• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.20-36
• /
• 1993

Work-related low back pain is one of the major factors that cause the loss of working power especially in actively working age, therefore controlling the work-related low back pain is one of the major issues in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the efficient control program of the work-related low back pain. The subjects were male workers employed at the manufacturing industry in Pusan with longer than 6 months' working duration. The data was collected by self-reported questionnaire and interview from May 1 to October 31,1992. The contents of questionnaire were as follows:. the experience of low back pain within the recent one month, general characteristics(age, marital status, education level, religion, regular exercise), physical characteristics(height, weight), employment status(working duration, daily working hours, rest during work, satis(action fur the job), type of work and working environments(posture, forward bending, lifting and movement, satisfaction for table and chair). The result was analyzed for 608 entire respondents by case-control comparative method. The number of cases was 152 with a history of work-related low back pain, so the relative frequency of self-reported work-related low back pain was 25.0%, and the number of controls was 344 without any history of low back pain. As a result, two characteristics of the employment status(working duration, satisfaction fur the job) and all characteristics of type of work and working environments showed a statistical significance between the case and control groups(p<0.01). The Oddb ratios of these variables for Work-related low back pain were calculated. They were 7.88 for the satisfaction fur chair, 7.86 for lifting and movement,3.31 for satisfaction for table, and 2.22 fur bending forward(p<0.01). And for the multivariate logistic regression analysis confirmed that unsatisfaction for table was independent risk factor for Work-related low back pain. In summary, though this study was based upon the self-reported questionnaire and the subjective complaints, the satisfaction for chair, lifting and movement, satisfaction for table, and bending forward concerned with the type of work and working environments were considered as the main factors causing the work-related low back pain, and the work-related low back pain may be preventable by the ergonomic control of these factors.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.3
• /
• pp.694-704
• /
• 2024

This study selected domestic winter and summer sports instructors as the population and used convenience sampling among non-probability sampling methods to investigate the relationship between Work-Life Balance and turnover intention among seasonal sports instructors' job insecurity. A total of 200 questionnaires were distributed using . Of these, excluding 46 questionnaires that were judged to have been answered insincerely, a total of 154 questionnaires were used as a valid sample. Data processing methods included frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, simple regression analysis, and multiple regression analysis using the SPSS 27.0 program. The results of this study are as follows. First, as a result of analyzing the relationship between job insecurity and work-life balance, it was found that job insecurity did not affect work-leisure balance, but did affect work-family balance, work-growth balance, and an overall evaluation. Second, as a result of analyzing the relationship between job insecurity and turnover intention, it was found that job insecurity had an effect on turnover intention. Third, as a result of analyzing the relationship between work-life balance and turnover intention, it was found that only work-growth balance affected turnover intention.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.1
• /
• pp.81-102
• /
• 2013

The purpose of this study was to investigate the work-family reconciliation level of married women in double-income households. Specifically, the study aimed to test the positive spillover effects, asymmetry, and differential functions of work-family reconciliation. The study thus analyzed 1,114 married women in double-income households in the third-year data of the Korean Longitudinal Survey of Women and Families (KLoWF) done by Korean Women's Development Institute (KWDI), with the exception of those who were separated, divorced, or widowed from their husbands. The data were put to descriptive statistics, frequency analysis, and exploratory factor analysis using SPSS 20.0 for Windows. AMOS 20.0 was used to test the hypothesis on positive spillover effects, asymmetry, and differential functions. The analysis results confirm that work-family conflict, family-work conflict, work-family facilitation, and family-work facilitation are different concepts, thus supporting the hypothesis on positive spillover effects. Secondly, the negative effects of family on work were greater than those of work on family, whereas the positive effects of family on work were greater than those of work on family, which finding partially supported the hypothesis on asymmetry among the components of work-family reconciliation. Finally, the married women in double-income households with preschool children experienced more work-family conflict and family-work conflict than those with no preschool children, which result supported the hypothesis on differential functions between the two groups of women. The findings were combined to provide implications for the utilization of family resources, policies for work-family reconciliation, and plans for institutional supports to promote the work-family reconciliation of married women in double-income households.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.95-108
• /
• 1999

The purpose of this study is to find the diversification of the methodology of KM (knowledge management) Benchmarking which has been developed rapidly as a new managing paradigm all over the world for the 21th century. In particular, at the point of that it has been going to be inevitable for domestic companies to adopt and utilize a knowledge management system as the pending assignment for surviving in the 21th century, this study thus can enable them to support an adoption of KM and suggest directions for companies. Therefore, the successful cases of KM adoption all through the world have been analyzed by this study with the classifications of the industrial fields, work-flows from the view point of learning organizations and information technologies. As a result, the KM type bearing the specific of the respective industry has not been unrolled, and the common element in the analysis of work-flows has been found. Based on the result, it is desirable for the companies to adapt KM, extracting necessary work field for KM. Consequently speaking, they need to benchmark and adopt the KM methodology based on the extracted results.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.120-125
• /
• 2003

