• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.83-90
• /
• 2017

본 연구에서는 미세피치 패키지 적용을 위한 기초 실험으로 thin ENEPIG(Electroless Nickel Electroless Palladium Immersion Gold) 도금층을 형성하여 솔더링 특성을 평가하였다. 먼저, Sn-3.0Ag-0.5Cu (SAC305) 솔더합금에 대한 thin ENEPIG 도금층의 젖음 특성이 평가되었으며, 순차적인 솔더와의 반응에 대한 계면반응 및 솔더볼 접합 후 고속 전단 시험을 통한 접합부 기계적 신뢰성이 평가되었다. 젖음성 시험에서 침지 시간이 증가함에 따라 최대 젖음력은 증가하였으며, 5초의 침지 시간 이후에는 최대 젖음력이 일정하게 유지되었다. 초기 계면 반응 동안에는 $(Cu,Ni)_6Sn_5$ 금속간화합물과 P-rich Ni 층이 SAC305/ENEPIG 계면에서 관찰되었다. 연장된 계면반응 후에는 P-rich Ni 층이 파괴 되었으며, 파괴된 P-rich Ni 층 아래에는 $(Cu,Ni)_3Sn$ 금속간화합물이 생성되었다. 고속 전단 시험의 경우, 전단속도가 증가함에 따라 취성 파괴율이 증가하였다.

• 한국지반공학회논문집
• /
• 제28권4호
• /
• pp.91-100
• /
• 2012

부분포화토의 물리적 특징 중 하나인 함수특성곡선(soil-water characteristic curve)은 모관흡수력과 체적함수비의 관계를 나타낸다. 함수특성곡선은 지반의 습윤과정과 건조과정의 이력현상을 보여줄 수 있으나, 일반적으로 함수특성 곡선을 표현하는 방법은 이러한 이력현상을 무시한다. 또한 함수특성곡선의 고유한 형태는 흙의 간극비와 토립자들의 변형을 유발할 수 있는 외부의 여러 가지 하중들에 의해 언제든지 변화될 수 있다. 그러므로 여러 흙들이 가지고 있는 함수특성곡선과 토립자들 변형 사이의 관계에 대해서 실험적인 측면과 해석적인 측면의 차이점에 대해 이해가 필요하다. 실험적으로 1차 건조과정, 습윤과정 그리고 2차 건조과정으로 그려지는 전형적인 함수특성곡선들이 얻어진다. 이러한 이력현상을 갖는 함수특성곡선에서 습윤과정의 실험은 어려운 시험방법과 많은 시간소요가 필요하기 때문에 일반적으로 첫 번째 건조과정의 실험 결과를 불포화 투수계수와 전단강도 함수를 예측하기 위한 부분포화토의 물리적 특성으로 결정한다. 본 연구는 화강풍화토와 실트질 흙을 대상으로 유한요소해석 프로그램을 이용하여 부분포화토의 중요한 물리적 특성을 갖는 함수특성곡선의 1차 건조과정과 습윤과정 차이인 흙의 체적 변형과 이력현상에 대한 수리학적-역학적 흙의 거동특성을 비교 검토하였다.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.312-316
• /
• 2014

The joining behavior of forsterite ceramics to SUS304 alloy using $8PbO-78Bi_2O_3-8B_2O_3-4ZnO-2SiO_2$ (wt%) system glass frit was investigated. The contact angle was smaller than $90^{\circ}$ at a temperature of $460^{\circ}C$. Redox reaction at the interface between forsterite and SUS304 was found to appear when the electrons in the metal part moved toward the glass part and the oxygen ions in glass moved to the metal side. The decrease of the surface tension due to the PbO solubility on the forsterite side contributed to the better wetting behavior at low temperature.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권2호
• /
• pp.197-215
• /
• 2015

Modeling water flow in variably saturated, porous media is important in many branches of science and engineering. Highly nonlinear relationships between water content and hydraulic conductivity and soil-water pressure result in very steep wetting fronts causing numerical problems. These include poor efficiency when modeling water infiltration into very dry porous media, and numerical oscillation near a steep wetting front. A one-dimensional finite element formulation is developed for the numerical simulation of variably saturated flow systems. First order backward Euler implicit and second order Crank-Nicolson time discretization schemes are adopted as a solution strategy in this formulation based on Picard and Newton iterative techniques. Five examples are used to investigate the numerical performance of two approaches and the different factors are highlighted that can affect their convergence and efficiency. The first test case deals with sharp moisture front that infiltrates into the soil column. It shows the capability of providing a mass-conservative behavior. Saturated conditions are not developed in the second test case. Involving of dry initial condition and steep wetting front are the main numerical complexity of the third test example. Fourth test case is a rapid infiltration of water from the surface, followed by a period of redistribution of the water due to the dynamic boundary condition. The last one-dimensional test case involves flow into a layered soil with variable initial conditions. The numerical results indicate that the Crank-Nicolson scheme is inefficient compared to fully implicit backward Euler scheme for the layered soil problem but offers same accuracy for the other homogeneous soil cases.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.237-249
• /
• 2015

In this study we investigate a laboratory scale vacuum membrane distillation system to produce pure water from model oil in water emulsion. Experimental determination of liquid entry pressure (LEP) of a commercial Durapore$^{TM}$ GVPH flat sheet membrane using model emulsions in various oil concentrations has been carried out. Two different methods of liquid entry pressure determination - a frequently used, so-called static and a novel dynamic method - have been investigated. In case of static method, LEP value was found to be 2.3 bar. No significant effect of oil content on LEP was detected up to 3200 ppm. In contrast, LEP values determined with dynamic method showed strong dependence on the oil concentration of the feed and decreased from 2.0 bar to a spontaneous wetting at 0.2 bar in the range 0-250 ppm, respectively. Vacuum membrane distillation tests were also performed. The separation performance is evaluated in terms of flux behavior, total organic carbon removal and droplet size distribution of the feed and final retentate. No significant effect of oil content on the flux was found ($5.05{\pm}0.31kgm^{-2}h^{-1}$) up to 250 ppm, where a spontaneous wetting occurred. High separation performance was achieved along with the increasing oil concentration between 93.4-97.0%.

