• Journal of Plant Biotechnology
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2006

The goal of this research was to develop an efficient cryopreservation protocol for germplasms of yam (Diosorea batatas), that were cultivated in Korea. Comparative studies with four other cryogenic techniques and subsequent experiments for shoot regrowth were conducted. in vitro-grown shoot-apices of the D. batatas were successfully cryopreserved by encapsulation-dehydration. The maximum survival of shoot-apices could be achieved when the precultured (with 0.3 M of sucrose for one day) and encapsulated (with a 3%(w/v) Na-alginate solution) apices were dehydrated for $3.5{\sim}4\;h$ prior to direct immersion in LN (liquid nitrogen). The frequency of regrowth rate of cryopreserved apices was not decreased during 3-month storage period. The thawing method markedly affected survival of the cryopreserved apices, and thawing at $40^{\circ}C$ for 3 min produced the best results. When cryopreserved apices were post-cultured on the post-culture medium (MS), supplemented with $0.2mgl^{-1}$ of BA ($N_6$-benzyladenine) and $0.2mgl^{-1}$ of kinetin, they showed direct shooting without callusing.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.232-236
• /
• 2006

This study was carried out to establish of hydroponic culture system for year-round mass production of yam and for supply of disease-free seed tubers from the superior yam species. There were not difference in tuber weight between 9 hrs photoperiod(640mg) and natural photoperiod(600mg). However, longer photoperiod than 9 hrs such as 12 hrs and 15 hrs decreased tuber weight to 490 and 500g, respectively, which sugested that long photoperiod showed adverse effect for tuber enlargement. Tuber enlargement of Dioscorea opposite according to ionic strength was higher at 50% nutrient of Sanyak's standard solution. The optimal concentration of NAA for the best tuber growth showed at 100mg/L as a 560mg while control showed a relatively lower tuber growth(350mg).

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.765-771
• /
• 2004

This study surveys the warp and weft tension differences among 3 types of rapier looms and analyses the mechanical properties of worsted fabrics for garment with relation of these looms characteristics using KES-FB system. Raper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yam and 1/30 Nm worsted weft yam by rapier looms such as FAST-R, THEMA-11-E and PICANOL-GTX respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.38-44
• /
• 2019

This study was conducted to establish a domestic cultivation system of a newly introduced yam bean (Pachyrhizus erosus L.). Growth and yield were investigated in response to various cultural practices, such as seedling raising, planting distance, pinching, and flower pruning. Optimum conditions for raising of seedling were an average temperature of $22^{\circ}C$ for 30 days. Considering of the raising efficiency and the convenience of transplanting, 128 cells per tray was a suitable size. When pinching at a height of 120 cm from late July to early August, yield increased by 22% compared to no pinching. Flower pruning between late August and early September increased the number of tubers and tuber yield by 32% in comparison with no flower pruning. Yam bean seedlings planted at $50cm{\times}30cm$ spacing resulted in 30% yield increase as compared to wider spacing of $100cm{\times}30cm$. Our results thus suggested that the optimal combination of cultural practices ($50{\times}30cm$ planting distance, pinching at 120 cm height, and one time of flower pruning) increase profitability by 107%. All these results suggest high possibility of yam bean as a new income crop in Korea.

• Journal of the HCI Society of Korea
• /
• v.4 no.1
• /
• pp.29-34
• /
• 2009

The food culture has been advanced with technical developments. The technical advances of food refrigeration and refrigerated transport system enable people to enjoy raw and fresh foods in the middle of dessert and in current days the development of information technology helps people to get variable information as like the information of food stuffs, freshness, the history of cooking, other useful information. We need to research the information architecture of food culture, which means Information technology grafts on the food culture, to provide diverse services that information technology utilized. As the first step of our research, we define the context of food culture for integration of food culture and Information technology, and find out the relationships between each factors. This research is considered the food culture as a medium between human to human relationships and the food, and redefined it with a relationship viewpoint. We've selected Yam cha that is one of the famous foods in southern China as a research item and referenced data that we researched with students in Guangzhou College of Art, China.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.47-54
• /
• 2005

This study was carried out to establish the hydroponics production method for year-round cultivation of yam and to establish the mass production system of disease-free seed tubers from the superior yam species through water culture. There were no difference in tuber weight between 9 hr photoperiod(640mg) and natural photoperiod(600mg). However, longer photoperiod such as 12hr and 15hr decreased tuber weight to 490 and 500g, respectively, indicating that long photoperiod effects adversely tuber enlargement. Dioscorea opposita which was grown with hydroponics effected markedly tuber enlargement at 50% nutrient of Sanyak's standard solution. Hormone treatment of NAA 100ppm resulted in the best tuber growth(560mg) while control showed a relatively lower tuber growth(350mg).

