• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1273-1279
• /
• 2000

A new concept of piezoelectric smart panels for noise reduction in wide band frequencies is proposed and their possibility is experimentally investigated. The proposed panels are based on active and passive methods. They use piezoelectric smart structure technology for active noise reduction at low band frequencies and passive sound absorbing materials for mid-range of noise frequencies. To prove the concept of piezoelectric smart panels, an acoustic measurement experiment was performed. The smart panels exhibit a good noise reduction in middle and high frequency ranges due to the mass effects of absorbing materials or/and the air gap. The use of piezoelectric smart panel renders noise reduction large at resonance frequency. Another concept of smart panel that uses piezoelectric damping is experimentally investigated. Since piezoelectric dampings can reduce vibration and noise at resonance frequencies with simple shunt circuit, they have merits in terms of economy and simplicity. Dissipated energy method(DEM) is adopted to tune the shunt circuit precisely in piezoelectric dampings. Noise reduction at multiple resonance frequencies is demonstrated.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.133-136
• /
• 2009

A newly designed Ag/$Ag^+$ reference electrode in a quartz tube with a tungsten tip junction (W-tip-Quartz- REF) was fabricated and its electrochemical performance was compared with a conventional Pyrex tube-based Ag/$Ag^+$ reference electrode (Py-REF). The results of the electrochemical potential measurements with the W-tip-Quartz- REF and the Py-REF in the LiCl-KCl eutectic melts for a wide temperature range proved that the oxide layer on the surface of the tungsten metal tip provided a high ionic conduction. Stability of our newly designed W-tip- Quartz-REF was tested by measuring a junction potential for 12 hours at 700${^{\circ}C}$. The results of the cyclic voltammetric measurement indicated that the Ag/$Ag^+$ reference electrode in the quartz tube with a tungsten tip junction can provide a good performance for a wide temperature range.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.10-17
• /
• 2009

야간경관에는 수많은 광원(光源)에 의해 다양한 휘도(Luminance)로 나타난다. 휘도를 측정하는데 있어 측정 범위가 한정되어 있다. 기존의 휘도계를 이용한 측정방식은 하나의 점을 통한 점(Point)측정방식이기 때문이다. 야간경관의 휘도를 쉽고 편리하게 정보를 얻고자 휘도 측정에 있어 DSLR 카메라를 이용하게 되었다. 현재 광학의 기술로 인해 디지털 카메라의 활용가치가 매우 크며 쉽게 이미지데이터를 얻을 수 있다. 이러한 디지털 이미지로부터 야간경관의 휘도 분석과 DSLR 카메라의 면(Scene) 측정방식을 통한 휘도 측정 기법에 대해 제안하고자 한다.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1276-1282
• /
• 2003

SMT 타입의 페라이트 비드(ferrite bead)는 전원단에서 발생되는 잡음(noise)이 회로 소자로 유입되는 것을 막기 위해 사용되는 소자로 병렬 캐패시터(capacitor)와 직렬 인덕터(inductor) 및 저항(resistor)을 이용하여 등가 모델화된다. 이와 같은 간단한 페라이트 비드의 등가 모델은 광대역 범위에서 측정 결과와 일치하지 않는다. 본 논문에서는 광대 역(50 MHz∼3 GHz)에서 정확한 페라이트 비드의 모델을 제시하고 페라이트 비드가 있을 때와 없을 때 전원단 잡음의 회로 소자에 미치는 영향을 고찰하였다.

