• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.33-40
• /
• 1980

The author observed the eruption pattern of the mandibular premolars. For this study the author took 406 cases of oblique cephalographs of 6 to 12 year old children. The measurement were with regard to the vertical and horizontal dimensional changes and tooth axis changes to the occlusal plane. The following results were obtained. 1. At stage V the tooth axis of 1st premolar inclined mesially to the occlusal plane, as the tooth erupt toward vertically the angulation changed that at stage X the tooth axis almost right angle to the occlusal plane. 2. The distance from the root apex of premolars to the lower border of mandible were slightly increased to the stage VII, while after stage VII rapid increasing appeared. At stage X the distance of 1st premolar was more longer than 2nd premolar. 3. The distance from the mesial surface of 1st molar to the mesial surface of premolars were decreased slightly to the stage VII, but this distances were decreased rapidly after stage VII. 4. The distance between distal surface of 1st premolar and mesial surface of 2nd premolar was almost constant before stage VIII, at stage IX this distance was little presented because the premolars were contacted.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.83-90
• /
• 2004

In this paper, we proposed a new instruction set(X32Y ISA) with 3 different types of instruction mode. The proposed instruction set organizes 32-bit, 24-bit, 16-bit instruction in order to solves a problem of memory size limitation in an embedded microprocessor. We designed a 32-bit 5 stage pipeline RISC microprocessor based on the X32V ISA. To verify the proposed the X32V ISA and a microprocessor, we estimated a program code size of multimedia application programs using a X32V simulator. In result, we verified that the Light mode and the Ultra Light mode obtains 8%, 27% reduction of a program code size through comparison with the Default mode. The proposed microprocessor was verified all X32V instructions execution at Xilinx FPGA with 33MHz operating frequency,

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.96-103
• /
• 2006

To establish of standard technique of nano-length measurement in 2D plane, new AFM system has been designed. In the long range (about several tens of ${\mu}m$), measurement uncertainty is dominantly affected by the Abbe error of XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motion. In this paper, an AFM system with minimum offset of XY sensing is designed. And XY scanning stage is designed to minimize rotation angle because Abbe errors occur through the multiply of offset and rotation angle. To minimize the rotation angle optimal design has performed by maximizing the stiffness ratio of motion direction to the parasitic motion direction of each stage. This paper describes the design scheme of full AFM system, especially about XY stage. Full range of fabricated XY scanner is $100{\mu}m\times100{\mu}m$. And tilting, pitch and yaw motion are measured by autocollimator to evaluate the performance of XY stage. As a result, XY scanner can have good performance. Using this AFM system, 3um pitch specimen was measured. The uncertainty of total system has been evaluated. X and Y direction performance is different. X-direction measuring performance is better. So to evaluate only ID pitch length, X-direction scanning is preferable. Its expanded uncertainty(k=2) is $\sqrt{(3.96)^2+(4.10\times10^{-5}{\times}p)^2}$ measured length in nm.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.4
• /
• pp.381-387
• /
• 1999

Purpose: The International Labor Organization (ILO) has established an international standard for chest X-ray diagnosis of pneumoconiosis since 1980. However, there is a need for improved diagnosis and staging in occupational disease. We evaluated Ga-67 citrate scintigraphy quantitatively and correlated the scintigraphic findings with pulmonary function tests and chest X-ray results. Materials and Methods: Twenty-five patients underwent whole body scintigraphy with additional chest and abdomen images 48 hrs after intravenous injection of 185 MBq of Ga-67 citrate. Ten normal controls were also studied. Regions of interest (ROI) were drawn on the posterior image to measure counts from the liver and lungs (Lung/Liver Ratio). Results: L/L ratio according to the stages of chest X-ray classification were as follows; stage 0 (normal, n=10): $0.3948{\pm}0.0692$, stage 1 (n=10): $0.5763{\pm}0.1537$, stage 2 (n=11), $0.6849{\pm}0.1459$, stage 3 (n=4) $0.9913{\pm}0.0712$. There was a significant correlation between the scintigraphic L/L ratio and the X-ray stage (r=0.618, p<0.05). However, no significant correlation between L/L ratio and pulmonary function tests were observed (p>0.05). Conclusion: Quantitative Ga-67 scintigraphy can be a useful method for staging of silicosis. However, it is not a method to assess pulmonary functional impairment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.88-95
• /
• 2011

In this study, Image Processing Algorithms which can make intervertebral disk images distinct and be easy to apply when measuring X-ray image of spine by using Cobb's angle and can measure the stage of scoliosis pertaining to X-ray image including the whole length of spine by converting to just one spinal functional graph without appling Cobb's angle in every disk are proposed. In addition, The calculated average value of L per $1^{\circ}$ Cobb's angle as to X-ray image of spine results in 0.568 which can be a standard for detecting the stage of scoliosis.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.315-320
• /
• 1994

Li-GICs as a high performance energy storager were synthesized as a function of the Li content by the admixture and add-pressure method. The characteristics of these prepared compounds have been determined from the studies by X-ray diffraction, UV-VIS spectrometry and CHN analysis. It follows from the results of X-ray diffraction that the lower-stage intercalation compounds are formed as the Li contents increase, however the mixed stages in these compounds are also observed. In the case of the $Li_{40wt%}$, the compound with the structure of stage 1 has been predominently, but the structure of only stage 1 is not obtained. The $d_{001}$ value of stage 1 was determined to be ca. $3.70{\AA}$. An analysis of spectrometric data shows that each of the compounds gives distingushible energy state spectra. It is seen from the spectra that the positions of $R_{min}$ values, with increase in the Li contents, are shifted in the region of higher energy state. Such a result can be attributed to the formation of stable stages. The results of CHN analysis allow us to find the mixing state related to chemical compositions of the intercalated compounds and the superiority to admixture and add-pressure method. From the results determined, it reveals that $Li_{10wt%}$-GIC and $Li_{20wt%}$-GIC can be utilized for an anode of rechargable battery.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1999