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.105-114
• /
• 2014

We established a high throughput screening system of African yam tuber lines which contain high contents of total carotenoids, flavonoids, and phenolic compounds using ultraviolet-visible (UV-VIS) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy in combination with multivariate analysis. The total carotenoids contents from 62 African yam tubers varied from 0.01 to $0.91{\mu}g{\cdot}g^{-1}$ dry weight (wt). The total flavonoids and phenolic compounds also varied from 12.9 to $229{\mu}g{\cdot}g^{-1}$ and from 0.29 to $5.2mg{\cdot}g^{-1}$dry wt. FT-IR spectra confirmed typical spectral differences between the frequency regions of 1,700-1,500, 1,500-1,300 and $1,100-950cm^{-1}$, respectively. These spectral regions were reflecting the quantitative and qualitative variations of amide I, II from amino acids and proteins ($1,700-1,500cm^{-1}$), phosphodiester groups from nucleic acid and phospholipid ($1,500-1,300cm^{-1}$) and carbohydrate compounds ($1,100-950cm^{-1}$). Principal component analysis (PCA) and subsequent partial least square-discriminant analysis (PLS-DA) were able to discriminate the 62 African yam tuber lines into three separate clusters corresponding to their taxonomic relationship. The quantitative prediction modeling of total carotenoids, flavonoids, and phenolic compounds from African yam tuber lines were established using partial least square regression algorithm from FT-IR spectra. The regression coefficients ($R^2$) between predicted values and estimated values of total carotenoids, flavonoids and phenolic compounds were 0.83, 0.86, and 0.72, respectively. These results showed that quantitative predictions of total carotenoids, flavonoids, and phenolic compounds were possible from FT-IR spectra of African yam tuber lines with higher accuracy. Therefore we suggested that quantitative prediction system established in this study could be applied as a rapid selection tool for high yielding African yam lines.

• Journal of Information Processing Systems
• /
• v.13 no.4
• /
• pp.834-851
• /
• 2017

The amount of sources of information available on the web using ontologies as support continues to increase and is often heterogeneous and distributed. Ontology alignment is the solution to ensure semantic interoperability. In this paper, we describe a new ontology alignment approach, which consists of combining structure-based and reasoning-based approaches in order to discover new semantic correspondences between entities of different ontologies. We used the biblio test of the benchmark series and anatomy series of the Ontology Alignment Evaluation Initiative (OAEI) 2012 evaluation campaign to evaluate the performance of our approach. We compared our approach successively with LogMap and YAM++ systems. We also analyzed the contribution of our method compared to structural and semantic methods. The results obtained show that our performance provides good performance. Indeed, these results are better than those of the LogMap system in terms of precision, recall, and F-measure. Our approach has also been proven to be more relevant than YAM++ for certain types of ontologies and significantly improves the structure-based and reasoningbased methods.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.21-24
• /
• 2005

Three dimensional circular braided Glass/Aramid hybrid fabric/epoxy resin composite was fabricated. FBG sensor was embedded along the braid yam in order to monitor the internal dimensional changes of the 3-D braid composite. The amount of cure and thermal shrinkage of epoxy resin was also determined using FBG sensor system. FBG sensors with different grating length were embedded and their response were compared. The thermo-optic coefficient of FBG sensor was measured by several preliminary experiments. The internal strain that measured by FBG sensor and electric strain gauge was compared during compressive test. The released residual strain of the fabricated tubular composite was estimated using cutting method. The internal strain of the composite was estimated using FBG sensor system, and the result was compared with the value from electric strain gauge. It was found that FBG sensor system is a very useful technique to investigate inside region of complicated structure.