• 제목/요약/키워드: Weight table

검색결과 358건 처리시간 0.032초

테이블 중량 감소 효과에 따른 스틱슬립 개선에 관한 연구 (A Study on Improvement of the Stick-slip Induced an Effect Decrease of the Table Weight)

  • 홍성오;조규재
    • 한국공작기계학회논문집
    • /
    • 제11권5호
    • /
    • pp.7-14
    • /
    • 2002
  • In order to achieve high precision machine tools, the research for performance enhancement of feed drive systems is required. Development of the high speed feed drive system has been a major issue for the past few decades in machine tool indestries. Because table levitation system decrease the table weight, an effect of reaction by weight is minimized and lost motion can be removed at maximum. In case fled system is designed with drive motor, ball screw and support bearing load capacity selection, an effect of decrease of the table weight exist. So, the table weight through an effect of decrease call it into the realization of cost down. Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper table levitation system has been developed for the stick-slip in a fled drive systems.

내진테이블의 중량물 낙하 충격실험 (Weight Drop Impact Tests of Earthquake-Proof Table)

  • 엄태성;허석재;박태원;이상현
    • 한국지진공학회논문집
    • /
    • 제22권7호
    • /
    • pp.369-378
    • /
    • 2018
  • Full-scale seismic retrofit of old and deteriorated masonry buildings requires a lot of cost and time. In such buildings, installing an emergency evacuation space can be considered as an alternative. In this study, requirements of the earthquake-proof table used as an emergency evacuation space for buildings hit by earthquake are investigated. Load conditions required for the table, including the impact effects due to building debris drop, are explained. To investigate the impact effects in more detail, weight drop test is performed for an prototype earthquake-proof table. In the test, the weight of the falling object and free fall height were considered as the main test parameters. The results showed that the duration of impact is very short (0.0226~0.0779sec), and thus the impact forces increase to 15.8~45.2 times the weight of the falling object. Based on these results, design considerations and performance verification criteria of the earthquake-proof table as an emergency evacuation space are given.

효율적인 테이블 메모리를 갖는 가역 가변길이 부호 (A reversible variable length code with an efficient table memory)

  • 임선웅;배황식;정정화
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
    • /
    • pp.133-136
    • /
    • 2000
  • A RVLC(Reversible Variable Length Code) with an efficient table memory is proposed in this paper. In the conventional decoding methods, the weight of symbols and code values are used for the decoding table. These methods can be applied for Huffman decoding. In VLC decoding, many studies have been done for memory efficiency and decoding speed. We propose an improved table construction method for general VLC and RVLC decoding, which uses the transition number of bits within a symbol with an enhanced weight decomposition. In this method, tile table for RVLC decoding can be implemented with a smaller memory

  • PDF

소나무(강원지방·중부지방) 중량추정식 및 중량표 개발 (Development of Weight Estimation Equation and Weight Table in Pinus densiflora Stand (Kangwon and Centr al Distr icts))

  • 강진택;임종수;고치웅;성상민;손영모
    • 한국산림과학회지
    • /
    • 제111권4호
    • /
    • pp.630-643
    • /
    • 2022
  • 본 연구는 소나무의 생중량 및 건중량 추정식을 도출하고, 이를 이용하여 중량표를 작성하기 위해 수행되었다. 생중량 및 건중량을 산정하기 위해 이용한 식은 흉고직경만을 이용하는 1변수식, 흉고직경과 수고를 이용하는 2변수식을 적용하였다. 생중량 및 건중량을 산정하기 위해 각 식은 적합도 지수, 표준오차, 잔차도 등의 통계량을 이용하여 검증하였다. 또한 최적식은 통계적 검증을 거쳤으며, 도출된 계수로서 중량을 계산하여 적용성을 검토하였다. 분석결과, 1변수식에서는 W = bD+cD2이 선정되었으며, 2변수식에서는 때 W = aDbHc가 선정이 되었다. 1변수 최적추정식의 적합도지수는 0.87~0.92 범위였으며, 2변수 중량추정식 적합도지수는 0.94~0.98 범위로, 두 가지 식 모두 적합도가 높았다. 최적 추정식을 이용하여 새로운 중량표를 작성하고 이전 중량표와 비교 분석하였다. 분석결과, 강원지방소나무는 이전 중량표의 값이 더 높은 반면, 중부지방소나무는 새롭게 작성된 중량표의 값이 더 높았다.

