• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.456-461
• /
• 2012

본 연구에서는 글리세롤과 우레아를 이용하여 글리세롤카보네이트를 합성하는 반응을 진행하였다. ZnO와 Zn-Al 이원계 금속 산화물 촉매를 제조하고, 제조되어진 촉매를 사용하여 글리세롤의 전환율과 글리세롤카보네이트의 수율을 확인하였고, Al의 첨가에 따른 촉매 특성의 분석과 글리세롤카보네이트 합성반응에서의 역할에 대해 확인하였다. 글리세롤카보네이트 합성 반응에서 ZnO를 단독으로 촉매를 사용한 경우보다 Zn-Al 혼합 산화물을 촉매로 사용하여 반응하였을 때, 부반응이 억제되어 전환율 및 수율이 증가함을 확인하였다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.267-272
• /
• 2002

The production of micro components is one of the leading technologies in the fields of information and communiation, medical and biotechnology, and micro sensor and micro actuator system. Microfabrication (micromachining) techniques such as X-ray lithography, electroforming, micromolding and excimer laser ablation are used for the production of micro components out of silicon, polymer and a limited number of pure metals or binary alloys. However, since the first development of microfabrication technologies there have been demands for the cost-effective replication in large scale series as well as the extended range of available material. One such promising process is micro powder injection molding (PIM), which inherits the advantages of the conventional PIM technology, such as low production cost, shape complexity, applicability to many materials, applicability to many materials, and good tolerance. This paper reports on a fundamental investigation of the application of W-Cu powder to micro metal injection molding (MIM), especially in view of achieving a good filling and a safe removal of a micro mold conducted in the experiment. It is absolutely legitimate and meaningful, at the present state of the technique, to continue developing the micro MIM towards production processes for micro components.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.178-182
• /
• 1999

Simple binary $Na_2S-SiO_2$ oxysulfide glasses were prepared by a conventional melt-quench method in order to investigate the role of sulfur in glass structure and the electronic state. By X-ray photoelectron spectroscopy(XPS) measurement, S2p binding energy of the glass was observed at approximately 161eV which was close to that of ionic $S^{2-}$. The coordinating state around silicon atoms were investigated by ${29}^Si$ MAS-NMR measurement. The chemical shift observed from NMR supported that sulfur atom was joined to a silicon atom by substituting for an oxygen atom and was present as a non-bridging sulfide ion in low alkali content. On the other hand, it could be presumed that a portion of sulfur anions existed in an isolated state from the glass-network frame at high alkali content. The state of these sulfurs was also studied by Raman spectroscopy in detail.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.161-176
• /
• 2021

In this study, the electrochemical behavior of Sm on the binary liquid Al-Ga cathode in the LiCl-KCl molten salt system is investigated. First, the co-reduction process of Sm(III)-Al(III), Sm(III)-Ga(III), and Sm(III)-Ga(III)-Al(III) on the W electrode (inert) were studied using cyclic voltammetry (CV), square-wave voltammetry (SWV) and open circuit potential (OCP) methods, respectively. It was identified that Sm(III) can be co-reduced with Al(III) or Ga(III) to form Al_zSm_y or Ga_xSm_y intermetallic compounds. Subsequently, the under-potential deposition of Sm(III) at the Al, Ga, and Al-Ga active cathode was performed to confirm the formation of Sm-based intermetallic compounds. The X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analyses indicated that Ga₃Sm and Ga₆Sm intermetallic compounds were formed on the Mo grid electrode (inert) during the potentiostatic electrolysis in LiCl-KCl-SmCl₃-AlCl₃-GaCl₃ melt, while only Ga₆Sm intermetallic compound was generated on the Al-Ga alloy electrode during the galvanostatic electrolysis in LiCl-KCl-SmCl₃ melt. The electrolysis results revealed that the interaction between Sm and Ga was predominant in the Al-Ga alloy electrode, with Al only acting as an additive to lower the melting point.

• 천문학회지
• /
• 제52권4호
• /
• pp.133-144
• /
• 2019

We develop forecast models of daily probabilities of major flares (M- and X-class) based on empirical relationships between photospheric magnetic parameters and daily flaring rates from May 2010 to April 2018. In this study, we consider ten magnetic parameters characterizing size, distribution, and non-potentiality of vector magnetic fields from Solar Dynamics Observatory (SDO)/Helioseismic and Magnetic Imager (HMI) and Geostationary Operational Environmental Satellites (GOES) X-ray flare data. The magnetic parameters are classified into three types: the total unsigned parameters, the total signed parameters, and the mean parameters. We divide the data into two sets chronologically: 70% for training and 30% for testing. The empirical relationships between the parameters and flaring rates are used to predict flare occurrence probabilities for a given magnetic parameter value. Major results of this study are as follows. First, major flare occurrence rates are well correlated with ten parameters having correlation coefficients above 0.85. Second, logarithmic values of flaring rates are well approximated by linear equations. Third, using total unsigned and signed parameters achieved better performance for predicting flares than the mean parameters in terms of verification measures of probabilistic and converted binary forecasts. We conclude that the total quantity of non-potentiality of magnetic fields is crucial for flare forecasting among the magnetic parameters considered in this study. When this model is applied for operational use, it can be used using the data of 21:00 TAI with a slight underestimation of 2-6.3%.