This research analyzes blasting accident cause that is happening construction and engineering works spot taking advantage of AHP (Analytic Hierarchy Process) techniques as metrical. Result that apply AHP with blasting accident that is happened the South Korea and Japan, appeared by thing which relative importance by human cause is highest. Specially, it is observance of safety rule that dominate the highest ratio among of human cause, and if observe a little, causes that prevention is possible are much. By result of this research, necessity of safety education is important first of all for prevention of blasting accident. Also, thorough safety control plan of during work and enough on-the-slut probe before work should be established. Because explosives uses gunpowder and explosive high energy, work by qualified person is essential. Ant it may become help to minimize dissipation of important life and property preventing beforehand explosion accident of gunpowder.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4349-4371
• /
• 2019

Moldable parallel tasks are widely used in different areas, such as weather forecast, biocomputing, mechanical calculation, and so on. Considering the deadline and the speedup, scheduling moldable parallel tasks becomes a difficulty. Past work majorly focuses on the LA (List Algorithms) or OMA (Optimizing the Middle Algorithms). Different from prior work, our work normalizes execution time and makes all tasks have the same scope in normalized execution time: [0,1], and then according to the normalized execution time, a method is used to search for the reference execution time without considering the deadline of tasks. According to the reference execution time, we get an initial scheduling result based on AFCFS (Adaptive First Comes First Served) policy. Finally, a heuristic approach is used to improve the performance of the initial scheduling result. We call our method HSRET (a Heuristic Scheduling method based on Reference Execution Time). Comparisons to other methods show that HSRET has good performance in AWT (Average Waiting Time), AET (Average Execution Time), and PUT (Percentages of Unfinished Tasks).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.36-49
• /
• 1998

The purpose of this study is to investigate the relationship between the work postures and upper extremity cumulative trauma disorders(CTDs) in female medical insurance bill reviewers(n=448). This study included diagnosis for CTDs, anthropometry and job analysis (workstations and posture). The characteristics of subject were 33.6 years of average age and 8.7 years of average work duration. The results were as fallows. Ergonomic conditions of workstation were unsuitable compared with anthropometry result. The height of work surface(79.5 cm) and chair(43.0 cm)were high. work space was small, and legs space under the table was limited. Work postures were awkward compared with recommended neutral postures. Neck flexion($21.0-36.0^{\circ}$), elbow elevation, shoulder abduction ($46.0-47.0^{\circ}$). wrist radial and ulnar deviation, forearm supination and pronation, and wrist repeated motion(12.7-21.5 freq./min) were analyzed as hazardous risk factors by job analysis. The prevalence of CTDs was 32.8 % by medical diagnosis. The prevalence rate of CTDs in hazardous work posture group was significantly greater than safe work posture group both neck-shoulder (relative prevalence = 5.2, p<0.001) and wrist-hand (relative prevalence = 2.5, p<0.05).

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.10 no.3
• /
• pp.354-360
• /
• 2003

Purpose: This study was done for the purpose of identifying the relationship between work stress and job satisfaction of nurses who were evaluating medical insurance. Method: The participants in the study were 154 nurses who were in charge of evaluating medical insurance in 32 hospitals in Korea. Data were collected for 1 month from April 20 to May 20, 2001. Result: The mean total work stress score was 93.79. In comparison with work stress scores according to the work stress factors, 'work overload'(2.95) had the highest work stress score. The mean total job satisfaction score was 69.56. The total work stress scores did not show significant differences for any of the variables. The total job satisfaction score showed significant differences for the variables of age (F=3.51, p=.01), position (F=3.16, p=.02) and reason for transfer from one department to another (F=3.40, p=.003). Conclusion: The total work stress score showed a inverse correlation(v=-.36, p=.001) with the total job satisfaction score.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.141-147
• /
• 2010

Risk level for each construction work can be very important factors to establish advanced preventionmeasures. But it is important how to produce it. There are three different methods to set it up for consturuction situation. They are as follows; 1) occurrence frequency = the number of accident workers of each work kind / yearly accident workers 2) occurrence frequency = the number of accident workers of each work kind / yearly workers 3) occurrence frequency = the number of accident workers of each work kind / the total workers All these three concepts(=averaged concept)are analyzed. Additionally frequency based on discrete curve, and severity based on continuous curve are also combined for producing risk level with more scientific approach. This risk level can be very useful to make prevention plan or take measures at construction sites. This is study result can change existing risk level concept to new concept of it, namely rail way work and in-water work showed be high risk level and RC work be low risk level, different from the situation which we have thought commonly, so far.

• Journal of muscle and joint health
• /
• v.21 no.2
• /
• pp.135-144
• /
• 2014

Purpose: The purpose of this study was to analyze and clarify the concept of shift work maladaptation syndrome and to facilitate development of interventions for the shift work adaptation. Methods: This study used Walker and Avant's concept analysis process. Results: Shift work maladaptation syndrome can be defined as the following attributes: 1) destruction of the circadian rhythm, 2) existence of a threshold, 3) individual characteristics (year of career, type of personality, and type of coping) 4) somatization, and 5) negative emotional conditions. The antecedents of shift work maladaptation syndrome consist of counterclockwise shift work, irregular shift cycle, night work which is breaking circadian rhythm, and lifestyle changing. The consequences as a result of shift work maladaptation syndrome are deterioration of health (gastrointestinal, neuro-psychic, cardiovascular function), reduction of social relationships, and turnover or resign. Conclusion: The results of this study can be useful as the foundation of shift work adaptation implementation.