections were concentrated. The stress distribution was clearly distinguished based on segment connections. The results of static analysis by earth pressure, etc., produced up to seven times the stress generated in Non-joint mode compared to the stress generated by Break-joint Mode. This result is consistent with the stress distribution pattern of the 2-ring beam-spring model. However, as for the stress value for the train vibration load, the stress of Break-joint Mode was greater than that of Non-joint mode. This is a different result from the static mechanics concept that a segment ring consisting of a combination of short members is integrated in the circumferential direction, resulting in a smaller stress than Non-joint mode with a relatively longer member length.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.189-195
• /
• 2022

Purpose: For orthodontic bracket bonding, light curing resin cement is widely used because the process is convenient, and it can be polymerized at the desired time. This study compared the difference of bonding strength of orthodontic resin cement according to storage condition. Materials and Methods: After acid etching the bovine enamel surface with 37% phosphoric acid, 15 orthodontic brackets for mandible incisors were bonded with Ortho Connect and Orthomite LC according to following three conditions; 1) Immediate after 4℃ refrigeration for 3 months (IR), 2) One day room temperature after 4℃ refrigeration for 3 months (OR), 3) Room temperature for 3 months (RT). The shear bond strength was measured with a universal material tester and failure pattern of the specimen was observed. Two-way ANOVA and One-way ANOVA were used at the 95% significance level. Results: Ortho Connect that was applied immediately after refrigeration showed the maximum shear bond strength. Orthomite that was applied immediately after refrigeration showed the lowest shear bond strength, and the group stored at room temperature for three months showed the highest shear bond strength, and the difference between the two groups was significant. Conclusion: Ortho Connect can be used without worrying about bond strength even if it is used immediately after refrigeration, but Orthomite should be kept at room temperature sufficiently after refrigeration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Journal of Korean Historical Folklife
• /
• no.33
• /
• pp.31-72
• /
• 2010

At first, I extract materials on folk religion from four encyclopedic literatures of late Chosun dynasty-Lee, Ji-Bong-Ryu-Seol(『芝峯類說』) by Soo-Kwang(李晬光), San-Lim-Kyung-Jae(『山林經濟』) by Hong, Man-Sun(洪萬選), Sung-Ho-Sa-Seol(『星湖僿說』) by Lee-Ik(李瀷), O-Ju-Yeon-Moon-Jang-Jun-San-Go(『五洲衍文長箋散稿』) by Lee, Kyu-Kyung(李圭景), and present these materials by tables. Second, I examined the contents and characters of these materials on folk religion. The conclusions from this research are as follows. ① There are common features and points of difference between these four encyclopedic literatures. One of common features are that all these four are encyclopedic works, but San-Lim-Kyung-Jae is more practical than another three. ② These encyclopedic literatures regard folk religion as a negative culture, because these literatures based on Confucianism. But they did not deny miraculous virtues of folk religion. ③ These encyclopedic literatures give us many informations on gods and spirits of Korean folk religion, i.e. city gods(城隍神)·Yup-Sin(업신)·spirits of disease, god Kim-Bu(金傅大王神)·god Jung-Duk-Yang(鄭得揚)·god of King Kuan-u(關王神)·god Bu-keun(付根神) etc. So I review these gods and spirits referenced in encyclopedic literatures. ④ These encyclopedic literatures show much interest in ghost in common. The reason of interest is that authors of these encyclopedic literatures are all scholars of Sung Confucianism and Sung Confucian was concern about ghost. The Sung Confucianism denied the ghost as personal being whom Korean folk religion regards to a kind of spirits. Instead of beliefs in ghost of folk religion, they insist on the ghost as Ki(氣), a kind of cosmic principle. But these encyclopedic literatures acknowledge some parts of folk religion's beliefs in ghost, because they admit the miraculous virtues of these parts. ⑤ There are many items on divination in these encyclopedic literatures. But they show dual attitude on divinations. The one is negative attitude to divinations on individual destiny and the other one is positive attitude to divinations on agriculture. ⑥ There are also many items on witchcrafts in these encyclopedic literatures. Through these items, I assumed pervasiveness of beliefs on witchcraft at that time. ⑦ Shamans, as religious specialist, are stand on a central position of Korean folk religion. So it is a matter of course that these encyclopedic literatures concerned on Korean shaman. As Confucians, authors of these encyclopedic literatures did not regards shamans as positive one. But they did not deny miraculous virtues of shamans. In spite of these encyclopedic literatures have negative view points to, and include false informations Korean folk religion, I would like to emphasis on importance of these encyclopedic literatures to understand Korean folk religions, especially Korean folk religions of late Yi Dynasty.

• The Journal of Korean Philosophical History
• /
• no.28
• /
• pp.267-296
• /
• 2010

