• Title/Summary/Keyword: WiBro

Search Result 533, Processing Time 0.028 seconds

Analysis on Effect of Interference between Different Communication Systems in Broadcasting Channel (방송채널에서 이종 통신시스템간 간섭의 영향 분석)

  • Kim, In-Hwan;Baik, Heung-Ki;Cho, Ju-Phil
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.10
    • /
    • pp.7-12
    • /
    • 2011
  • The effect of frequency interference situation between WiBro and WLAN in TV White Space band was taken into account in this paper. We assumed the using frequency in each system is applied in co-channel. When it comes to co-channel interference case, the minimum distance between WiBro ME and WLAN UE should be at least 210m if the maximum transmitter power of WiBro UE of 25dBm is limited. Analysis results of this paper can provide efficient reference and guideline to make spectrum plan for deploying WiBro and WLAN in TVWS.

An Analysis of 3GPP LTE-Advanced Service Introduction and WiBro Active Factors in the Next-generation Telecommunications Service Environment (차세대 통신서비스 환경에서 3GPP LTE-Advanced 도입과 와이브로(WiBro) 활성화 요인분석)

  • Lee, Yong-Suk;Cho, Sang Sup;Kang, Shin-Won
    • Informatization Policy
    • /
    • v.18 no.1
    • /
    • pp.45-54
    • /
    • 2011
  • The purpose of this study is to analyze the selection behavior decision model of telecommunications service under the telecommunication environments with joining the WiBro and 3GPP LTE-Advanced service at the sam time. The research results are as follows. First, mobile telecommunication service selection behavior is correlated with each other between WiBro and 3GPP LTE-Advanced service. Second, in the bivariate probit model estimates such as age, income, expenditure and income variable are important decision variables of WiBro and 3GPP LTE-Advanced service selection behavior. Gender and service using years, however, are not an important variables. The single and bivariate probit estimate results show the same estimation results. Finally, the two service selecting predictions by using the bivariate probit estimated results, 28.6% of WiBro and 25.3% of 3GPP LTE-Advanced were expected. Also, chance to join the two telecommunications services simultaneously is 19.3%. Therefore, WiBro selection probability is a little higher than 3GPP LTE-Advanced. The implications of these results, the future telecommunications service selection will be determined by economic factors such as income and expenditure. Thus, to enable the WiBro, policy means for reducing the excessive telecommunications expenditure are needed in the future.

  • PDF

Design for Isolation Improvement between 2-Channel WiBro-MIMO and PCS Band Antenna (2-CH WiBro Band MIMO 안테나와 PCS 안테나 간의 격리도 향상을 위한 설계)

  • Kim, Min-Seong;Min, Kyeong-Sik
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.1
    • /
    • pp.79-86
    • /
    • 2008
  • This paper presents to improve of isolation characteristics between personal communication service(PCS) antenna In mobile terminal and 2-channel multi input multi output(MIMO) antenna in the wireless broadband Internet(WiBro) band. In order to improve the isolation between each channel antenna, the proposed PCS antenna with an air space of 3 mm height is located on the projected ground plane($25{\times}12mm$) which is very small space$(0.19{\lambda})$ between the 2-channel WiBro-MIMO antenna. The proposed PCS antenna structure is a modified planar inverted F antenna (PIFA) of spiral type with shorting strip line(6${\times}$4 mm). The calculated Isolation values between the proposed PIFA with 3-dimensional structure and the MIMO antenna at Wibro band are about -20dB below and agree well with the measurement. Measured return loss, bandwidth, and gain o# the proposed antenna are -20dB at 1.8GHz, 110MHz(1.76${\sim}$1.87 GHz) band at -10dB below, and 0.05dBi, respectively, Moreover, we confirm that the proposed PCS antenna has no influence on performance and characteristics of the conversional 2-channel WiBro-MIMO antenna.

The Design of Wideband Dipole Antenna using Four Rings (4개의 링 구조를 사용한 광대역 다이폴 안테나 설계)

  • Kim, Sang-Uk;Lee, Woon-Jong;Oh, Su-Hyun;Lee, Cheon-Hee;Park, Hyo-Dal
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.5
    • /
    • pp.53-59
    • /
    • 2011
  • In this paper wideband dipole antenna that is usable as PCS/WCDMA/WiBro/WiMax public relay station antenna is proposed. The proposed antenna that designed by using double ring structure improves bandwidth performance of existing dipole antenna to wideband performance. To verify wideband performance and isotropic radiation pattern of the proposed antenna, simulation and fabrication have progressed its radiation characteristic has measured and then compared with calculated result. Measured result is similar to calculated result and has gain of 2dB VSWR of 2:1 over 1.75~3GHz. It is considered that the dipole antenna that designed in this paper can be usable as PCS/WCDMA/WiBro/WiMax public relay station antenna.