• 대한전자공학회논문지SD
• /
• 제46권9호
• /
• pp.58-67
• /
• 2009

본 논문에서는 높은 대역폭과 넓은 동적 영역을 갖는 DVB-S2를 위한 새로운 디지털 이득 제어 시스템을 제안하였다. DVB-S2 시스템의 PAPR은 매우 크며, 요구되는 정착 시간은 매우 작기 때문에 일반적인 폐-루프 아날로그 이득 제어 방식은 사용할 수 없다. 정확한 이득 제어와 기저 대역 모뎀과의 직접적인 인터페이스를 위해서 디지털 이득 제어가 필요하다. 또한 아날로그 이득 제어 방식에 비해 정착 시간과 공정, 전압, 온도 값의 변화에 둔감한 이점을 갖는다. 본 논문에서는 세밀한 해상도와 넓은 이득 영역을 갖기 위해서 AGC 시스템 및 구성회로를 제안하였다. 이 시스템은 높은 대역폭의 디지털 VGA와 넓은 파워 범위를 가진 RMS 검출기, 저 전력의 SAR 타입 ADC, 그리고 디지털 이득 제어기로 구성되어 있다. 파워 소모와 칩면적을 줄이기 위해 한 개의 SAR 타입 ADC를 사용했으며, ADC 입력은 4개의 파워 검출기를 사용하여 시간 축 상에서 인터리빙 방식으로 구현하였다. 모의실험 및 측정 결과는 제안하는 AGC 시스템의 이득 에러가 $10{\mu}s$ 내에서, 0.25 dB보다 낮은 것을 보여주고 있다. 전체 칩은 $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였다. 제안된 IF AGC 시스템의 측정 결과는 0.25 dB의 해상도와 80 dB의 이득 범위, 8 nV/$\sqrt{Hz}$의 입력 기준 잡음, $IIP_3$는 5 dBm, 전력 소모는 60 mW임을 보여주고 있다. 파워검출기는 100 MHz 입력에서 35 dB의 동적 영역을 갖는다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.

• ETRI Journal
• /
• 제42권1호
• /
• pp.46-53
• /
• 2020

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel-strike and toe-off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel-strike and toe-off detection algorithm using a smart insole with inertial measurement units. This method detects heel-strike and toe-off events through a time-frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel-strike and toe-off detection algorithm yielded the largest error of 0.03 seconds for running toe-off events, and an average of 0-0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single-support time, and double-support time can all be estimated using the proposed heel-strike and toe-off detection algorithm.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.320-325
• /
• 2008

The recent industrial application requires technical methods to get the cutting fluid droplet surfaces in particular from the viewpoint of topography and micro texture. To characterize the surface topography of droplet, the combination of the confocal laser scanning microscope (CLSM) and wavelet filtering is well suited for obtaining the droplet geometry encountered in tribological research. This technique indicates a better agreement in obtaining an appropriate droplet surface obtained by the CLSM over a detail range of surface accuracy (resolution: $2{\mu}m$). And the results allow an excellent accuracy in a measurement of a droplet surface. The combination of extended focal depth measurement configured and multi-scale wavelet filtering has proven that it can construct a droplet surface in a successive and accurate way. A multi-scale approach of wavelet filtering was developed based on the decomposition and reconstruction of droplet surface by 2D wavelet transform using db9 (a mother wavelet of daubechies). Also this technique can be extended to characterize the quantification of droplet properties and other field in a wide range of scales. Finally this method is verified to be a better droplet surface modeling in a micro scale arising in a mist machining.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.651-653
• /
• 2000

In this study, a distance-measurement system was proposed by using principle of the Michelson Interferometer and a fundamental research was carried out. In case of the rnichelson interferometer, relativity distance was measured by relativity-difference of two course of light. But wavelength of light source were changed in this system in order to use interference phenomenon of michelson interferometer in measuring absolutely distance. Wavelength of input signal were changed periodically and were interfered electrically. So absolute distance can be calculated by using $\Delta\lambda$ and measuring $\eta\Delta$ in electric interference. Nose by a external factor was small in this system because a absolutely distance was measured by phase difference. And a dispersion of noise was small in pulse-echo response because a error was occurred in range of phase difference of signal. Also very wide range can be measured by only single system because informations of distance were acquisited in wavelength level.

• 센서학회지
• /
• 제24권2호
• /
• pp.131-136
• /
• 2015

This paper presents a wide dynamic range complementary metal oxide semiconductor (CMOS) image sensor with column capacitor and feedback structure. The designed circuit has been fabricated by using $0.18{\mu}m$ 1-poly 6-metal standard CMOS technology. This sensor has dual mode operation using combination of active pixel sensor (APS) and passive pixel sensor (PPS) structure. The proposed pixel operates in the APS mode for high-sensitivity in normal light intensity, while it operates in the PPS mode for low-sensitivity in high light intensity. The proposed PPS structure is consisted of a conventional PPS with column capacitor and feedback structure. The capacitance of column capacitor is changed by controlling the reference voltage using feedback structure. By using the proposed structure, it is possible to store more electric charge, which results in a wider dynamic range. The simulation and measurement results demonstrate wide dynamic range feature of the proposed PPS.