• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.107-109
• /
• 1998

The $SnO_2$, Sn-doped $In_2O+3\; and \;Ce-doped\; TiO_2$ films have been prepared by RF sputtering method, and their opto-electrochemical properties were investigated in view of the applicability as counter electrodes in the electrochromic window system. These oxide films could reversibly intercalate $Li^+$ ions owing to the nanocrystalline texture, but remained colorless and transparent. The high transmittance of the lithiated films could be attributed to the prevalence of the $Sn^{4+}/Sn^{2+}\; and\; Ce^{4+}/Ce^{3+}$ redox couples having 5s and 6s character conduction bands, respectively. For the Ce-doped $TiO_2$ film, $(TiO_2)_{1-x}(CeO_2)_x$, an optimized electrochemical reversibility was found in the film with the composition of x = 0.1.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.459-467
• /
• 1999

With fully harnessing the functions provided by Windows NT, we suggest the generating method of RPL profile and the RPL protocol for remote booting on DL-NCS(Network Computing System for Diskless client PCs). This system can offer clients, without having hard disk, boot remotely Window 9x stored in server's hard disk and can share peripheral devices and application programs in the server side. For booting Window 9x from DL-NCS, twenty-five clients' PCs were set for simultaneous on and finally the PCs were booted in similar time interval compared to that from a desktop PC having local disk. This system was also experimented to the application programs. And this system can yield excellent networking environments. In sum, with using this DL-NCS, we can reduce the installing costs of peripheral device, recycle the lower grade PCs such as 486SX/DX, and save the budgets for software purchase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.226-232
• /
• 2023

As a potential alternative to flash memory, HfO₂/Al₂O₃ stacks appear to be a viable option as charge capture layers in charge trapping memories. The paper undertakes a review of HfO₂/Al₂O₃ stacks as charge trapping layers, with a focus on comparing the number, thickness, and post-deposition heat treatment and γ-ray and white x-ray treatment of such stacks. Compared to a single HfO₂ layer, the memory window of the 5-layered stack increased by 152.4% after O₂ annealing at ±12 V. The memory window enlarged with the increase in number of layers in the stack and the increase in the Al/Hf content in the stack. Furthermore, our comparison of the treatment of HfO₂/Al₂O₃ stacks with varying annealing temperatures revealed that an increased annealing temperature resulted in a wider storage window. The samples treated with O₂ and subjected to various γ radiation intensities displayed superior resistance. and the memory window increased to 12.6 V at ±16 V for 100 kGy radiation intensity compared to the untreated samples. It has also been established that increasing doses of white x-rays induced a greater number of deep defects. The optimization of stacking layers along with post-deposition treatment condition can play significant role in extending the memory window.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1073-1076
• /
• 1998

This paper describes implementation of a highlevel graphic design entry tool operating on X Window system The proposed design entry tool includes visual schematic entry, hierarchical modeling ability and VHDL source code generation. Experimental results show the efficiency of the proposed design system

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.7-14
• /
• 1994

This paper describes the development of the interactive hullform transformation program. This program has many hull transformation functions such as main particular transformation, deadrise generation, section characteristic transformation, local transformation and CB, LCB variation, etc. MBASTRANS adopted the GUI(Graphical User Interface) using the OSF/Motif based on the X-Window system and used X-PLOT and GLBAX which are 2 and 3 dimensional graphic libraries, respectively. The interface module cans generate the information of the hullform for the SIKOB package and the hydrodynamic analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.365-374
• /
• 1998

Control Chart is a powerful tool to detect that process is in control or out of control. CIM can have real effect when CIM involve automated quality control. A neural network approach is used for unnatural pattern detecting of control chart. The previous moving window method uses all unnatural pattern that is detected as moving time window. Therefore, It trains a large number of unnatural pattern and takes training time long. In this paper, the proposed method tests a small number of training unnatural pattern which modifies test data without repeating time. We shows that the proposed method has differences In training time and identification rate on the previous moving windows method. As results, we reduced training time and obtain the same identification rate.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.308-319
• /
• 1994

We can launch satellites only at a certain time which satisfies special conditions, since the current techniques cannot overcome these constraints. Launch window constraints are the eclipse duration, solar aspect angle, attitude control, launch site and the launch vehicle constraints, etc. In this paper, launch window is calculated that satisfies all these constraints. In calculating launch window, the basic concepts are relative locations of the sun-satellite-earth system and relative velocities of these, and these requires geometric consideration for each satellite. Launch window calculation was applied to Kitsat 2(low earth orbit) and Koreasat(geostationary orbit). The result is shown in the form of a graph that has dates on the X-axis and the corresponding times of the given day on the Y-axis.

• Annual Conference on Human and Language Technology
• /
• 1989.10a
• /
• pp.183-190
• /
• 1989

본 논문에서는 한글 X 윈도우 시스템의 개발 과정을 소개하고 이용 바탕으로 한 GUI의 한글화 방안을 제시한다. X 윈도우 시스템은 이식성이 높고 다양한 사용자 접속을 제공한다. 특히 소스가 거의 공개되어 있어 UNIX 워크스테이션의 표준 윈도우 시스템으로서의 위치를 굳혀가고 있다. 한글 X는 여기에 한글의 입출력 기능을 추가한 것이다. 현재 UNIX 와 X 윈도우를 기반으로 한 그래픽 사용자 접속 (GUI)을 표준화하려는 움직임이 세계적으로 높아가고 있다. OSF와 UI의 두 단체에서 각각 Motif와 OpenLook을 표준 GUI로 내놓고 있는데 이 두 GUI는 모두 나름대로의 지지 기반을 가지고 사용될 것으로 보인다. 때문에 한글 GUI의 개발은 시급하고 중요한 문제라고 할 수 있다. 한글 X의 개발은 X 윈도우 환경에서 한글을 사용할 수 있게 되었다는 것뿐만 아니라 GUI 한글화의 기반을 마련했다는 점에서 그 의의를 갖는다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.690-693
• /
• 2003

Soft x-ray microscopy provides a unique set of capabilities in-between those of visible light and electron microscopy. It has long been recognized that nature provides a 'water window' spectral region between the K shell x-ray absorption edges of carbon (~290eV) and oxygen (~540eV), where organic materials show strong absorption and phase contrast, while water is relatively non-absorbing. This enables imaging of hydrated biological specimens that are several microns thick with high intrinsic contrast using x-rays with a wavelength of 2.3~4.4nm. Soft X-ray microscopy is therefore well suited to the study of specimens like single biological cells. The most direct advantage of X-ray microscope is their high spatial resolution when compared with visible light microscopes, combined with an ability to image hydrated specimens that are several microns with a minimum of preparation. Our study describes the conceptual design of soft x-ray microscope system based on a laser-based source for biomedical application with high resolution ($\leq$50nm) and short exposure time ($\leq$30sec).