This paper considers the problem of determining the optimum target values of the quality characteristic of interest Y and the screening limits of a surrogate variable X which is correlated with Y under two-stage screening procedure. In the two-stage screening procedure, X is measured first to decide whether an item should be accepted, rejected or additional observations should be taken. If it is difficult to decide on the result of measured value of X, Y is then observed to classify the undecided items. Assuming that Y and X are jointly normally distributed, a model is constructed which involves selling and reduced prices, production, inspection, and penalty costs. Methods of finding the optimum process mean and the screening limits are presented. A numerical example and analysis of the results are also presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.31-41
• /
• 1986

Knowledge of the degree of yield reduction due to water stress at different crop growth stages in rice production is important for rational scheduling of irrigation during periods of insufficient water supply. Previous studies to determine the degree of yield reduction duo to water stress suffered from interruptions by rain during experiment. Also the findings did rot relate the degree of water stress to the soil water potential and water deficit status of rice plants. In this study, two years experiments were conducted using the high yielding rice varieties, an Indica x Japonica (Nampoong) and a Japonica variety(Choochung). These were grown in 1/200$^{\circ}$ plastic pots placed under a rainfall autosensing, sliding clear plastic roof facility to control rainfall interruptions. The results obtained were as follows. 1.The two varieties differed in the growth stage most sensitive to water stress as well as the degree of yield reductions. When rice plants were stressed to the leaf rolling score 4 and soil water potential of about - 20 bar at major crop growth stages which included heading, booting, non-effective tillering, panicle initiation and early tillering stages, the yield reductions in the Indica x Japonica variety were 58%, 34%, 27%, 22%, and 21%, respectively, whereas in the Japonica vairety they were 23%, 36%, 1%, 13% and 22%, respectively. This result show that the recommended drainage during non-effective tillering is valid only for the Japonica variety. Sufficient irrigation at booting, heading and early tillering stages are necessary for both varieties. 2.The two varieties showed visible wilting symptoms when the soil water potential dropped to about - 3.0 bar. The Japonica variety showed more leaf rolling than the Indica X Japonica. However, it had a higher retention of leaf water content and greater stomatal diffusive resistance. When the soil water potential dropped, the Japonica variety showed leaf rolling score (LRS) 1 at 0 soil-5. 0 bar and LRS 2 at 0 soil -6.0 bar while the Indica X Japonica showed LRS 1 at 0 soil - 5.5 bar and LRS 2at 0 Soil - 9.0 bar. The stomatal diffusive resistance was maximum at the second top leaf blade in both varieties at intermediate water stress of 0 soil - 4.5 bar. 3.The number of days that was required for the soil water potential to drop to-3. 0 bar and to - 20.0 bar after drainage of irrigation water from the 20cm deep silty clay loam soil in the pots were 6 and 13 days, respectively for booting stage, and 7 and 11 days, respectively for heading stage, 9 and 12 days, respectively for panicle initiation stage, and 12 and 19 days, respectively for early tillering stage. 4.Water stress during the early tillering stage recorded the longest delay in beading time, the largest reduction in panicle numbers and a substantial yield decrease of 20%. This calls for better water management to ensure the availability of water at this stage, particularly during drought periods. In addition, a reexamination of the conventional inter-drainage practice during the non-effective tillering stage is necessary for the high yielding Indica X Japonica varieties.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.131-138
• /
• 1995

We have discussed on the structural transition and its effect on the electrical property of Li-GFDICs and Li-PCDICs occuring during the deintercalation process of Li-Graphite Fiber Intercalation Compounds(Li-GFICs) and Li-Petroleum Cokes Intercalation Compounds(Li-PCDICs) synthesized under pressure and temperature by spontaneous oxidation by air circulation. The analytical results were obtained by X-ray diffraction and electrical specific resistivity measurements. According to X-ray analysis, we have found that the major stage of Li-GFICs was stage 2 and those of Li-PCICs were stage 1 and stage 2, respectively. And from this results of the deintercalation process, we have found that the deintercalation process did not occur any more after 5th week of Li-GFDICs and after 3rd week of Li-PCDICs. According to the results of the electrical specific resistivity measurements, Li-GFDICs showed little variation to 3rd week and rising in the steady curve after 4th week, while Li-PCDICs showed a rising in the steady curve to 3rd week and a declining curve after 3rd week. Therefore from these results, we can consider that graphite fiber and petroleum cokes as a substrate can be also used as an anode material of battery because they have good intercalation-deintercalation reactivity with lithium.

• Korean journal of applied entomology
• /
• v.53 no.2
• /
• pp.93-96
• /
• 2014

This study was conducted to determine the economic injury levels and control thresholds for the striped cabbage flea beetle, Phyllotreta striolata (Coleoptera: Chrysomelidae), on Chinese cabbage at two different planting times. The number of inoculated adults per 10 cabbages was 0, 2, 4, 8, and 16 at the early developmental stage of the cabbage5 days after planting) and 0, 10, 20, 30, and 40 at the middle developmental stage (30 days after planting). Damages to the leaves at the first inoculation were 2.5-21.1% and at the second inoculation were 1.8-26.3% after harvesting. The linear relationships between population density and yield reduction were as follows: Y = 1.3475X + 2.135 ($R^2$ = 0.8699) at the early developmental stage and Y = 0.703X - 1.78 ($R^2$ = 0.966) at the middle developmental stage. On the basis of these results, the economic injury levels caused 5% loss of yield; there were 2.1 adults per 10 Chinese cabbage at the early developmental stage and 9.6 adults per 10 Chinese cabbage at the middle developmental stage.