• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1939-1944
• /
• 2000

Different test methods were used to measure and compare the loss factor of a steel beam. They are free vibration logarithmic decay method, half-power bandwidth method using narrow-band analysis, wide-band analysis method with inverse FFT. In these tests, specimens are clamped at one end. Free vibration method and half-power bandwidth method gave good results. Effect of vibration pick-ups were tested. We also tried center excitation method but could not obtain loss factor.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.221-224
• /
• 1995

In speech signal processing, it is necessary to detect exactly the pitch. The algorithms of pitch extraction with have been proposed until now are difficult to detect pitches over wide range speech signals. In this paper, thus, we proposed a new pitch detection algorithm that used a low pass filter with variable bandwidth. It is the method that preprosses to find the first formant of speech signals by the FFT at each frame and detects the pitches for signals LPFed with the cut off frequency according to the first formant. Applying the method, we obtained the pitch contours, improving the accuracy of pitch detection in some noise environments.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.23-29
• /
• 2004

In this paper we analyze convergence constraints and time constant of IT-LMS algorithm and derive a method of making it's time constant independent of signal power by using input variance estimation. The method for estimating the input variance is to use a single-pole low-pass filter(LPF) with common smoothing parameter value, θ. The estimator is with narrow bandwidth for large θ but with wide bandwidth for small θ. This small θ gives long term average estimation(low frequency) of the fluctuating input variance well as short term variations (high frequency) of the input power. In our simulations of multipath communication channel equalization environments, the method with large θ has shown not as much improved convergence speed as the speed of the original IT-LMS algorithm. The proposed method with small θ=0.01 reach its minimum MSE in 100 samples whereas the IT-LMS converges in 200 samples. This shows the proposed, tap-power normalized IT-LMS algorithm can be applied more effectively to digital wireless communication systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.553-556
• /
• 2002

인터넷과 World Wide Web의 폭발적인 성장은 네트워크에 많은 정보와 리소스를 제공하고 있다. 그렇지만, 대부분의 사용자들에게 있어서 인터넷 리소스의 사용은 Bandwidth에 의하여 많은 제한을 받고 있다. 그러나 애플릿 방식을 통해서 HTML이 가지고 있는 정적인 면과 CGI의 bandwidth에 따르는 성능 저하 문제를 해결할 수 있다. Mobile Agent는 사용자의 특정 목적을 성취하기 위해서 사용자의 컴퓨터에서 출발하여 네트워크를 이동하면서 작업을 수행한다. 이렇게 수행할 수 있는 코드가 네트워크를 통하여 전송되고, 네트워크에서 수행되기 때문에, 자연스럽게 mobile code의 보안에 중요한 문제가 발생한다. 본 연구에서는 이러한 Mobile Agent를 사용하는 분산 웹 환경에서, Mobile Agent를 호스트와 Agent를 보호할 수 있는 방안을 모색보고, Mobile Agent 의 개념과 Mobile Agent를 구성하면서 생기는 문제를 기술하고, 이러한 문제를 해결하기 위해서 연구중인 방법을 제시하고, 제시된 방법 중에서 현실적으로 적용 가능한 방법을 사용하여 이동 에이전트의 보안 시스템을 설계해 보도록 한다.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2010

In this paper, an ultra-wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi-arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm ${\times}$ 10 mm ${\times}$ 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.

• IE interfaces
• /
• v.9 no.3
• /
• pp.22-33
• /
• 1996

The KOREASAT satellite, the first Korean commercial communication and broadcasting satellite, has been launched in August 1995, and has started to provide the communication and preliminary broadcasting services, respectively, in March and July 1996. In this paper the network configurations and characteristics of the services which the KOREASAT satellite provides are described. The services, which are provided by the KOREASAT satellite with its twelve communication and four broadcasting transponders, are the direct broadcasting service, the video relay service including the TVRO, SNG and TV/CATV program distribution, the company-wide communication service including VSAT and TSAT, and the other services with the digital line, trunk relay, telephone line, mobile data, music broadcasting services, etc. A communication transponder has the 36MHz bandwidth and 14W output power, and a broadcasting transponder has the 27MHz bandwidth and 12OW output power.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.486-492
• /
• 2004

The emergence of wide channel bandwidth wireless standards requires the use of a highly linear, wideband integrated CMOS baseband chain with moderate power consumption. In this paper, we present the design of highly linear, wideband active RC filters and a digitally programmable variable gain amplifier. To achieve a high unity gain bandwidth product with moderate power consumption, the feed-forward compensation technique is applied for the design of wideband active RC filters. Measured results from a $0.5{\mu}m$ CMOS prototype baseband chain show a cutoff frequency of 10 MHz, a variable gain range of 33 dB, an in-band IIP3 of 13 dBV, and an input referred noise of 114 ${\mu}Vrms$ while dissipating 20 mW from a 3 V supply.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.411-416
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, high accuracy and wide frequency bandwidth of sensors are important. The focus in this paper is to make a fiber optic sensor for monitoring rotor of magnetic bearing, to design the circuit for detecting optical signal, and to evaluation static and dynamic characteristics of fiber optic sensor.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.985-988
• /
• 2011

A novel application of a dual-transmission line is proposed to design a lowpass filter (LPF). The proposed structure uses only transmission line elements to produce an equiripple LPF response with sharp roll-off. Design equations are derived using a lossless transmission line model. Controlling the electrical lengths, three transmission-zeros are realized in the stopband to obtain a sharp roll-off rate and wide stopband bandwidth. A single unit microstrip LPF with a 3-dB cut-off frequency at 1.0 GHz having a roll-off of 135 dB/GHz along with a stopband bandwidth of 69.5% is designed for validation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.58-64
• /
• 2001

A microstrip patch antenna with B-WLL applications is designed and manufactured. To make a array antenna the size of patch antenna was miniaturized. A broad band is obtained by two additional parasitic elements, which are closely located to the main patch. The bandwidth of the manufactured antenna is 15% at the center frequency of 26.8 GHz. Radiation patterns are measured over a wide bandwidth.