• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.69-76
• /
• 2000

Bubble boom may be a good alternative for the prevention of oil spill pollution due to its easy deployment and clean post-process tasks. The present work is focused on the experimental investigation of air bubble movement for the bubble boom by visualization and quantitative PIV measurements. Bubble plume was generated by adjusting the pressure of pressure vessel ranging 6.7 kpa to 14.7 kpa. The results showed at lower inlet velocity and higher supply air flow rate that bubble boom maintained its containing capability reasonably well up to the maximum containing limit.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.179-184
• /
• 2001

The objective of this work is to develop the capability to analyze accurately the mixed-mode propagation of a crack in composite structures with elastic orthotropic material stiffness properties and anisotropic material strength characteristics. We employ the normal stress ratio theory to predict the direction of crack extension. It is shown that the angle of crack extension can be altered by the use of second order term in the series expansion is important for the accurate determination of crack growth direction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.901-908
• /
• 1988

In machining die cavities or mechanical parts, we often encounter the needs to remove a material within a given boundary. Even though this pocket cutting capability has been implemented in many NC packages, most of them can handle convex shaped pockets bounded by curves of limited types and numbers. In this work, a procedure has been developed to machine pockets of a free surface bounded by lines, circular arcs and free curves. Also, the cutter location data is computed directly without using iterative method for better computational efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.76-81
• /
• 1988

As a means of human interface, this study designs Developed-ERES/WCS with voice recognition capability and fuzzy set theory. In the advanced teleoperator system, when an error occurs on the automatic mode, the error is recovered after the automatic mode is changed into the manual mode intervened by a human. The purpose of this study is to reduce human work load and to shorten error recovery time during error recovery.

• 천문학회보
• /
• 제42권2호
• /
• pp.51.2-51.2
• /
• 2017

As a result of our decade-long effort, we developed a new approach wherein small-aperture telescope powered by ingeniously designed narrow-band filter systems can have the capability to measure not only the heavy but also the lighter elemental abundances of the red-giant branch (RGB) and asymptotic-giant branch (AGB) stars in the globular clusters. Our novel approach can complement the intrinsic weakness of the results from the prestigious instruments, such as HST and the VLT. In our talk, we will present the multiple stellar populations of the RGB and the AGB stars in M5, as a pilot work.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.675-680
• /
• 1990

According to the recent increase of demands for multi-function and economics on hydraulic excavator, it is required that excavator should have simple operation, higher and operational efficiency. However, it is difficulty for current hydraulic system to satisfy demands fully. This study shows that new control system improves power transmission efficiency, work capability of engine and hydraulic system of current excavator.

• 한국국방경영분석학회지
• /
• 제10권1호
• /
• pp.65-86
• /
• 1984

This thesis presents a design and partial implementation of a program family of extended pretty printers. Factors that influence the readability (perception) and understand ability (cognition) of computer programs are indentified, previous work is reviewed, and new solutions are suggested. Extensions to the previous pretty printer designs include a capability to selectively display levels of control of a program. In order to accommodate different computer languages and to allow for, several secondary functions, a family of pretty printers is designed. This design facilitates easy extension, contraction and modification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.780-785
• /
• 2004

The work presented here deals with controller design by graphical method based on proportional control ramp response. The design aims at the improvement of transient response, disturbance rejection capability, steady-state error reduction with stability preservation. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권3호
• /
• pp.165-176
• /
• 2009

The risk management case is an organization's formal arrangement to ensure the safety of its work activity within risk management system. It allows an organization to demonstrate its capability in achieving its safety objectives and in meeting regulatory requirements. This paper presents how the safety assessments are described, prepared and maintained to meet the criteria specified by the upcoming safety regulations. We propose the elements of risk management system that include arrangements for the ongoing identification of hazards, assessment of risks and the implementation of necessary control measures.

• 패션비즈니스
• /
• 제10권6호
• /
• pp.28-37
• /
• 2006

The purpose of this work is to present three-dimensional models of plain fabrics having various warp and filling yarn diameters. In order to simulate a woven fabric, a 3-dimensional CAD software with NURBS modeling capability was used. Final rendering was performed on the fabric model. It was demonstrated that the changes in yarn diameter could be three-dimensionally modeled through the use of fabric geometry and the 3D CAD. A short RhinoScript program was composed to implement the data importing and model building on the 3D CAD.