• 폴리머
• /
• 제32권4호
• /
• pp.313-321
• /
• 2008

UV개시에 의해 광경화형 아크릴 공중합체를 합성하고 제조된 아크릴 점착제(PSA)의 박리 에너지와 물리적 특성을 조사하였다. 이때 acrylic acid(AA)의 함량을 변화시켜 점착제의 물성을 변화시켰으며, 피착제의 표면 거칠기, 표면 요철방향, 점착제의 두께를 변화시킴으로써 박리 에너지의 변화 추이를 조사하였다. 공단량체인 acrylic acid의 함량이 증가함에 따라 표면 거칠기가 낮은 피착제가 높은 박리 에너지를 보였으며 점착제의 두께가 두꺼워 질수록 증가하였다. 또한 피착제 표면의 요철방향이 박리방향과 수평일 때 특히 높은 박리 에너지를 갖는 것으로 나타났다. 이것은 점착제의 두께 감소와 피착제 표면 거칠기의 증가가 wetting의 감소를 초래하지만 박리 시 저항력은 오히려 증가하는 경향을 나타내기 때문일 것이라는 예상과도 잘 일치한다.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2623-2627
• /
• 2011

We investigated the surface structure and wetting behavior of octaneselenolate self-assembled monolayers (SAMs) on Au(111) formed in a 50 ${\mu}M$ ethanol solution according to immersion time, using scanning tunneling microscopy (STM) and an automatic contact angle (CA) goniometer. Closely-packed, well-ordered alkanethiol SAMs would form as the immersion time increased; unexpectedly, however, we observed the structural transition of octaneselenolate SAMs from a molecular row phase with a long-range order to a disordered phase with a high density of vacancy islands (VIs). Molecularly resolved STM imaging revealed that the missing-row ordered phase of the SAMs could be assigned as a $(6{\times}{\surd}3)R30^{\circ}$ superlattice containing three molecules in the rectangular unit cell. In addition, CA measurements showed that the structural order and defect density of VIs are closely related to the wetting behaviors of octaneselenolate SAMs on gold. In this study, we clearly demonstrate that interactions between the headgroups and gold surfaces play an important role in determining the physical properties and surface structure of SAMs.

• 한국세라믹학회지
• /
• 제29권6호
• /
• pp.419-430
• /
• 1992

Fabrication possibility of low-shrinkage alumina without oxidation and wetting agent was presented on the basis of observation about oxidation behavior, microstructure and physical characteristics of such reaction agents free Al2O3-Al system. The composition less than Al 10w/o where Al can act as a sintering agent for Al2O3 was excluded. Under the condition of present experiments oxidation of Al2O3-Al system was dependent not on holding time but mainly on oxidation temperature. In thes case of Al powder not comminuted effectively during powder mixing of Al2O3-Al, columnar structure which would act as a hindrance to the densification during sintering developed more during oxidation with higher Al contents, and which made the fabrication of low-shrinkage Al2O3 ceramics impossible. If Al powder was comminuted effectively due to co-mixed Al2O3 characteristics, densification was improved because of no columnar structure and made the fabrication of sintered body with -2.7% dimensional change and 81% relative density possible. As a result, it is possible to fabricate dense low-shrinkage Al2O3 ceramics without oxidation and wetting agent under conditions such as smaller particle size of Al, Al contents below 50v/o, higher green density of Al2O3-Al compact and the use of Al2O3 powder used for high-density ceramics.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.171-178
• /
• 2009

$PM_{2.5}$ is one of critical air pollutants due to its high absorbability of heavy metallic fumes, PAH and bacillary micro organisms. Such a fine particulate matter is often formed through various nucleation processes including condensation. This study attempts to find the nucleation behaviors of $PM_{2.5}$ arisen from coal power stations using a classical heterogeneous Fletcher's theory. The numerical simulation by C-language could approximate the nucleation process of $PM_{2.5}$ from water vapor, of which approach revealed the required energy for embryo formation and embryo size and nucleation rate. As a result of the calculation, it was found that wetting agents could affect the particle nucleation in vapor condensation. In particular, critical contact angle relates closely with the vapor saturation. Particle condensation could be reduced by lowering the angles. The wetting agents aid to decrease the contact angle and surface tensions, thereby may contribute to save the formation energy.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.63-70
• /
• 1998

According to the stringent exhaust emission regulation control of air fuel ratio is one of the most important issues on gasoline engine. Although many researches have been carried out to identify the fuel transport phenomena in a port fueled gasoline engine, complexity of fuel film behavior in the intake port makes it difficult. The fuel film behavior was investigated recently by using visualization method and these gave us qualitative understanding. In this paper, the quantitative measurement method for the port fuel film is studied by using Fast Response Flame Ionization Detector(FRFID). The mass of fuel film on the port wall was measured by using the methods of fuel injection off, injection on and regression. The Fuel film mass was increased with incresing load at the same engine speed.