4세대 이동통신 핵심기술 WiBro-Advanced 시스템 개발

  • Park, Yun-Ok;Hong, Eon-Yeong;Gwon, Dong-Seung
    • Information and Communications Magazine
    • /
    • v.28 no.6
    • /
    • pp.84-90
    • /
    • 2011
  • 본 논문은 2011년 4월 IEEE SA에서 차세대 이동통신 규격으로 승인된 IEEE 802.16m의 구현에 관한 것이다. 승인된 규격은 ITU-R에서 4세대 이동통신 표준인 IMT-Advanced 표준 기술로 확정될 예정이며, 국내에서는 WiBro-Advanced, 해외에서는 Wireless MAN-Advanced 또는 WiMAX-2로 불린다. 이 규격을 기반으로 2009년부터 규격의 표준화 활동과 함께 시스템 개발을 시작하여, 2010년 12월 1차 개발을 완료하였다. 개발된 WiBro-Advanced 시스템은 ITU-R이 요구하는 4세대 이동통신의 요구사항을 만족하고 있다. 본 논문은 구현된 시스템의 핵심 기술에 대해 기술하고, 기술적인 특징들을 살펴본다.

Triple-band Compact Chip Antenna Using Coupled Meander-line Structure for Mobile RFID/PCS/WiBro (결합 미엔더 선로를 이용한 모바일 RFID/PCS/WiBro 삼중 대역 소형 칩 안테나)

  • Lim Hyoung-Jun;Lee Hong-Min
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.2 s.105
    • /
    • pp.178-183
    • /
    • 2006
  • The proposed triple-band compact chip antenna using coupled meander line and stacked meander structure for mobile RFID/PCS/WiBro. The proposed antenna is designed to operate at 900, 1,800, and 2,350 MHz, and is realized by parasitic coupled and stacked a meander line. Meander lines are using extend length of effective current path more than monopole and contribute miniaturization. The coupled meander line controls the excitations of the mobile RFID and PCS, stacked meander line controls the excitation of the WiBro. The fabricated antenna size is $10.98{\times}22.3{\times}0.98\;mm$. The resonance frequencies are 905 MHz, 1.77 GHz and 2.32 GHz. The impedance bandwidths are 24 MHz, 140 MHz and 92 MHz. The maximum gains of antenna are 0.34 dBi, 2.58 dBi and 0.4 dBi at resonance frequencies.

Design and Implementation of Dual-Mode SDR Modem Platform (듀얼모드 SDR 모뎀 플랫폼의 설계 및 구현)

  • Yun, Yu-Suk;Choi, Seung-Won
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.4A
    • /
    • pp.387-393
    • /
    • 2008
  • In this paper, we present an SDR (Software Defined Radio) handset modem platform which supports communication systems such as HSDPA (High Speed Downlink Packet Access), and WiBro (Wireless Broadband Portable Internet). The proposed SDR platform employs DSPs (Digital Signal Processors), FPGAs (Field Programmable Gate Arrays), and microprocessors in such a way that the various communication functions like HSDPA and WiBro can be programmed and downloaded to the hardware platform. The proposed SDR platform can be used for functional verification of the physical layers of the mobile handset system in the mobile communication network. We first demonstrate the receiving structure of the physical layer of the HSDPA and WiBro system. Then, the hardware implementation of the proposed SDR platform is shown with functions and optimized signal flows required at each mode. Finally, the link performance of each mode operating on the proposed SDR platform is presented through the internal loopback tests with the test vectors. The experimental performance has been compared with the computer simulation results.

Design and Fabrication of the H-Type Slot Antenna with Bazooka Balun for a WiBro Repeater (WiBro 중계기용 Bazooka 발룬이 내장된 H형 슬롯 안테나의 설계 및 제작)

  • Choi, Won-Jun;Kim, Che-Young
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.5
    • /
    • pp.515-522
    • /
    • 2008
  • In this paper, a slot antenna with built-in Bazooka balun aimed for a WiBro repeater was designed and fabricated. The return loss and radiation pattern of the slot antenna were improved due to the introduced Bazooka balun. This balun brings about even radiation pattern and keeps the stabilized coverage of repeater And it is easy to unite this balun with the antenna body by providing the terminal of Bazooka balun with screw shape. H-type slot was used to reduce the size of the antenna, and the slot antenna was fabricated in the structural symmetry with respect to a feeding point to afford the omni-directional radiation pattern. The simulated results were obtained by MWS(Microwave Studio Simulator) of CST company, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. The measured peak gain shows 5.75 dBi and the average gain is above -0.8 dBi. The return loss remains below -12.35 dB for all frequency bands in WiBro regarded as a good performance.

Performance Analysis using Markov chain in WiBro (WiBro에서 마코프 체인을 이용한 성능분석)

  • Park, Won-Gil;Kim, Hyoung-Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.1
    • /
    • pp.190-197
    • /
    • 2010
  • The ACR (Access Control Router) of WiBro processes location registration of the Correspondent Node and Home Agent as the Correspondent Node moves between ACRs. Therefore, the location update cost is low compared with MIPv6. However, all packets which are sent and received are sent through the ACR, so as the number of mobile nodes that are managed by the ACR increases, the cost of packet delivery also increases. Therefore, the communication state of the ACR domain remains smooth when the ACR which manages the mobile node in the ACR domain has good performance. However, network delays occur unless the ACR performs well, so the role of the ACR is important. In this paper, we analysis performance of the ACR for efficient realization of the WiBro standard. By using the Deny Probability and the Total Profit of ACR performance and apply it to the Random Walk Mobility model as the mobility model.

Implementation of Dual-Mode Channel Card for SDR-based Smart Antenna System (SDR기반 스마트 안테나 시스템을 위한 듀얼 모드 채널 카드 구현)

  • Kim, Jong-Eun;Choi, Seung-Won
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.12A
    • /
    • pp.1172-1176
    • /
    • 2008
  • In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.