• 전기화학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 1998

중간온도$(700\~800^{\circ}C)$형 고체산화물 연료전지(solid oxide filet cells)의 양극재료로 이용을 목표로 $Gd_{0.8}Ca_{0.2}Co_{1-x}Fe_xO_3,\;(x=0.0\~0.5)$ 분말을 합성하고 이의 열적 안정성, 전도특성을 조사하였다. 또한 이를 CGO(Cerium-Gadolinium Oxide) 전해질 디스크에 부착하여 양극특성을 조사하였다. 양극재료를 구연산 법에 의하여 $800^{\circ}C$에서 하소하여 분말을 합성하였을 때, Fe의 함량에 상관없이 모두 페롭스카이트 단일상을 얻을 수 있었다. 합성분말의 열적 안정성을 측정하였는데, Fe의 함량이 적을수록 열적 안정성이 열악하여 x=0.0인 시료는 $1300^{\circ}C$에서 분해되었다 그러나 Fe이 치환된 재료의 경우에는 $1400^{\circ}C$까지 분해현상은 없었으나 $1300^{\circ}C$ 근처에서 용응되는 현상이 관찰되어 양극층의 접착온도를 $1300^{\circ}C$ 이하로 설정해야 함을 알았다. $Gd_{0.8}Ca_{0.2}Co_{1-x}Fe_xO_3,\;(x=0.0\~0.5)$로 반쪽전지를 제작하여 $800^{\circ}C$ 공기중에서 전지를 가동하며 양극의 산소환원 반응에 대한 활성을 조사한 결과 조성에 상관없이 $La_{0.9}Sr_{0.1}MnO_3$보다 우수한 활성을 가졌고, $x=0.0\~0.5$인 전극중에서는 x=0.2일 때 가장 좋은 양극특성을 보였다. 이와 같이 x=0.2인 경우에 가장 우수한 활성을 갖는 이유를, Fe의 함량이 많은 경우는 열적 안정성이 우수하나산소환원 반응에 대한 활성은 감소하므로 x=0.2에서 열적 안정성과 활성 사이에 최적의 trade-off가 나타남으로 설명하였다. x=0.2인 시료의 전기 전도도를 직류 4단자법에 의하여 측정하였을 때 $800^{\circ}C$에서 51 S/cm의 값을 나타내었고, 교류 2단자법으로 측정한 이온 전도도는$800^{\circ}C$에서 $6.0\times10^{-4}S/cm$의 값을 나타내었다. 즉 이 물질은 혼합 전도체로서 전극의 전 표면이 반응의 활성점으로 작용할 가능성이 있고, 이로부터 이들이 $La_{0.9}Sr_{0.1}MnO_3$보다 우수한 양극활성을 갖는 이유를 설명할 수 있었다.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• 한국지리정보학회지
• /
• 제19권2호
• /
• pp.47-62
• /
• 2016

본 연구는 한반도 해역 해양지질 및 지구물리 자료의 통합 DB시스템을 2009년부터 2013년까지 구축하였으며, 현재까지 시스템 운영 및 정보업데이트를 수행하고 있다. 해양수산부 연구사업에서 생산한 해저퇴적물의 입도분석자료, 층별 단면도, X-ray 영상, 중금속 분석자료, 유기탄소 분석자료와 함께 지구물리탐사 결과인 천부탄성파, 심부탄성파, 자력, 중력 자료를 수집하였다. 더불어, 국내 국 공립기관이 보유하고 있는 기존 자료와 미국, 일본의 한반도 해역 자료도 추가로 수집하였다. 자료포맷은 텍스트 파일, 엑셀 파일, PDF 파일, 이미지 파일, SEG-Y 이진파일 등으로 다양하였으며, 원본자료는 Archive DB에 원형 그대로 저장하여 향후의 재가공과 재분석에 대비하였다. 또한, 수집 자료의 비교분석을 목적으로 GIS 기반 데이터베이스와 검색시스템도 개발하였다. 모든 자료를 ArcGIS 툴을 이용하여 shape 파일로 변환하였으며, 오라클과 ArcGIS를 이용하여 GIS DB를 구축하였다. 클라이언트/서버 방식의 GIS 어플리케이션 개발을 통해 자료검색과 과학 자료 표출기능을 구현하였으며, 가시화를 위해 ChartFX 프로그램과 새로 개발한 전용 프로그램을 이용하였다.