• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.248-256
• /
• 1995

The electrical conducton in the sintered 3Bi2O3.WO3 solid electrolyte was investigated by measuring the conductivity and ionic transport number. The electrical conductivity was about three to ten times higher than that of YSZ at temperatures between 300 and 80$0^{\circ}C$. D.C. polarization method confirmed that 3Bi2O3.WO3 was predominantly an ionic conductor. Unlike the instability of high conductive fcc phase in the rare-earth oxide-Bi2O3 or Y2O3-Bi2O3 systems at temperature below $700^{\circ}C$, fcc phase in the 3Bi2O3.WO3 exhibited no transformation even after annealing over 900 hrs at 600 and $650^{\circ}C$. Two samples which had different grain sizes showed almost the same conductivity. This result suggests that the electrical properties of grain and grain boundry were very similar.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.61-66
• /
• 2001

NiO-doped $WO_3$ thick films were prepared by a screen printing technique. The electrical property and microstructure of the films were investigated with the partial pressure of oxygen and the amount of NiO. The grain size of NiO-doped $WO_3$ was smaller than that of undoped $WO_3$, but the grain size of 0.1, 1, 10 mol% NiO-doped $WO_3$ were nearly the same. The electrical conductance of the $WO_3$ thick films decreased with the oxygen partial pressure, and increased with the amount of NiO to the limit of solid solution. The variation of the electrical conductance with temperature is not so large in the extrinsic region, but it changed rapidly in the intrinsic region. The conductance decreased with adsorption of oxygen in the intermediate range between the extrinsic and intrinsic region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.342-343
• /
• 2005

In this study,. the microwave dielectric properties of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics with sintering temperature were investigated for LTCC application. According to the X-ray diffraction patterns, the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics had columbite structure of the $TiTe_3O_8$ phase and scheelite structure of the $CaWO_4$ phase. Increasing the sintering temperature, the bulk density, the dielectric constant and the quality factor of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics were increased. In the case of the $0.6TiTe_3O_8-0.4CaWO_4$ ceramics sintered at $810^{\circ}C$, the bulk density, the dielectric constant and the quality factor were 5.72$g/cm^2$, 33.6, 22,013GHz respectively.

• 한국결정성장학회지
• /
• 제21권4호
• /
• pp.181-186
• /
• 2011

$WO_3$ 첨가가 $TiO_2$계 SCR 촉매의 고온안정성에 미치는 영향을 구조적, 형상학적 분석을 통해 규명하였다. 순수한 $TiO_2$시편과 10 wt%의 $WO_3$를 첨가한 $WO_3-TiO_2$ 시편을 제조하여 $800^{\circ}C$에서 5시간 동안 열적 스트레스를 인가하였다. FT-IR을 이용하여 촉매의 산점 변화를 확언한 결과 $WO_3-TiO_2$ 시편의 경우가 순수한 $TiO_2$ 시편에 비해 열적 열화로 인한 산점의 감소가 상대적으로 적었다. 반면 $WO_3-TiO_2$ 와 $TiO_2$의 anatase에 서 rutile로의 상전이 정도는 각각 28.4%와 22.9%로 오히려 $WO_3-TiO_2$ 시편에서 rutile 상이 더 많이 증가한 것을 확인하였다. 형상학적 분석 결과 $WO_3-TiO_2$ 시편은 고온에서 $TiO_2$에 고용되어 있던 amorphous 상태의 $WO_3$가 $TiO_2$ 입자 표면에 석출되며 결정화가 일어나게 되고 이로 인해 촉매의 입자성장을 억제함을 확인하였다. 따라서 SCR용 $TiO_2$ 촉매에 첨가된 $WO_3$는 anatase에서 rutile로의 상전이를 촉진시켜 고온에서의 촉매 활성을 저하시킬 수 있지만, 입성장 억제에 대한 영향이 커 결과적으로 고온안정성을 향상시킴을 확인하였다.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.6-12
• /
• 2014

In the present work, $WO_3$ and $WO_3-TiO_2$ were prepared by the chemical deposition method. Structural variations, surface state and elemental compositions were investigated for preparation of $WO_3-TiO_2$ sonocatalyst. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and transmission electron microscopy (TEM) were employed for characterization of these new photocatalysts. A rhodamine B (Rh.B) solution under ultrasonic irradiation was used to determine the catalytic activity. Excellent catalytic degradation of an Rh.B solution was observed using the $WO_3-TiO_2$ composites under ultrasonic irradiation. Sonocatalytic degradation is a novel technology of treating wastewater. During the ultrasonic treatment of aqueous solutions sonoluminescence, cavitaties and "hot spot" occurred, leading to the dissociation of water molecules. In case of a $WO_3$ coupled system, a semiconductor coupled with two components has a beneficial role in improving charge separation and enhancing $TiO_2$ response to ultrasonic radiations. In case of the addition of $WO_3$ as new matter, the excited electrons from the $WO_3$ particles are quickly transferred to $TiO_2$ particle, as the conduction band of $WO_3$ is 0.74 eV which is -0.5 eV more than that of $TiO_2$. This transfer of charge should enhance the oxidation of the adsorbed organic substrate. The result shows that the photocatalytic performance of $TiO_2$ nanoparticles was improved by loading $WO_3$.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.281-288
• /
• 1997