There exists various advantages and disadvantages with various thoughts in human beings. Therefore, it causes very complicated conflict by these diversity. It would be impossible if there would not be solved in classes, areas, schools, cultures whether it is simple or complicated. The proposition which totally shows these logic are Cheng-Yi(程頤, 1033-1107)'s principle is one but its manifestations are many(理一分殊) and Yul-gok(栗谷, 1536-1584)'s all penetrating Li and defining Ch'i. The main concern is how to realize concretly the pure goodness in theory of principal and vital force. There are opinion which Li shows it's pure goodness initiatively and it only has to be shown through Ch'i. Toi-gyeo(退溪, 1501-1570)and Woo-dam(愚潭, 1625-1707) thought the subjectivity lies on Li which shows itself even though Li can't shows itself. On the while, Yul-gok thought it realize through Ch'i, and Li has the superintendence which Li shows itself through Ch'i. Regardless with above, Nok-mun(鹿門, 1711-1788) had the point of view which pure goodness come to realize by the coincidence of Li and Ch'i, on the same time, it didn't matter whether the subjectivity lay on Li or Ch'i, Li showed by nature while Ch'i did by vital energy controlled and worked together. While Yul-gok established his theoretical ground of universality in the best pure good and its bases on the realization, Woo-dam put an emphasis on the practice and realization of goodness to endow with its positive meaning. On the contrary of it, Nok-mun emphasised vital enerty, that is, enabled to realize goodness which premised Li and Ch'i are reciprocally related to other in non-segregated condition(理氣不相離). Still however, the most important thing is how the rightness can be concreately explained which human have to practice its pure goodness. It is not restricted on the Sung Confucianism, it is the material question in philosophy.

• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.79-102
• /
• 2011

Researchers in channel dyads have devoted much attention to relationship between interdependence (i.e. interdependence enymmetry and total interdependence) and conflict that promote channel performance. In social science, in spite of the inconsistent results in marketing practice, there are two contradictory theories explain the relationship between interdependence and conflict - bilateral deterrence theory and conflict spiral theory. The authors apply these theories to co-marketing alliance situation in terms that this relationship is also incorporated both company's dependence, either from one company's perspective or each partner about its respective dependence. Using survey data and archival data from 181 companies enlisted in a telecommunication membership program, the authors find out the relationship between interdependence and conflict as well as investigate the antecedents of interdependence - transaction age, transaction frequency, the numbers of alliance partner, and co-marketing alliance specific assets according to previous researches. Using PLS analysis, the authors demonstrate that, with increasing total interdependence in a telecommunication membership program, two co-marketing partners' conflict level is increased in accord with the author's conflict spiral theory predictions. As expected, higher interdependence asymmetry has negative value to level of conflict even though this result is not statistically significant. Other findings can be summarized as follows. In the perspective of telecommunication company, transaction age, transaction frequency, and co-marketing alliance specific assets have influence on its dependence on a partner as independent variables. To the contrary, in a partner's perspective, transaction frequency, co-marketing alliance specific assets and the numbers of alliance partner have significantly impact on its dependence on a telecommunication company. In direct effect analysis, it is shown that transaction age, frequency and co-marketing alliance specific assets have direct influence on conflict. This results suggest that it is more useful for a telecommunication company to select a co-marketing partner which is frequently used by customers and earned high rates of mileage. In addition, the results show that dependence of a telecommunication company on a co-marketing partner is more significantly effected to co-marketing alliance conflict than partner's one. It provide an effective conflict management strategy to a telecommunication company for controling customer's usage rate or having the co-marketing partner deposit high level of alliance specific investment (i.e. mileage). To a co-marketing partner of telecommunication company, it is required control the percentage of co-marketing sales in total sales revenue or seek various co-marketing partners in order for co-marketing conflict management. The research implications, limitation and future research of these results are discussed.

• Asia Marketing Journal
• /
• v.12 no.4
• /
• pp.165-181
• /
• 2011

In 2005, Yuhan Kimberly found interesting points in the existing customers' U&A survey on the kitchen towel. The usage of Korean consumers is usually restricted to getting rid of the oil from the fans and the fried food. This usage limits could be the barrier to the diffusion of kitchen towel. Although consumers were worried about the hygiene situations about the dishcloth, they also percieved that the existing paper kitchen towels were short of something to soothe their inconveniences. As a result, the company made a decision to seek out the solution for the consumers' worries. The relative shortage of the paper kitchen towel compared to that of the unhygienic and inconvenient dishcloth was its lack of water-endurance. The dishcloth could be reliable in the wet environment which is very common in Korean kitchen, whereas the paper kitchen towel was perceived as very weak and unreliable in removing water form the dishes and the sink. To overcome the common sense of the consumers, it is important to shift the consumers' perception of the kitchen towel category. It is needed to expand the usage time from one time to several times in a day. So it is needed to redesign the customers' kitchen life. The company adopted the brand "Scott^®" to meet the global brand strategy of the parent company, Kimberley Clark. This brand was also adopted and made a succesful launch of the similar product lines in Latin America. Furthermore, to make an emphasis on the differentiation from the existing paper kitchen towels, the company made the slogan, "Scott^® washable kitchen towel." This slogan was designed to expand the familiar product image of convenient paper towels to water-resistance. As a result, consumers show the changes in usage behavior of paper towels and apply them for more various purposes such as cleaning the decks and tables. This change results in the rapid sales increase of "Scott^® washable kitchen towel."

• Asia Marketing Journal
• /
• v.9 no.1
• /
• pp.23-41
• /
• 2007

The current study analyzed the relationship between expression type of humor ads and their advertising effects and the differences in advertising effects by expression type according to temperament as categorized by the Myers-Briggs Type Indicator (MBTI). Expression type of humor was classified into arousal-, incongruity-, and superiority-type humor ads. Advertising effects were measured by consumers' cognitive, affective, and conative responses. Three ads were created based on expression type of humor. A personality type, as measured by the MBTI, was categorized into four types of temperament, namely SP, SJ, NF, NT and used as moderating variables. As a result, the advertising effects varied according to the expression type of humor advertising. Interaction effects between ad expression type and temperament on ad feeling and ad preference were also found.