• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.55-62
• /
• 2017

This paper aims to realize additional axes, which increase the processing efficiency of a robot by controlling in harmful environments. Ultimately, this is to create time and energy savings in industrial sites with 6-axis articulated welding robots (RS2). Using $RecurDyn^{(R)}$ a simulation technique is applied. The motion paths of the welding rod are compared for two cases in order to verify the necessity of the additional axes: 1) when there are no additional axes and 2) when there are additional axes during welding using the RS2. For this purpose, the angle variations of the RS2 axes required for the simulation are compared, on the assumption that each of the four points of the welding bed installed on the additional axes of the welding rod in $Solidworks^{(R)}$ is point-welded. Then, actual additional axes equipment is grafted on to the RS2 and the process times compared using $LabVIEW^{(R)}$.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.75-79
• /
• 2010

The Remote welding system(RWS) using $CO_2$ laser equipment has focusable distance of laser beam longer than 800 mm from workpiece and can deflect the laser beam by the scanner mirrors very rapidly. In the case of normal welding system based on robot, there is a limit to move the shortest path in short time and this causes interference between robot and workpiece. On the other hand, RWS is the optimized equipment to get big merits with advanced sequence of welding and short cycle time. However, there is still a pending task such as the control of plasma in the welding process of thick sheets therefore, it requires high power laser beam because of the absence of assist gas equipment in itself. In this study, high-tensile steel plates were overlap welded with $CO_2$ RWS for the production of car body and the influence of penetration depth according to the existence of assist gas was analyzed. Excellent tensile strength with enough width of molten zone independent to penetration depth was observed under welding condition with 3.6 kW laser power and 2.8 m/min welding speed without assist gas. Finally, the proto-type automotive parts were produced by applying the deduced optimal welding condition.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.30-36
• /
• 2017

In robot industries, the request to obtain a high efficiency and accurately controlled electric actuator has been growing. Nevertheless, the effectiveness of electric actuators is significantly affected by the presence of factors such as nonlinearity, uncertain disturbance and unknown dynamics. Therefore, it makes difficult to derive an exact mathematical model of the controlled system. In this paper, a new method for easily recognizing and regenerating robot motions used in small size industries such as painting and welding parts is proposed. Instead of modeling the entire dynamic motion of the robot system, this method is based on the procedure of modeling and controller design for every arm individually. The proposed method does not require complex model and control system such that it gives easy working process to the small size industries. Based on this fact, in this research, the model and PID controller for every arm of the 3 DOF robot system are obtained separately. Some experimental results are implemented to validate the effectiveness of the proposed method.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.115-116
• /
• 2008

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.706-713
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the eterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding Currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.113-121
• /
• 2005

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables us to check the errors in design before production. This paper deals with a case study of virtual manufacturing in an excavator factory. Boom and rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with CATIA and 3D simulation models are developed with IGRIP. These models are used for the design of fixture to verify the motion of the equipment. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which enables us to reduce the developing cost and time.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.97-103
• /
• 2014

In this paper, the authors consider a robot motion control to cope with painting, welding jobs and etc. Especially, a method for easy recognition and regeneration of the robot motions made by the operator is proposed. The method is based on the process of accurate modelling, controller design and experimental evaluation. In this study, the model and controller for all motions are obtained individually, where the control system is designed on the robust control framework. And the experiment result with good control performance is presented.

• Journal of Welding and Joining
• /
• 제10권4호
• /
• pp.190-198
• /
• 1992

Among the variety of welding processes available, the flux cored arc welding is one of the most frequently used process, because of its wide range of application and high productivity. The weld joint tracking is indispensable to improve the flexibility of the arc welding robot application for the flux cored arc welding (FCAW) process. In this study, an arc sensor which utilizes the electrical signal obtained from the welding arc itself was developed for weld joint tracking in FCAW. Because a model of the welding arc in flux cored arc welding was required to develop the arc sensor, a mathematical model was proposed by analysing the welding arc behaviour, and also an experimental model by using the factorial experiment and least square method. For overcoming the fluctuation in the welding current signal during tracking the weld joint, it was fitted to a curve which is inversely proportional to a trace of tip-to-workpiece distance by using the quadratic curve-fitting method.

• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.12-18
• /
• 2015

The ultimate goal of developing body is revealed the "lightweight" at latest EuroCarBody conference 2012 and the most core technology is joining process to make lightweight car body design. Accordingly, in this study, the car body assembly line for the assembly process applies to any introduction, particularly in the assembly of aluminum alloy and composite materials applied by the process for the introductory approached. Process were largely classified by welding (laser, arc, resistance, and friction stir welding), bonding (epoxy bonding) and mechanical fastening (FDS, SPR, Bolting and clinching). Applications for each process issues in the case and the applicable award was presented, based on the absolute strength of the test specimens and joining characteristics for comparative analysis were summarized. Finally, through this paper, we would tried to establish the characteristics of the joint for lightweight structure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.575-581
• /
• 1993

This paper deals with analysis of articulated robot manipulator used for Arc welding and Material handling. Compared with present robot of which weight holding capacity is 6kg, this robot shows wider and symmetric working range for it's serial type mechanism. The link length is determined to have widest working range by using optimal simulation. To reduce body's weight, small AC servo motor is adopted and driving peak torque exerted at each joint is reduced by using dynamic analysis. So it is possible to reduce body's weight by 40% compared with the same class's robot and get wider working range. And by adopting modular design concept, each axis is designed to be changed easily for user's special need and repair.