• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.931-937
• /
• 2004

본 논문은 주파수 선택적 레일레이 페이딩(Frequency selective Rayleigh fading) 환경 하에서 수신 신호들 간에 상관이 존재할 때, OFDM(Othogonal Frequency Division Multiplexing) 다중 안테나 시스템의 채널 용량을 연구하였다. 송, 수신안테나를 각각 두 개 사용하였을 때, 채널 용량을 상관 계수의 함수로 closed-form 형태로 유도하였고, 각 안테나 당 평균수신 신호 전력이 동일할 때와 동일하지 않을 때 채널 용량에 미치는 영향을 분석하였다. 분석 결과 수신 신호의 상관 계수가 증가할수록 채널 용량이 감소하였고, 수신 신호 상관 계수가 약 0.7보다 클 때 채널 용량은 급격히 감소하였다. 그리고 각 안테나 당 평균 수신 신호 전력이 동일할 때 채널 용량은 최대가 됨을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.183-191
• /
• 2023

This study was conducted experimentally to investigate the surface temperature of the heat sink, the air temperature in the flow channel and the sample temperature by changing the channel number of channel type heat sink and the air flow rate when heating and cooling the bio sample. The target temperature of the sample was 15℃ or less as the minimum value and 82℃ or more as the maximum value. In this study, the channel number of the heat sink(N = 1, 2, 4, 5, 10) and the air flow rate(Q=25, 42, 54m³/min) were varied. The bio sample was replaced with water, and the volume of water is 4mL. The size of the heat sink is 80x73x150mm and the material is aluminum. When cooling the sample, the surface temperature, the air temperature and the sample temperature were highly dependent on the number of channels and the flow rate. However, when the sample is heated, the surface temperature, air temperature and sample temperature do not depend on the number of channels and the flow rate. It was found that the conditions for satisfying the minimum temperature of 15℃ or less when cooling the sample were the number of channels N≥5 and the flow rate Q≥42m³/min. When heating the sample, the conditions to satisfy the maximum temperature of 82℃ or more are the number of channels N≤5 and the air flow rate Q≤42m³/min.

• 한국비블리아학회지
• /
• 제5권1호
• /
• pp.85-105
• /
• 1981

Information is an essential factor leading the rapid progress which is one of the distinguished characteristics in modem society. As more information is required and as more is supplied by individuals, governmental units, businesses, and educational institutions, the greater will be the requirement for efficient methods of communication. One possibility for improving the information dissemination process is to use computers. The capabilities of such machine are beginning to be used in the process of Information storage, retrieval and dissemination. An important problems, that must be carefully examined is whether one technique for information retrieval is better for worse than another. This paper examines problem of how to evaluate an information retrieval system. One specific approach is a cost accounting model for use in studying how to minimize the cost of operating a mechanized retrieval system. Through the use of cost analysis, the model provides a method for comparative evaluation between systems. The general cost accounting model of the literature retrieval system being designed by this study are given below. 1. The total cost accounting model of the literature retrieval system. The total cost of the literature retrieval system = (the cost per unit of user time X the amount of user time) + ( the cost per unit of system time X the amount of system time) 2. System cost accounting model system cost = (the pre-search system cost per unit of time X time) + (the search system cost per unit of time X time) + (the post search system cost per unit of time X time) 1) Pre-search system cost per unit of time = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 2) Search system cost per unit of time = comparison cost + document representation cost. 3) Post-search system cost per unit of time. = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 3. User cost accounting model Total user cost = [pre-search user cost per unit of time X (time + additional time) ] + [search user cost per unit of time X (time + additional time) ] + [post-search user cost per unit of time X (time + additional time) ].

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권7호
• /
• pp.2131-2153
• /
• 2022

To achieve accurate detection of tuberculosis (TB) areas in chest radiographs, we design a chest X-ray TB area detection algorithm. The algorithm consists of two stages: the chest X-ray TB classification network (CXTCNet) and the chest X-ray TB area detection network (CXTDNet). CXTCNet is used to judge the presence or absence of TB areas in chest X-ray images, thereby excluding the influence of other lung diseases on the detection of TB areas. It can reduce false positives in the detection network and improve the accuracy of detection results. In CXTCNet, we propose a channel attention mechanism (CAM) module and combine it with DenseNet. This module enables the network to learn more spatial and channel features information about chest X-ray images, thereby improving network performance. CXTDNet is a design based on a sparse object detection algorithm (Sparse R-CNN). A group of fixed learnable proposal boxes and learnable proposal features are using for classification and location. The predictions of the algorithm are output directly without non-maximal suppression post-processing. Furthermore, we use CLAHE to reduce image noise and improve image quality for data preprocessing. Experiments on dataset TBX11K show that the accuracy of the proposed CXTCNet is up to 99.10%, which is better than most current TB classification algorithms. Finally, our proposed chest X-ray TB detection algorithm could achieve AP of 45.35% and AP50 of 74.20%. We also establish a chest X-ray TB dataset with 304 sheets. And experiments on this dataset showed that the accuracy of the diagnosis was comparable to that of radiologists. We hope that our proposed algorithm and established dataset will advance the field of TB detection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2839-2842
• /
• 2003

The paper is proposed for control signals to operate X-ray detector signal acquisition system There are control signals and synchronized signals for data acquisition system. X-ray detector signal acquisition system is divided into pre-treatment part which is to amplify acquired dual 16 channel analog input, converter pan which is to multiplex, and convert data and transmit part that combine transferred data output and address in order. It also describes detailed control signals.

