• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.237-241
• /
• 2014

본 연구에서는 상용화되는 AlN 웨이퍼(wafer)를 이용하여 molten KOH/NaOH 화학적 습식 에칭(Wet Chemical Etching)에 따른 표면변화 특성 및 최적의 에칭 조건을 조사하였다. AlN 웨이퍼를 $350^{\circ}C$에서 5분간 에칭 시 Al-face, N-face는 서로 다른 관찰되었다. 특히, Al-face는 에치핏의 형상을 파악하여 결함특성을 관찰하였고, 이로부터 결함 밀도를 계산하여 $2{\times}10^6/cm^2{\sim}10^{10}/cm^2$의 결과를 얻었다. N-face의 경우 육각 뿔(hexagonal pyramids) 형태의 격자결함이 형성되었다. 또한 AlN 웨이퍼의 성장 시 배향을 관찰하기 위해 XRD(X-Ray Diffraction, Rigaku, JAPAN)를 이용하여 분석한 결과 육방정 AlN의 C축 방향에 해당되는 (0002) 및 (0004) 면으로 배향된 상태임을 알 수 있었고, DC-XRD(Double Crystal X-ray Diffraction, bruker, Germany)를 이용하여 rocking curve의 위치에 따라 곡률 반경을 측정했을 때 1.6~17 m의 곡률을 가지고 있는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제24권11호
• /
• pp.1613-1617
• /
• 2003

In the phosphoric acid based etchant, the dissolution rates of Mo films were measured by microgravimetry and the corrosion potentials of Mo and Al were estimated by Tafel plot method with various concentrations of nitric acid. Dissolution rate of Mo increased with the nitric acid concentration and reached a limiting value at high concentration of nitric acid in ambient condition. Corrosion potentials of Mo and Al shifted to positive direction and the difference between potentials of both metals was about 1,100 mV and 1,200 mV with 1% and above 4% of $HNO_3$, respectively. For a Mo/Al bilayers, the dissolution rate inversion is the main reason for good taper angle in shower etching process. Taper angles are observed by scanning electron microscope (SEM) after wet etching process for Mo/Al layered films with different concentrations of $HNO_3$. In the etch side profile, it was found that Al corroded faster than Mo below 4% of $HNO_3$ in dip etching process, however, Mo corroded faster above 4%. Trend for variation of taper angle of etched side of Mo/Al layered film can be explained by considering the effect corrosion rates of both metals with various concentrations of $HNO_3$.

• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.748-753
• /
• 2009

The surface morphology and the surface roughness of n-type SiC induced by wet-treatment using 45% KOH and buffered oxide etchant (BOE-1HF : $6H_2O$) were investigated by atomic force microscopy (AFM). While Si-face of SiC could be etched by alkali solutions such as KOH, acidic solutions such as BOE were hardly able to etch SiC. When the rough SiC samples were used, the surface roughness of etched sample was decreased after wet-treatment regardless of etchant, due to the planarization the of surface by widening of scratches formed by mechanical polishing. It was observed that the initial etching was affected by the energetically unstable sites, such as dangling bond and steps. However, when a relatively smooth sample was used, the surface roughness was rapidly increased after treatment at $180^{\circ}C$ for 1 hr and at room temperature for 4 hr by using KOH solution, resulting from the nano-sized structures such as pores and bumps. This indicates that porous SiC surface can be achieved by using purely chemical treatment.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.697-702
• /
• 2019

In this study, using a wet chemical process, we evaluate the effectiveness of different solution concentrations in removing layers from a solar cell, which is necessary for recovery of high-purity silicon. A 4-step wet etching process is applied to a 6-inch back surface field(BSF) solar cell. The metal electrode is removed in the first and second steps of the process, and the anti-reflection coating(ARC) is removed in the third step. In the fourth step, high purity silicon is recovered by simultaneously removing the emitter and the BSF layer from the solar cell. It is confirmed by inductively coupled plasma mass spectroscopy(ICP-MS) and secondary ion mass spectroscopy(SIMS) analyses that the effectiveness of layer removal increases with increasing chemical concentrations. The purity of silicon recovered through the process, using the optimal concentration for each process, is analyzed using inductively coupled plasma atomic emission spectroscopy(ICP-AES). In addition, the silicon wafer is recovered through optimum etching conditions for silicon recovery, and the solar cell is remanufactured using this recovered silicon wafer. The efficiency of the remanufactured solar cell is very similar to that of a commercial wafer-based solar cell, and sufficient for use in the PV industry.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.283-287
• /
• 2014

