• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.211-212
• /
• 2012

ZnO submicron particles were grown on Au-catalyzed Si substrate by a vapor phase transport (VPT) growth process under different mixture gas ratio at growth temperature of $900^{\circ}C$. The structural and optical properties of the ZnO submicron particles were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL). The ZnO submicron particles could be clustered with the $O_2/Ar$ mixture gas ratio(%) higher than 10%, and it was mainly determined by the gas ambient. Particularly, when the $O_2/Ar$ mixture gas ratio was 30%, it was observed the ZnO submicron particles with diameters in the range of 125 to 500 nm and the narrowest full width at half maximum (FWHM) of XRD and PL spectra with $0.121^{\circ}$ and 92 meV, respectively. It was found that the structural and optical properties of the ZnO submicron particles were improved with increasing the $O_2/Ar$ mixture gas ratio through the XRD and PL spectra.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.211-214
• /
• 2011

In the present work, a computational study was conducted to investigate characteristic of lateral force on the flow fields inside the propulsion nozzle with step. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST k-${\omega}$ turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the shut-down process of the engine, NPR is varied from 100.0 to 10.0. It is observed that the separation point and Mach-disk strongly depend on the variation of NPR, and adjusting the step lead to significantly different characteristics in the lateral forces.

• Korean Journal of Optics and Photonics
• /
• v.27 no.6
• /
• pp.203-211
• /
• 2016

We have studied the hybrid method for reconstructing apodized chirped fiber Bragg gratings, using both an analytic estimation of grating parameters and an optimization algorithm. The Hilbert transform of the reflection spectrum was utilized to estimate grating parameters, and then the layer-peeling algorithm was used to obtain refined parameter values by the differential-evolution optimization process. Calculations for a fiber Bragg grating with wavelength chirp rate 2 nm/cm were obtained with an accuracy of $6{\times}10^{-5}nm/cm$ for the chirp rate and $3{\times}10^{-9}nm/cm$ for the index modulation, with much improved calculation speed and high reliability.

• Microbiology and Biotechnology Letters
• /
• v.7 no.4
• /
• pp.211-216
• /
• 1979

Air lift fermentor (ALF) is widely used for production of single-cell protein (SCP) from hydrocarbon and other carbon sources, because oxygen transfer efficiency is believed to be superior in the ALF to that in other conventional fermentors. However, the performance of ALF in terms of mixing is somewhat questionable. In this research, we studied about the performance of the ALF in SCP production using methanol fermentation process as a model system. The results show that ALF could be employed for SCP production or other fermentation processes when substrate is miscible and used at low concentration. With a high substrate concentration, it must be operated under high pressure or low dilution rate to meet the adequate oxygen transfer requirement.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.4
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.205-211
• /
• 2014

With a development of modern industry, demand for electric power is rapidly increasing and the capacity of power transfer is required to become bigger and bigger. At power station, the high-voltage power cable is used as the only method in order to transfer electric power. In this paper, we have analyzed the deterioration characteristics of 6.6kV power cable systems in operation. For the time duration of 2000 days, we have measured the cable in operation in order to extract the data for the deterioration characteristics. By analyzing the data by means of several steps of filtering processes, we could obtain the linear relations of insulation resistances as a function of time. Furthermore, we can verify that the progress characteristics in deterioration process of 6.6kV power cable systems follows the process of heat deterioration.

• The Journal of Information Systems
• /
• v.15 no.3
• /
• pp.187-211
• /
• 2006

As port competitiveness is becoming more important in the global market environment RFID (Radio Frequency Identification) Is also becoming a crucial enabler In implement efficient visible, secure and productive ports. However there Is a lack of practical validated RFID technology acceptance cases in the port logistics industry until now, even though various related projects have been undertaken. In this study, we applied 13.56MHz passive RFID readers, tags, and their applications into existing bar-code based gate systems to improve the port logistics process, and we analyzed results of a pilot test in economic and non-economic perspectives. The main purpose of this study is to develop the RFID based automatic gate passing system in container terminals, and is to validate its economic and non-economic feasibility. In order to accomplish the purpose of this study, first, we examined previous researches on RFID technology acceptance in the port logistics industry, second, we Identified and analyzed the business process of existing gate systems in container terminals, third, we build RFID gate systems with 13.56Mhz tags, readers, and its middle-ware, finally we tested the system and its performance. The results were successful and showed the feasibility of the system in real container terminal gates. Economic and non-economic contribution was confirmed. Although the system has technological limitations with short range passive type, we clearly identified its potential capability and its economic validity in the field, which are the implications of this study.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.195-211
• /
• 2005

The purpose of this case study is to suggest the indicators of an informatization maturity level and critical success factors in small and medium automotive parts manufacturers. To achieve this goal, literature reviews and case studies on 7 automotive parts manufacturers that confirmed to implement information systems successfully, were conducted. Based on literature review, the six functional processes including development, production scheduling, purchase, production, order, and support process, were defined. Each process has 5 levels from 1(low level) to 5(high level) depending on the degree of informatization maturity. In addition, critical success factors were discovered with interviews of CEO or CIO. The results of this study can be applied to any companies which are implementing or intended to the information systems near future.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.203-211
• /
• 2018

Issues with past practice in seismic hazard analysis of nuclear power plant sites in Korea are addressed. Brief review on both deterministic and probabilistic methods in seismic hazard analysis is given, and most of the continuing discussion is focussed on the probabilistic seismic hazard analysis. Causes of uncertainty are traced on the basis of the cases that the assessment methodology was applied to the nuclear power plant sites. Considerations on the assessment include the role of experts, a representative seismic catalog, seismic source zonation, earthquake ground-motion relationship, and evaluation process. Factors increasing uncertainty in each item are analyzed and some feasible solutions are discussed.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.202-211
• /
• 2013

The research is based on the theory of cognitive psychology that a decision maker creates an internal belief through environment information process and that personal behavior is determined as a means of belief practice. This study implemented a language network analysis to understand the 16th President Noh Moo-hyun"s real estate policy belief who was a key decision maker of Korea. The results of this study are as follows. First, the chief variables of real estate policy recognized by president Rho Mu Hyun included civil economy and real estate speculation and so on. Second, the chief variables of real estate policy recognized by president Rho Mu Hyun did indicate weak correlation with other diverse economic variables. Third, the analysis shows that in practicing the real estate policy, excessive civil economy related with the real estate policy and the obsession with civil life variables worked as reason to pursue social contest rather than social agreement. It is thought that this study result will contribute to policy theory in explaining the policy decision-making process from the perspective of cognitive psychology.