• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.114-115
• /
• 2019

이 논문은 무선 전력 전송을 이용하는 마우스의 급전 패드와 리시버 설계 방법을 제안한다. 마우스의 급전 패드는 코일의 턴간 간격을 불균등하게 조절하여 균일한 자기장을 급전 패드 상에서 얻게 하며, 집전코일은 급전코일과 비교해 크기가 작기 때문에 낮은 결합계수와 품질계수를 가져 원하는 전압을 얻기 어려운데 이를 위해 PCB 코일을 멀티레이어로 제작하고 PCB 패턴의 폭을 조절하여 높은 인덕턴스를 갖게 설계한 후 유한요소해석을 통해 설계한 시스템을 시험했다.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.283-286
• /
• 2011

Path loss plays fundamental roles in system design, spectrum management, and performance evaluation. The traditional path loss model has a slight inconvenience; it depends on the unknown distance. In this letter, we explore the probability distribution function (PDF) of path loss in an indoor office environment by randomizing out the distance variable. It is shown that the resulting PDF is not Gaussian-like but is skewed to the right, and both the PDF and the moments are related to the size of the office instead of the unknown distance. To be specific, we incorporate the IEEE 802.15.4a channel parameters into our model and tabulate the cumulative distribution function with respect to different room sizes. Through a simple example, we show how our model helps a cognitive spectrum user to infer path loss information of primary users without necessarily knowing their transmitter-receiver distance.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.383-383
• /
• 2004

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• Journal of Biomedical Engineering Research
• /
• v.21 no.5
• /
• pp.513-517
• /
• 2000

In this study, we fabricated the advanced telemetry system that transmitting media use radio frequency(RF) for the middle range measurement of the physiological signals and receiving media use optical for electromagnetic interference problem. The telemetry system within a size of 65$\times$125$\times$45mm consists of three parts: a RF transmitter, a optical receiver and a physiological signal processing CMOS one chip. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum which enables a comfortable bed-side telemetry system.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.127-134
• /
• 2022

In this paper, a low-cost, flexible GPS simulator based on USRP is designed as a general-purpose software wireless front-end. The simulator consists of a software GPS signal generator and a USRP-based RF transmitter. The simulator supports various scenarios including specified reception time, quantization bit level, I/Q data types, IF frequency, sampling frequency, SNR, ionospheric delay and user dynamics. The generated GPS RF signal is verified using the spectrum analyzer and off-the-shelf GNSS receivers such as U-blox M8T. The experimental results shows that the difference between generated and real live signal is ignorable. It is expected that designed GPS simulator can be used to GNSS signal design, receiver design and signal processing algorithms such as anti-jamming.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2247-2253
• /
• 2010

WiBro(Wireless Broadband Internet) is the standard of high-speed portable internet based on OFDMA/TDD (Orthogonal frequency division multiple access / Time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose performance improvements of WiBro system using the LVQ(Learning Vector Quantization) blind equalization. Proposed method used the prefiltering LVQ neural network blind equalization in the Broadband WiBro system receiver. The prefiltering LVQ neural network constellates 16QAM that is transmitter data shape and the blind equalization removes ICI(Inter Carrier Interference). To verificate the proposed method usability, the MSE(Mean Square Error) and the BER(Bit Error Rate) are simulated. The simulation results shown that is improved the performances of the proposed WiBro system using the LVQ blind equalization than the existing WiBro system.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.328-336
• /
• 2003

Bluetooth is a specification for short-range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area-efficient digital baseband module for wireless technology. For area-efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware-efficient functions, such as low-level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB)interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core no system-on-a-chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a $0.25-{\mu}m$ CMOS technology, the core size of which was only 2.79 $mm{\times}2.80mm$.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1025-1030
• /
• 2005

Cooperative communications among users in multiple access wireless environments is an efficient way to obtain the powerful benefits of multi-antenna systems without the demand for physical arrays. This paper proposes a solution to optimize the weights of partnering users' signals for the minimum error probability at the output of maximum likelihood (ML) detector under the transmit power constraints by taking advantage of channel state information (CSI) feedback from the receiver to the transmitter. Simulation programs are also established to evaluate the performance of the system under flat Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.5
• /
• pp.238-241
• /
• 2010

The purpose of this study is to solve the problems of radio frequency bandwidth frequency depletion, confusion possibilities, and security that are in current wireless communications systems, and to confirm the possibility of applying those solutions for the next generation network. To solve the problems of the current wireless communications system, a visible light communications system for power line communication (PLC) via 8-bit microcontroller is created and the capacity is analyzed. The exclusive PLC chip APLC-485MA, an 8-bit ATmega16 microcontroller, high brightness 5pi light emitting diodes (LEDs), and the LLS08-A1 visible light-receiving sensor were used for the transmitter and receiver. The performance was analyzed using a designed program and an oscilloscope. The voltage change was measured as a function of distance from 10-50 cm. Blue LEDs showed the best performance among the measured LED types, with 0.47 V of voltage loss, but for a distance over 50 cm, precise data was not easy to obtain due to the weak light. To overcome these types of problems, specific values such as the changing conditions and efficiency value relevant to the light emitting parts and the visible light-receiving sensor should be calculated, and continuous study and improvements should also be realized for better communication conditions.