Square lattice nano-hole arrays with diameters and periodicities of 200 and 500 nm, respectively, are fabricated on InGaN/GaN blue light emitting diodes (LEDs) using electron-beam lithography and inductively coupled plasma reactive ion etching processes. Cathodoluminescence (CL) investigations show that light emission intensity from the LEDs with the nano-hole arrays is enhanced compared to that from the planar sample. The CL intensity enhancement factor decreases when the nano-holes penetrate into the multiple quantum wells (MQWs) due to the plasma-induced damage and the residues. Wet chemical treatment using KOH solution is found to be an effective method for light extraction from the nano-patterned LEDs, especially, when the nano-holes penetrate into the MQWs. About 4-fold CL intensity enhancement factor is achieved by the KOH treatments after the dry etching for the sample with a 250-nm deep nano-hole array.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.668-675
• /
• 2013

We investigate the effect of the ageing time and etching time on the etching rate of SiGe mixed etching solution, namely 1 vp HF (6%), 2 vp $H_2O_2$ (30%) and 3 vp $CH_3COOH$ (99.8%). For this etching solution, we found that the etch rate of SiGe layer is saturated after the ageing time of 72 hours, and the selectivity of $Si_{0.8}Ge_{0.2}$ layer and Si layer is 20:1 at ageing time of 72 hours. The collapse was appeared at the etching time of 9min with etching solution of after saturation ageing time.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.72.2-72.2
• /
• 2000

• 한국재료학회지
• /
• 제31권10호
• /
• pp.569-575
• /
• 2021

The reactivity evaluation of copper is performed using ethylenediamine, aminoethanol, and piperidine to apply organic chelators to copper etching. It is revealed that piperidine, which is a ring-type chelator, has the lowest reactivity on copper and copper oxide and ethylenediamine, which is a chain-type chelator, has the highest reactivity via inductively coupled plasma-mass spectroscopy (ICP-MS). Furthermore, it is confirmed that the stable complex of copper-ethylenediamine can be formed during the reaction between copper and ethylenediamine using nuclear magnetic resonance (NMR) and radio-thin layer chromatography. As a final evaluation, the copper reactivity is evaluated by wet etching using each solution. Scanning electron micrographs reveal that the degree of copper reaction in ethylenediamine is stronger than that in any other chelator. This result is in good agreement with the evaluation results obtained by ICP-MS and NMR. It is concluded that ethylenediamine is a prospective etch gas for the dry etching of the copper.

• 마이크로전자및패키징학회지
• /
• 제19권1호
• /
• pp.39-45
• /
• 2012

Cu-Cu 패턴의 직접접합 공정을 위하여 Buffered Oxide Etch(BOE) 및 Hydrofluoric acid(HF)의 습식 조건에 따른 Cu와 $SiO_2$의 식각 특성에 대한 평가를 수행하였다. 접촉식 3차원측정기(3D-Profiler)를 이용하여 Cu와 $SiO_2$의 단차 및 Chemical Mechanical Polishing(CMP)에 의한 Cu의 dishing된 정도를 분석 하였다. 실험 결과 BOE 및 HF 습식 식각 시간이 증가함에 따라 단차가 증가 하였고, BOE가 HF보다 더 식각 속도가 빠른 것을 확인하였다. BOE 및 HF 습식 식각 후 Cu의 dishing도 식각시간 증가에 따라 감소하였다. 식각 후 산화막 유무를 알아보기 위해 Cu표면을 X-선 광전자 분광법(X-ray Photoelectron Spectroscopy, XPS)를 이용하여 분석 한 결과 HF습식 식각 후 BOE습식 식각보다 Cu표면산화막이 상대적으로 더 얇아 진 것을 확인하였다.

• 소성∙가공
• /
• 제12권7호
• /
• pp.640-646
• /
• 2003

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as potential application to fabricate the surface nanostructures because of its operational versatility and simplicity. The objective of the work is to suggest new mastless pattern fabrication technique using the combination of machining by nanoindenter and KOH wet etching. The scratch option of the nanoindenter is a very promising method for obtaining nanometer scale features on a large size specimen because it has a very wide working area and load range. Sample line patterns were machined on a silicon surface, which has a native oxide on it, by constant load scratch (CLS) of the Nanoindenter with a Berkovich diamond tip, and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structure was made because of masking effect of the affected layer generated by nano-scratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved patterns can be used as a mold that will be used for mass production processes such as nanoimprint or PDMS molding process. All morphological data of scratch traces were scanned using atomic force microscope (AFM).