토성별 지하수위가 밀, 보리의 생육 및 수량에 미치는 영향 (Effects of Water Table Depth in Different Soil Texture on Growth and Yield of Barley and Wheat)

  • 이홍석;박의호;송현숙;구자환
    • 한국작물학회지
    • /
    • 제40권2호
    • /
    • pp.195-202
    • /
    • 1995
  • 토성과 지하수위를 달리하여 맥류의 생육과 수량에 미치는 반응을 알아보고자 올보리와 그루 밀을 공시하여 1992년 10월∼1993년 6월에 걸쳐 550l의 대형 포트 시험을 수행하였다. 토성을 식양토와 사양토로 조성하여 전 생육기에 거쳐 지하수위가 20cm, 30cm, 40cm, 50cm, 70cm가 되도록 조절하고 비가림 재배를 실시한 결과를 다음과 같다. 1. 간장과 지상부건물중은 지하수위가 높아짐에 따라 감소하였으며 그 정도는 밀보다 보리에서 더욱 크게 나타났고 지하부중에 대한 지상부중 비율은 지하수위가 높아짐에 따라 증대하였는데 그 정도는 보리에서 더욱 뚜렷하였으며 지하수위의 상승은 지상부보다 지하부의 생장에 더욱 크게 영향하였다. 2. 생육후반기(93년 5월 18일)의 신선엽수와 신선엽면적는 보리와 밀 모두 지하수위 30∼40cm 이상에서 감소하였고 가장 많은 신선엽수와 신선엽면적은 사양토는 지하수위 50cm, 식양토는 지하 수위 70cm에서 나타났다. 3. 엽록소 함량은 지하수위가 높아짐에 따라 감소되었는데 보리가 밀보다 토성에 따른 영향이 크게 나타났으며 광합성 능력은 지하수위 20cm에서 뚜렷이 저하하였다. 4. 출수기는 지하수위가 높아지면서 촉진되어 지하수위 20cm의 경우에 사양토에서 보리의 경우 2∼3일, 밀의 경우 4일 정도 빨라졌고 식양토에서는 별로 차이가 없었으며 등숙기는 지하수위가 높아짐에 따라 촉진되어 지하수위 20cm에서 보리의 경우 5∼7일, 밀의 경우 10일 정도 빨라졌다. 5. 수량은 토성에 따라 지하수위 50∼70cm에서 가장 많았으며 지하수위가 높아짐에 따라 감소 되어 지하수위 20cm에서 가장 크게 떨어졌는데 그 감소 정도는 보리에서 71.1%(식양토)∼72.2%(사양토)였고 밀에서 41.0%(식양토)∼60.0%(사양토)이었다. 6. 수량구성요소 면에서 단위면적당 이삭수는 지하수위가 높아짐에 따라 보리와 밀 모두 줄었으나 이삭당립중은 보리에서는 증가했고 밀에서는 감소하였다. 7. 수량과 엽록소 함량간에 보리와 밀 모두 높은 상관관계를 나타내었으며 보리에서는 신선엽면적이, 밀에서는 지상부건물중, 지하부에 대한 지상부중량 비율이 수량과 높은 상관을 보였다. 이상의 결과로 보아 토성에 따라 지하수위 50∼70cm에서 맥류의 생육과 수량은 최대가 되며 비교적 안전한 지하수위는 사양토에서는 30cm, 식양토에서는 40cm라 하겠으며 지하수위 상승에 따른 수량감소비율은 보리에 비하여 밀에서 더욱 크게 나타났다.

  • PDF

조간대 저토 환경과 갈대의 생장 특성 (Sediment Properties and Growth of Phragmites australis in Mud Tidal Flat)

  • 민병미
    • 한국환경복원기술학회지
    • /
    • 제14권3호
    • /
    • pp.57-69
    • /
    • 2011
  • This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

복합소재를 사용한 직선모터용 경량이송테이블 개발 (Development of Lightweight Moving Table for Linear Motor using Composite Materials)

  • 황영국;은인웅;이춘만;서용원
    • 한국정밀공학회지
    • /
    • 제27권4호
    • /
    • pp.7-13
    • /
    • 2010
  • Linear motors are efficient mechanism that offers high speed and positioning accuracy. By eliminating mechanical transmission mechanisms, much higher speeds and greater acceleration can be achieved without backlash or excessive friction. However, an important disadvantage of linear motor system is its high power loss and heating up of motor and neighboring machine components on operation. Therefore, it is necessary to design moving table with high stiffness, high efficiency and light weight construction. This paper presents the development of moving table using composite material. In order to develop light weight construction of moving table, finite element analysis is performed to find best moving table construction and composite stacking sequence. NASTRAN and MINITAB were used as the optimizer. A prototype for the moving table using composite material was created.

