• Journal of Astronomy and Space Sciences
• /
• v.39 no.4
• /
• pp.159-167
• /
• 2022

Because of the small number of spacecraft available in the Earth's magnetosphere at any given time, it is not possible to obtain direct measurements of the fundamental quantities, such as the magnetic field and plasma density, with a spatial coverage necessary for studying, global magnetospheric phenomena. In such cases, empirical as well as physics-based models are proven to be extremely valuable. This requires not only having high fidelity and high accuracy models, but also knowing the weakness and strength of such models. In this study, we assess the accuracy of the widely used Tsyganenko magnetic field models, T96, T01, and T04, by comparing the calculated magnetic field with the ones measured in-situ by the GOES satellites during geomagnetically disturbed times. We first set the baseline accuracy of the models from a data-model comparison during the intervals of geomagnetically quiet times. During quiet times, we find that all three models exhibit a systematic error of about 10% in the magnetic field magnitude, while the error in the field vector direction is on average less than 1%. We then assess the model accuracy by a data-model comparison during twelve geomagnetic storm events. We find that the errors in both the magnitude and the direction are well maintained at the quiet-time level throughout the storm phase, except during the main phase of the storms in which the largest error can reach 15% on average, and exceed well over 70% in the worst case. Interestingly, the largest error occurs not at the Dst minimum but 2-3 hours before the minimum. Finally, the T96 model has consistently underperformed compared to the other models, likely due to the lack of computation for the effects of ring current. However, the T96 and T01 models are accurate enough for most of the time except for highly disturbed periods.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.2
• /
• pp.49-61
• /
• 2009

Finite Field multiplication operation is one of the most important operations in the finite field arithmetic. Recently, Fan and Dai introduced a Shifted Polynomial Basis(SPB) and construct a non-pipeline bit-parallel multiplier for $F_{2^n}$. In this paper, we propose a new bit-parallel shifted polynomial basis type I and type II multipliers for $F_{2^n}$ defined by an irreducible trinomial $x^{n}+x^{k}+1$. The proposed type I multiplier has more efficient the space and time complexity than the previous ones. And, proposed type II multiplier have a smaller space complexity than all previously SPB multiplier(include our type I multiplier). However, the time complexity of proposed type II is increased by 1 XOR time-delay in the worst case.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.5 no.1
• /
• pp.17-24
• /
• 1995

In spite of the good security of the cryptosystem on an elliptic curve defined over finite field, the cryptosystem on an elliptic curve is slower than that on a finite field. To be practical, we need a better method to improve a speed of the cryptosystem on an elliptic curve defined over a finite field. In 1991, Koblitz suggested to use an anomalous curve over $F_2$, which is an elliptic curve with Frobenious map whose trace is 1, and reduced a speed of computation of mP. In this paper, we consider an elliptic curve defined over $F_4$ with Frobenious map whose trace is 3 and suggest an efficient algorithm to compute mP. On the proposed elliptic curve, we can compute multiples mP with ${\frac{3}{2}}log_2m$+1 addition in worst case.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.25-31
• /
• 2020

Boiling Liquid Expanding Vapor Explosion(BLEVE) can cause not only economic damage to the plant but also serious casualties. LPG accidents account for 89.6 percent of all accidents caused by gas leaks in Korea over the past nine years, while casualties from accidents also account for 73 percent of all accidents, according to statistics from the Korea Gas Safety Corporation. In addition, a potential explosion and a fire accident from one LPG storage tank may affect the nearby storage tanks, causing secondary and tertiary damage (domino effect). The safety distance standards for LPG used by LPG workplaces, charging stations, and homes in Korea have become stricter following the explosion of LPG charging stations in Bucheon. The safety distance regulation is divided into regulations based on the distance damage and the risk including frequency. This study suggests two approaches to optimizing the safety distance based on the just consequence and risk including frequencies. Using the Phast 7.2 Risk Assessment software by DNV GL, the explosion overpressure and heat radiation were derived according to the distance caused by BLEVE in the worst-case scenario, and accident and damage probability were derived by considering the probit function and domino effect. In addition, the safety distance between LPG tanks or LPG charging stations was derived to minimize damage effects by utilizing these measures.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1551-1565
• /
• 2020

On April 4, 2019, a forest fire started in Goseong County and lasted for three days, burning the neighboring areas of Sokcho. The strong winds moved the blaze from one region to another region and declared the worst wildfire in South Korea in years. More than 1,880 facilities, including 400 homes, were burnt down. The fire burned a total area of 529 hectares (1,307 acres), which involved 13,000 rescuers and 16,500 military troops to control the fire occurrence. Thousands of people were evacuated, and two people are dead. This study generated post-wildfire maps to provide necessary data for evacuation and mitigation planning to respond to this destructive wildfire, also prevent further damage and restore the area affected by the wildfire. This study used KOMPSAT-3A and Sentinel-2 imagery to map the post-wildfire condition. The SVM showed higher accuracy (overall accuracy 95.29%) compared with ANN (overall accuracy of 94.61%) for the KOMPSAT-3A. Moreover, for Sentinel-2, the SVM attained a higher accuracy (overall accuracy of 91.52%) than the ANN algorithm (overall accuracy 90.11%). In total, four post-wildfire burned area maps were generated; these results can be used to assess the area affected by the Sokcho wildfire and wildfire mitigation planning in the future.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.71-79
• /
• 2021