유전율이 높고 온도안정성이 우수하다고 알려져 있는 40Pb(Mg1/3Nb2/3)O3-30PbTiO3-30Pb(Mg1/2W1/2)O3계 세라믹스에 소결온도를 낮추기 위하여 저온에서 액상을 형성하는 91PbO-9WO3를 과잉첨가하여 소결성, 미세구조 및 유전성의 변화에 대하여 조사하였다. 91PbO-9WO3의 첨가량이 증가함에 따라 소결온도가 저하하였으며 6 mol%첨가시는 875$^{\circ}C$에서 소결이 가능하였다. 유전율은 기본조성에서 16,400이었고, 첨가제가 1 mol% 과잉첨가된 경우 18,500으로 최대값을 나타냈으며 이후 첨가량이 증가함에 따라 감소하였다. 첨가제의 첨가량이 2~4mol%인 시편의 온도에 따른 유전율 변화곡선에서 double peak maxima가 나타났으나, 첨가량이 5 mol% 이상인 시편에서는 입계에 텅스텐을 많이 포함하고 있는 결정상이 생성되었고 double peak maxima는 나타나지 않았다.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.518-522
• /
• 2013

사이클로헥사논은 나일론의 단량체로 사용되는 카프로락탐의 원료로 중요한 중간체이며 사이클로헥사놀의 탈수소화반응을 통해 합성된다. 본 연구에서는 탈수소화 반응에 적용하기 위한 촉매로 다양한 메조기공을 가진 금속 산화물(meso-$WO_3$, meso-$TiO_2$, meso-$Fe_2O_3$, meso-CuO, meso-$SnO_2$, meso-NiO)을 나노 복제법에 의해 합성하였다. 그 결과 meso-$WO_3$ >> meso-$Fe_2O_3$ > meso-$SnO_2$ > meso-$TiO_2$ > meso-NiO > meso-CuO 순서로 촉매 활성이 나타났으며, 그 중 meso-$WO_3$가 가장 높은 촉매 활성을 보임을 알 수 있었다. 따라서 사이클로헥사놀을 이용한 탈수소화 반응에 meso-$WO_3$의 폭넓은 응용 가능성을 확인하였다.

• 한국분말재료학회지
• /
• 제22권5호
• /
• pp.326-330
• /
• 2015

In this study, we demonstrate the photoelectrochromic devices composed of $TiO_2$ and $WO_3$ nanostructures prepared by anodization method. The morphology and the crystal structure of anodized $TiO_2$ nanotubes and $WO_3$ nanoporous layers are investigated by SEM and XRD. To fabricate a transparent photoelectrode on FTO substrate, a $TiO_2$ nanotube membrane, which has been detached from Ti substrate, is transferred to FTO substrate and annealed at $450^{\circ}C$ for 1 hr. The photoelectrode of $TiO_2$ nanotube and the counter electrode of $WO_3$ nanoporous layer are assembled and the inner space is filled with a liquid electrolyte containing 0.5 M LiI and 5 mM $I_2$ as a redox mediator. The properties of the photoelectrochromic devices is investigated and Pt-$WO_3$ electrode system shows better electrochromic performance compared to $WO_3$ electrode.

• 대한화학회지
• /
• 제67권1호
• /
• pp.33-41
• /
• 2023

Nanocrystallne WO₃ and MoO₃ with several different sizes and crystal structures were prepared by simple acid precipitation and subsequent heat treatment. The photochromic (PC) properties of these samples were comparatively investigated in powder state by monitoring diffuse reflectance spectral changes after bandgap irradiation. The PC effect of hexagonal WO₃ and monoclinic WO₃ strongly depended upon crystallite size rather than crystal structure. The smaller the crystallite size, the better the PC effect. However, orthorhombic WO·H₂O and MoO₃ having hexagonal and orthorhombic structures did not follow this trend. One consistent result for all WO₃ and MoO₃ samples is that the heat treatment in air, which changes crystallinity, whether it changes the crystal structure or only the crystallite size, reduces the PC effect. Since the thermal treatment reduces the surface oxygen defect sites, we believe that the PC effect of WO₃ and MoO₃ depends critically on the surface oxygen defect sites that serve as deep trap sites for photogenerated electrons and oxygen radical holes. We also found that the proton insertion claimed by double charge injection model is not critical for the PC effect.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.