Top dressing이 bentgrasss ( Agrostis palustris Huds. ) 의 thatch 소실에 미치는 영향 (Effect of top dressing on the tharch losses in Bentgrass ( Agrostis Palustris Huds. ))

  • 이주삼;윤용범;김성규;윤익석
    • 한국초지조사료학회지
    • /
    • 제7권1호
    • /
    • pp.37-41
    • /
    • 1987
  • The purpose of this study is to clarify the effect of top dressing on the thatch losses in bentgrass (Agrostis palustris). Top dressing materials used were clay loam, sand, zeolite, and sawdust. Data were taken on July 10 ($T_1$), Aug. 7 (($T_2$ ) and Sept. 4 (($T_3$) respectively. The results are summarized as follows: 1. The dry weight of accumulated thatch was significantly different between treatments and dates of survery, and for the interaction of treatment x date of survey. 2. The dry weight of accumulated thatch showed a tendency to decrease as growth progressed in all treatments. (Table 1) The dry weight of accumulated thatch was the smallest at sand but the largest at clay loam in each date of survey. 3. The losses rate of accumulated thatch showed a tendency to slightly increase as affected by top dressing materials. (Table 2) Sand showed a significantly higher losses rate of accumulated thatch than that of other treatments. 4. The dry weight of accumulated thatch showed a significant negative correlation (p<0.01) with the losses rate of accumulated thatch. (Fig. 1) 5. Turf coverage was significant difference between treatments and dates of survey. 6. Turf coverage showed a tendency to increase as growth progressed in all treatments. (Table 3) 7. Turf coverage indicated significant negative correlation (p<0.001) with the dry weight of accumulated thatch. (Fig. 2)

  • PDF

피보험체계측치(被保險體計測値)의 평가(評價)에 관한 연구(硏究) 제1보(第1報) 체격(體格) (A Study on the Rating of the Insureds' Anthropometric Data I. Build)

  • 임영훈
    • 보험의학회지
    • /
    • 제3권1호
    • /
    • pp.103-141
    • /
    • 1986
  • The present study was undertaken to establish the decision standard of builds for the insured by using the ratio of weight-for-height as build index. Materials being examined were the ratio of weight-for-height being calculated from the actually measured heights and weights of a total of 15,838 insured persons who were examined medically at Honam Medical Department of Dong Bang Life Insurance Company, Ltd. from June, 1979 to September, 1985. The ratio of weight-for-height is calculated by the following formula. The ratio of weight-for-height(%)=$\frac{weight(kg){\times}100}{\{height(cm)-100\}{\times}0.9(kg)$ The results were as follows: 1. The distribution of the ratio of weight. for-height of the 15,838 insureds follows Log normal distribution being skewed to the left(the direction of underweight). 2. The ratio of weight-for-height were Log transformed to lead to a sym metrical pattern of distribution in which statistical rules are known to be applied more exactly. Thereafter, the establishment of dicision standard of builds was undertaken by using the log of the ratio of weight-for-height as build index. Through all ages in male, the ratio of weight-for-height indicating the range of standard lives including slight overweighted and underweighted lives besides normal lives is 80-130%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$ ; in female, 85-135%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$. Through all ages in male, the ratio of weight-for-height indicating the initial level of super-overweighted and super-underweighted lives is 130-150% and 75-80%,and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40% and M-25% respectively;in female, 140-160% and 75-80%, and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40%-+50% and M-25% respectively. 3. Author's rating table model for builds(a table of weight per height) is proposed. On the table, the ratings for builds, i. e. standard, super-weighted and super-underweighted lives, are listed.

  • PDF

가역가변길이 부호를 위한 테이블 압축방법 (A Table Compression Method for Reversible Variable Length Code)

  • 임선웅;배황식;정정화
    • 대한전자공학회논문지SP
    • /
    • 제38권3호
    • /
    • pp.316-324
    • /
    • 2001
  • 본 논문에서는 가역가변길이 부호를 테이블 메모리에 효율적으로 저장하는 방법을 제안한다. 여러개의 부호들을 적은 개수의 값들로 테이블을 구성하는 새로운 알고리듬으로, 가역가변길이 부호의 부호내의 비트 천이개수와 부호 구성 트리에서의 레벨을 이용하는 TNWT(Transition Number and Weight of Tree)방법을 제안한다. 압축에 앞서 가역가변길이 부호들의 가중치와 천이개수를 구하고, 신장된 값들이 서로 구분이 안되는 경우를 방지하기 위해 테이블의 값들을 재배열한다. 재배열이 끝난 배열의 값들을 세 개씩 묶어 압축된 테이블을 얻는다. 압축된 테이블은 부호의 천이개수와 가중치를 이용하여 복호해 낼 수 있다. 이러한 방법을 통하여 기존의 방법보다 약 20% 적은 크기로 테이블 메모리를 구성하고, 압축된 테이블로 복호가 가능함을 확인하였다.

  • PDF