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.1-6
• /
• 2007

본 논문에서 기존에 사용하고 있는 metamorphic high electron transistor (MHEMT)의 채널에 InP를 추가하여 제작 하였다. InP는 In0.53Ga0.47As와 비교하여 낮은 충돌 이온화 계수를 가지고 있다. 그런 특성을 MHEMT의 문제점 중의 하나인 낮은 항복전압의 개선에 이용하였다. 우리는 기존의 MHEMT와 InP 합성 채널 MHEMT의 항복 특성과 주파수 특성을 비교 하였다. 본 논문에서 InP 합성 채널 MHEMT의 on-state와 off-state 항복전압이 각각 2.4와 5.7 V가 측정 되었고 또한 cut-off 주파수와 maximum oscillation 주파수는 각각 160 GHz와 230 GHz가 측정 되었다. 위의 결과는 InP 합성 채널 MHEMT가 밀리미터파 대역의 전력용 소자에 이용되는데 큰 장점을 갖는 소자임을 알 수 있다.

• 한국산림과학회지
• /
• 제84권3호
• /
• pp.369-376
• /
• 1995

흑백 항공사진을 이용하여 산지급류하천(山地急流河川)의 하상변동(河床變動)을 파악한 결과, 다음과 같은 면에서 항공사진이 유효정보로 사용될 수 있다. 1. 항공사진 및 현지조사에 의한 하도폭(河道幅) 측정값의 직선회귀식은 Y=1.0+0.94X($r^2=0.98$)로, 두 인자간의 높은 상관관계가 확인되어 항공사진이 하도폭 해석에 유효하게 사용될 수 있다. 2. 항공사진 판독에 의해 하도내의 하상퇴적지(河床堆積地)와 유로(流路)의 평면적(平面的) 구분(區分)이 가능하였으며, 또한 하상퇴적지(河床堆積地)의 평면적(平面的) 분포(分布) 상황(狀況)과 유로(流路)의 규모(規模) 및 형성과정(形成過程)을 추정 할 수 있다. 3. 촬영시기가 상이한 항공사진을 판독하므로서 각 시기별 유로특성(流路特性)을 파악할 수 있었으며, 또한 이를 비교, 분석하므로서 하상변동(河床變動)에 강하게 영향하는 유로변동(流路變動) 과정(過程)을 추정할 수 있다. 4. 항공사진상의 하도폭(河道幅) 측정(測定), 하상(河床)의 평면형태(平面形狀) 해석(解析) 및 유로변동(流路變動) 파악(把握) 등에 의해 하상미지형도(河床微地形圖)를 작성할 수 있으며, 이를 기초로 하상퇴적지(河床堆積地)의 평면적(平面的) 해석(解析)이 가능하다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권9호
• /
• pp.623-627
• /
• 1999

We report a new in-situ fluorine passivation method without in implantation by employing excimer laser annealing of $SiO_{x}F_{y}$/a-Si structure and its effects on p-channel poly-Si TFTs. The proposed method doesn't require any additional annealing step and is a low temperature process because fluorine passivation is simultaneous with excimer-laser-induced crystallization. A in-situ fluorine passivation by the proposed method was verified form XPS analysis and conductivity measurement. From experimental results, it has been shown that the proposed method is effective to improve the electrical characteristics, specially field-effect mobility, and the electrical stability of p-channel poly-Si TFTs. The improvement id due to fluorine passivation, which reduces the trap state density and forms the strong Si-F bonds in poly-Si channel and $SiO_2/poly-Si$ interface. From these results, the high performance poly-Si TFTs canbe obtained by employing the excimer-laser-induced fluorine passivation method.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1351-1354
• /
• 2004

기존의 CDMA 1x EV-DO 시스템에서 비실시간 서비스는 Propotional Fairness 알고리즘을 사용해 셀내의 모든 유저에게 fairness를 제공했지만, throughput이 낮았다. 그래서, 이 논문에서는 이를 개선한 cell의 downlink에서 비실시간 서비스를 스케줄링시 fairness를 제공하면서, throughput을 향상시킬 수 있는 방안을 제안하고 구현하였다.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.445-452
• /
• 1987

In this paper, a model for characteristics in the AlxGa1-xAs layer of MODFET's is presented. The characteristics of conduction band in the AlxGa1-xAs layer is analyzed with the Fermi-Dirac statistics. And using the conduction band energy which is calculated with the numerical calculation method (false-Positon method), the variations of the electric-field distribution, the ionized donor concentration, and the two-dimensional electron gas density with gate voltage are calculated, respectively. The channel formation process for the parasitic MESFET operation in the MOD structure is also analyzed, and the characteristics in the AlxGa1-xAs layer is analytically modeled. The throretical results describe well the general characteristics in the MOD structure.