In this study, a real-scale fuel-cell room of volume 1.36 m³ is constructed to confirm the explosion characteristics of hydrogen-air mixture gas in a hydrogen-powered house. A volume concentration of 40% is applied in the fuel-cell room as the worst-case scenario to examine the most severe accident possible, and two types of doors (made of plastic sheet and wood) are fabricated to observe their effects on the overpressure and impulse. The peak overpressure and impulse based on distance from the ignition source are experimentally observed and assessed. The maximum and minimum overpressures with a plastic-sheet door are about 20 and 6.7 kPa and those with a wooden door are about 46 and 13 kPa at distances of 1 and 5 m from the ignition source, respectively. The ranges of impulses for distances of 1-5 m from the ignition source are about 82-28 Pa·s with a plastic-sheet door and 101-28 Pa·s with a wooden door. The amount of damage to people, buildings, and property due to the peak overpressure and impulse is presented to determine the safe distance; accordingly, the safe distance to prevent harm to humans is about 5 m based on the 'injuries' class, but the structural damage was not serious.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.84-96
• /
• 2022

In the worst case, a temporary ignition source (also known as transient combustibles) between two electrical panels can damage both panels. Mitigation strategies for electrical panel fires were previously developed using fire modeling and risk analysis. However, since they do not comply with deterministic fire protection requirements, it is necessary to analyze the boundary values at which combustibles may damage targets depending on various factors. In the present study, a sensitivity analysis of input variables related to the damage threshold of two electrical panels was performed for dimensionless geometry using a Fire Dynamics Simulator (FDS). A new methodology using a damage evaluation map was developed to assess the damage of the electrical panel. The input variables were the distance between the electrical panels, the vertical height of the fuel, the size of the fire, the wind speed and the wind direction. The heat flux was determined to increase as the vertical distance between the fuel and the panel decreased, and the largest heat flux was predicted when the vertical separation distance divided by one half flame length was 0.3-0.5. As the distance between the panels increases, the heat flux decreases according to the power law, and damage can be avoided when the distance between the fuel and the panel is twice the length of the panel. When the wind direction is east and south, to avoid damage to the electrical panel the distance must be increased by 1.5 times compared to no wind. The present scale model can be applied to any configuration where combustibles are located between two electrical panels, and can provide useful guidance for the design of redundant electrical panels.

• SUVANNABHUMI
• /
• v.12 no.2
• /
• pp.53-80
• /
• 2020

Students of global development are often introduced to Southeast Asia by reading many of the influential authors whose ideas were derived from their experiences in the region. John Furnivall, Clifford Geertz, Benedict Anderson and James Scott have made Southeast Asia relevant to comprehending developments far beyond the region. It might even be added that others come to the region because it has also been the home to many key historical events and seminal social developments. However, when many of the best-known writings (and textbooks) of global history are examined, treatment of Southeast Asia is often scarce and in the worst cases non-existent. It is within this context that this paper will examine Southeast Asia's role in the interpretation of global history. The paper will consider the 'global history' as a historical production in order to depict the ways in which the construction of global narratives can be a reflection of the immediate needs of historians. Furthermore, the discussion will be historiographic, exhibiting the manner in which key global histories portrayed the significance of the region. Particular importance will be placed on the ways in which the region is used to present larger historical trajectories. Additionally, the paper will consider instances when Southeast Asia is either profoundly underrepresented in global narratives or misrepresented by global historians. Last, since the discussion will probe the nature of 'global history', it will also consider what the subject might look like from a Southeast Asian point of view. The paper will end by exploring the ways in which the region's history might be augmented to become visible to those who live outside or have little knowledge about it. Visual augmented reality offers great potential in many areas of education, training and heritage preservation. To draw upon augmented reality as a basic metaphor for enquiry (and methodology) means asking a different kind of question: how can a region be "augmented" to become (at least in this case) more prominent. That is, how can the region's nations, histories and cultures become augmented so that they can become the center of historical global narratives in their own right. Or, to put this in more familiar terms, how can the "autonomous voices" associated with the region make themselves heard?

• Journal of Creative Information Culture
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2020

In order to represent and process spatial data, hierarchical data structures such as a quadtree or a bintree are used. Various approaches for linearly representing the bintree have been proposed. S-Tree has the advantage of compressing the storage space by expressing binary region image data as a linear binary bit stream, but the higher the resolution of the image, the longer the length of the binary bit stream, the longer the storage space and the lower the search performance. In this paper, we construct a hierarchical structure of multiple separated bintrees with a full binary tree structure and express each bintree as two linear binary bit streams to reduce the range required for image search. It improves the overall search performance by performing a simple number conversion instead of searching directly the binary bit string path. Through the performance evaluation by the worst-case space-time complexity analysis, it was analyzed that the proposed method has better search performance and space efficiency than the previous one.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.801-807
• /
• 2008

This study attempts to evaluate and compare the land consumption efficiencies of various urban transport modes, utilizing the time-area method. With the careful considerations of travel conditions and modal characteristics, equations for the computation of time-area for various different modes are derived. With the appropriate assumed values of parameters, time-area consumptions per person per km for each mode both for peak and off-peak situations are computed and evaluated. The relationships between the time-area consumed and operating speed for each mode are graphically demonstrated and discussed. An example of the time-area consumed for a hypothetical commuter round-trip using various modes are also presented in order to clearly show the consumption of parking requirements by specific modes. It shows that regardless of facilities used, auto users are by far the worst in terms of area efficiency and that transit, especially rail rapid transit, is a superior mode. Pedestrian and bicycle, though consuming more than expected, also demonstrate the advantage in case of a short-distance trip in terms of area efficiency compared with the bus transit modes.